On 5/26/06, Joao Batista Gomes de Freitas <boaojatista@xxxxxxxxx> wrote:
Hi, This is my first email for this list and hope it is the beginning of a very useful and friendly exchange. I have installed my first fedora OS
Welcome!
(FC5 - 32 bits) just a few weeks ago in my new computer (my wife thinks that it has cost half the real figures). No troubles at all, but then I ran "yum update" and found a new kernel version (2.6.16-1.2096). This is my box hardware : AMD 64 3000+
When you feel adventurous, you should try the 64-bit version ; ). It works quite well.
MoBo ASUS A8N-E 2 S-ATA Hd Samsung SP2504C (RAID 0 - VolGroup00) 1 IBM IDE - VolGroup01 nVidia CK804 Serial ATA Controller RAID 0 enabled (BIOS) VolGroup00 only
Hmmm, this is a red flag of sorts. This is sometimes termed "fake RAID" since it is basically a software RAID with limited hardware support. It is also very newly supported in Linux. RAID 0 is also not really RAID since it's not redundant and I think you can do basically the same thing (create one big drive/partition) with LVM if you really want that. Unless there is some reason you need it, I'd suggest turning this off. Of course, you'll have to reinstall afterwards if you do...
LVM enabled Every time I try to boot a version 2.6.16* (it is happening with any other after 1.2096) it panics. Here is the message : Root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.16-1.2122_FC5 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Remove the "rhgb quiet" from this command line to possibly get more information on what is going on. You can edit this in /etc/grub.conf or at the GRUB boot screen by pressing 'a' when selecting a kernel to boot.
[Linux-bzImage, setup=0x1e00, size=0x16e862] initrd /initrd-2.6.16-1.2122_FC5.img [Linux-initrd @ 0x37e3c000, 0x1b3698 bytes] Uncompressing Linux... Ok, booting the kernel. Red Hat nash version 5.0.32 starting device-mapper: dm-stripe: Target length not divisible by chunk size device-mapper: reload ioctl failed: Invalid argument
Something is wrong with dm. This is where removing the "quiet" may help some. Then again, there might not be much more to see, but it's worth a shot.
Unable to open /dev/mapper/nvidia_acaafeee – unrecognised disk label. Reading all physical volumes. This may take a while... No volume groups found
First you must read the RAID device before you can see anything else.
Unable to find volume group "VolGroup00" Unable to access resume device (/dev/VolGroup00/LogVol01) mount: could not find filesystem `/dev/root` setuproot: moving /dev failed: No such file or directory setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory switchroot: mount failed: No such file or directory Kernel panic – not syncing: Attempted to kill init! I was suspicious of initrd. I have created my own versions of intrd making sure that all the important stuff (sata_nv, dm*,..)
The initrds are usually good to include everything that is needed.
were available but got no luck. then I went to forums (here are the threads : http://www.linuxquestions.org/questions/showthread.php?t=447666 and http://forum.fedoraforum.org/forum/showthread.php?t=110478) and have follow the clues received (udev and so). At that time I was thinking of an error at updating process, them I installed a new IDE disk (please, don't tell missus) and now FC5 is installed in both VolGroup disks and 2 kernel version in each (2.6.15-1.2054 and 2.6.16-1.2122). So now when it boots the 2.6.15.-1.2054 version, I have no problems it doesn't matter from which disk I am booting. But when I use kernel version 2.6.16-1.2122 it issues the same error related to VolGroup00 and the only difference is that when I use IBM disk it boots anyway because it does not need anything from VolGroup00. So I googled for nVidia CK804 sata_nv FC5 and found many bugs posted, some fixed others not. I also have posted a bug at https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=192165. Now I am convinced that there is bug in libsata or sata_nv or dm*, i am not sure in which of them.
Like above, the issue is probably with the dmraid (I think that's the right program) reading your RAID setup. Especially since you don't have any issues with the new disk (which I assume is not RAIDed in any way). It could be a bug or just something that has changed with the new version. I did a quick google search on your error message above and found this: http://www.redhat.com/archives/dm-devel/2006-March/msg00140.html I've not dealt with dmraid any, but if there is some way for you to set up your size to be an even multiple of the chunk-size, then it seems like it might work. Though, as I mentioned above, I don't really see what the RAID buys you.
OK. I am not expecting to have the solution as zap, but I would appreciate if somebody could give me a help in speeding up to get it fixed. I want to install that wonderful drivers for my new Nvidia Geforce.(oh. missus, again). Is it fine to try to contact the guys from
For when you get a kernel that will work with both your RAID and the nvidia driver, look up http://rpm.livna.org/ for the nvidia drivers nicely packaged, if you have not yet found it.
RedHat directly ? I mean, the names listed in the bugzilla ? I am not sure if that is the right thing to do.
If you post comments to the Bugzilla entry, they get emailed to the pertinent people. That or on this list are probably the ways to go.
Hope to hear from you soon and thank you for your attention. Next one will be shorter, I promise.
Haha, no problem. Jonathan -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
