Hi folks, FedoraCore5_64 Grub on this box did not work ever since running "yum update" updating "kernel-2.6.16-1.2133_FC5" a few days ago. On starting the PC only with "GRUB" popup on a black screen without other messages. Typing does not work, keystroke without function. I have to run a boot floppy to start the box/PC. # uname -a Linux localhost.localdomain 2.6.16-1.2133_FC5 #1 SMP Tue Jun 6 00:51:53 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux # rpm -qa kernel kernel-2.6.16-1.2133_FC5 kernel-2.6.16-1.2122_FC5 The boot floppy was created on this box with # grub grub> root (hda0,0) setup (fd0) I tried to fix the problem with the boot floppy without success. Steps performed as follows; # fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 1734 13823932+ 83 Linux /dev/sda3 1735 3008 10233405 83 Linux /dev/sda4 3009 9729 53986432+ 5 Extended /dev/sda5 3009 3262 2040223+ 82 Linux swap / Solaris HD - SATA interface /boot on /dev/sda1 After starting the box/PC with the boot floppy 1) On Konsole; # grub Probing devices to guess BIOS drives. This may take a long time. GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename.] grub> root (hd0,0) root (hd0,0) Filesystem type is ext2fs, partition type 0x83 grub> setup (hd0,0) setup (hd0,0) Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... yes Checking if "/grub/stage2" exists... yes Checking if "/grub/e2fs_stage1_5" exists... yes Running "embed /grub/e2fs_stage1_5 (hd0,0)"... failed (this is not fatal) Running "embed /grub/e2fs_stage1_5 (hd0,0)"... failed (this is not fatal) Running "install /grub/stage1 (hd0,0) /grub/stage2 p /grub/grub.conf "... succeeded Done. Exited grub and rebooted the box/PC. Still failed to boot the box/PC with only "GRUB" displayed on a black screen, no other messages. Keystroke did not work. 2) On Konsole # grub Probing devices to guess BIOS drives. This may take a long time. GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename.] grub> root (fd0) root (fd0) Filesystem type unknown, using whole disk grub> setup (hd0,0) setup (hd0,0) Error 17: Cannot mount selected partition Failed. Whether I need to mount the /boot partition (/dev/sda1) first before running "grub"? The HD is working. Would it make confusion resulting in re-installing the complete FC5_64. Besides I can't mount the boot floppy, either as root or as user, to copy "grub" from it on /boot $ cat /etc/fstab ... .... /dev/fd0 /mnt/floppy auto noauto,owner,user,kudzu 0 0 However I can mount a floppy with .txt files on it only by running "mount /mnt/floppy" It looks strange to me. Would the boot floppy only contain an image. Please advise. TIA B.R. SL -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
