On Monday 08 May 2006 18:32, Lonni J Friedman escreveu o seguinte:
> On 5/8/06, Josenildo Marques <josenildo.marques@xxxxxxxxx> wrote:
> > On Monday 08 May 2006 18:14, Lonni J Friedman escreveu o seguinte:
> > > > > Are you really on a 10M/half duplex network?
> > > >
> > > > Well, it's an ADSL connection and the IP address changes every time
> > > > it connects to my ISP...
> > >
> > > That might explain 10Mb, but not the half duplex. Have you tried
> > > forcing it to full duplex?
> >
> > You got me there... I have no idea how I can change that.
> > Could you help me ?
>
> ethtool should let you set the duplex setting. what kind of NIC are you
> using?
I don't know exactly what you mean...I had to google a bit :-)
And tried the commands below...
The network card is
May 8 14:51:59 localhost kernel: eth0: RealTek RTL8139 at 0xd0834000,
00:08:54:25:9d:b2, IRQ 16
# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:08:54:25:9D:B2
inet6 addr: fe80::208:54ff:fe25:9db2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7035 errors:1 dropped:0 overruns:0 frame:0
TX packets:6491 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6789791 (6.4 MiB) TX bytes:908291 (887.0 KiB)
Interrupt:16 Base address:0xe000
# ip link show
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:08:54:25:9d:b2 brd ff:ff:ff:ff:ff:ff
3: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
4: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP> mtu 1492 qdisc pfifo_fast qlen 3
link/ppp
TIA
--
Josenildo Marques
usuário Linux registrado No. 341648
blog http://monomito.wordpress.com/
*************************************
"Art is the human disposition of sensible or intelligible matter for an
esthetic end."
James Joyce
*************************************
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
