I just replaced the drive in my laptop. I wanted to get some files off of the old one so I put it into a USB enclosureand plugged it into my desktop machine. I was able to access the files in the Logical Volume on the old drive using the instructions in an article in this month's Linux Journal. Like so: First I got the device info off the drive: dd if=/dev/sdh3 bs=512 count=255 skip=1 of=/etc/lvm/backup/VolGroup01 and edited VolGroup01 to remove all the binary cruft, and label the physical device correctly. then: vgcfgrestore -r VolGroup01 VolGroup01 vgchange VolGroup01 -a y and the filesystem was in /dev/VolGroup01/LogVol00. So far so good. I unmounted the filesystem, and removed the USB drive. There was one problem though. Now my desktop machine will not boot without the USB drived plugged into it. It won't even get as far as loading grub. The machine goes through the power on bios screens, identifies the internal (SATA) drive and then hangs with a blinking cursor. I went into the bios setup, and the USB drive is not in the boot order. I even reinstalled grub with the USB drive disconnected. So, what did I do wrong, and how do I fix it? Thanks. Derek Tattersall -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
