On Thu, 2006-05-18 at 23:52 +0200, Tomas Larsson wrote: > > -----Original Message----- > > From: fedora-list-bounces@xxxxxxxxxx > > [mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of Randy Wyatt > > Sent: Thursday, May 18, 2006 9:01 PM > > To: For users of Fedora Core releases > > Subject: Re: FC4 And Dlink DWL-G630 WiFi card > > > > On 5/18/06, Tomas Larsson <tomas@xxxxxxx> wrote: > > > Think I found it. > > > > > > It seems that there is a native linux-driver avaible for > > this card As > > > far as I can tell it is rev E1 card. According to > > MadWiFi's homepage > > > it is using a RaLink chipset. > > > Which seems to be confirmed by the output from lspci. > > > > > > Now I have downloaded the tar-file (RT61) from RaLinks > > homepage, but > > > obviously it is source code. > > > > > > My question is then, is there anything more to be done, apart from > > > compiling the driver, do I need to re-configure the kernel or do I > > > need to recompile it. It is a standard stock FC4 DVD-install. > > > I guess I need to do a yum update first. > > > Any recommendations for installing the TAR-file, compiling and > > > installing the driver would help much. > > > > > > > > > > > > With best regards > > > > > > Tomas Larsson > > > Sweden > > > > > > Verus Amicus Est Tamquam Alter Idem > > > > > Now, the driver is compiled, but I'm supposed to edit /etc/modules.conf > > Obviously it has a different name and location in FC, but which and where /etc/modprobe.conf: alias wlan0 name-of-driver (without the .ko) bit ---------------------------------------------------------------------- - Rick Stevens, Senior Systems Engineer rstevens@xxxxxxxxxxxxxxx - - VitalStream, Inc. http://www.vitalstream.com - - - - We look for things. Things that make us go! - ---------------------------------------------------------------------- -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
