On Tue, 2006-05-30 at 21:25 -0600, Philip Prindeville wrote: > I'm running FC3 on an MSI-7142 (K8MM-V motherboard), and using > the two serial ports on the m/b. I used the stock > out-of-the-shrinkwrap settings for most hardware (except for the sound > board and X drivers), and things have worked fine. > > But... when connecting to a router's console at 115200 with either > RTS/CTS or XON/XOFF flow control, I'm seeing dropped characters. Looking at a friend's router, his one's serial port connection *ONLY* had the three-wire type of serial connection. So his couldn't possibly use hardware handshaking (RTS/CTS). Perhaps yours can't too? Also, check what your router says about its maximum port speeds and handshaking protocols. -- (Currently running FC4, occasionally trying FC5.) Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
