Miguel, This is the output when the keys start working. I don't have one with the keys NOT working, since, I cannot login when the keys are not working. Jim Miguel Angel Perez wrote: > Hi, two tips: > > This is the output of dmesg from init to the point where your keys start > working? > > An attached copy of /var/log/messages content when your keys start > working can be usefull too (please don't paste it in the body). > > 2008/12/14 Jim Duda <jim@xxxxxxxxxxxx > <mailto:jim@xxxxxxxxxxxx>> > > Miguel Angel Perez wrote: > > You can also attach them in your next reply so people in this > list can also take a look at it. > > > > Good point Miguel, my dmesg logs are attached. > > Jim > > Initializing cgroup subsys cpuset > Linux version 2.6.27.7-53.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 > 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu Nov 27 02:05:02 EST 2008 > Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > Centaur CentaurHauls > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) > BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003bf00000 (usable) > BIOS-e820: 000000003bf00000 - 000000003bf16000 (ACPI data) > BIOS-e820: 000000003bf16000 - 000000003bf80000 (ACPI NVS) > BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > DMI present. > last_pfn = 0x3bf00 max_arch_pfn = 0x3ffffffff > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > init_memory_mapping > 0000000000 - 003be00000 page 2M > 003be00000 - 003bf00000 page 4k > kernel direct mapping tables up to 3bf00000 @ 8000-b000 > last_map_addr: 3bf00000 end: 3bf00000 > RAMDISK: 37c7e000 - 37fefa22 > Presario F700: using 0xed I/O delay port > ACPI: RSDP 000F8920, 0014 (r0 HP ) > ACPI: RSDT 3BF0D36A, 003C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) > ACPI: FACP 3BF15CCE, 0074 (r1 HP MCP51M 6040000 PTL_ F4240) > ACPI: DSDT 3BF0D3A6, 8928 (r1 HP MCP51M 6040000 MSFT 3000000) > ACPI: FACS 3BF16FC0, 0040 > ACPI: SSDT 3BF15D42, 01C4 (r1 HP POWERNOW 6040000 LTP 1) > ACPI: MCFG 3BF15F06, 003C (r1 HP MCFG 6040000 LTP 0) > ACPI: HPET 3BF15F42, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) > ACPI: APIC 3BF15F7A, 005E (r1 HP APIC 6040000 LTP 0) > ACPI: BOOT 3BF15FD8, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) > ACPI: DMI detected: Hewlett-Packard > Scanning NUMA topology in Northbridge 24 > No NUMA configuration found > Faking a node at 0000000000000000-000000003bf00000 > Bootmem setup node 0 0000000000000000-000000003bf00000 > NODE_DATA [0000000000009000 - 000000000001dfff] > bootmap [000000000001e000 - 00000000000257df] pages 8 > (6 early reservations) ==> bootmem [0000000000 - 003bf00000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - > 0000001000] > #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - > 0000008000] > #2 [0000200000 - 000096fdac] TEXT DATA BSS ==> [0000200000 - > 000096fdac] > #3 [0037c7e000 - 0037fefa22] RAMDISK ==> [0037c7e000 - > 0037fefa22] > #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - > 0000100000] > #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - > 0000009000] > found SMP MP-table at [ffff8800000f8950] 000f8950 > [ffffe20000000000-ffffe20000dfffff] PMD -> > [ffff880001200000-ffff880001ffffff] on node 0 > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > DMA32 0x00001000 -> 0x00100000 > Normal 0x00100000 -> 0x00100000 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000000 -> 0x0000009d > 0: 0x00000100 -> 0x0003bf00 > On node 0 totalpages: 245405 > DMA zone: 1934 pages, LIFO batch:0 > DMA32 zone: 238107 pages, LIFO batch:31 > Detected use of extended apic ids on hypertransport bus > ACPI: PM-Timer IO Port: 0x1008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to flat > ACPI: HPET id: 0x10de8201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > SMP: Allowing 2 CPUs, 0 hotplug CPUs > PM: Registered nosave memory: 000000000009d000 - 000000000009e000 > PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 > PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 > Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) > PERCPU: Allocating 64928 bytes of per cpu data > NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 > Built 1 zonelists in Node order, mobility grouping on. Total pages: > 240041 > Policy zone: DMA32 > Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > TSC: PIT calibration confirmed by PMTIMER. > TSC: using PIT calibration value > Detected 1707.730 MHz processor. > spurious 8259A interrupt: IRQ7. > Console: colour VGA+ 80x25 > console [tty0] enabled > Checking aperture... > No AGP bridge found > Node 0: aperture @ a47e000000 size 32 MB > Aperture beyond 4GB. Ignoring. > Memory: 955740k/982016k available (2848k kernel code, 25880k > reserved, 1583k data, 1264k init) > CPA: page pool initialized 1 of 1 pages preallocated > SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 > hpet clockevent registered > Calibrating delay loop (skipped), value calculated using timer > frequency.. 3415.46 BogoMIPS (lpj=1707730) > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > Initializing cgroup subsys devices > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > CPU 0/0 -> Node 0 > tseg: 003bf80000 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > using C1E aware idle routine > ACPI: Core revision 20080609 > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor TK-53 stepping 01 > Using local APIC timer interrupts. > APIC timer calibration result 12556851 > Detected 12.556 MHz APIC timer. > Booting processor 1/1 ip 6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3415.33 BogoMIPS > (lpj=1707666) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > CPU 1/1 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor TK-53 stepping 01 > Brought up 2 CPUs > Total of 2 processors activated (6830.79 BogoMIPS). > System has AMD C1E enabled > Switch to broadcast mode on CPU1 > sizeof(vma)=176 bytes > sizeof(page)=56 bytes > sizeof(inode)=560 bytes > sizeof(dentry)=208 bytes > sizeof(ext3inode)=760 bytes > sizeof(buffer_head)=104 bytes > sizeof(skbuff)=232 bytes > sizeof(task_struct)=5856 bytes > CPU0 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 0 1 > domain 1: span 0-1 level NODE > groups: 0-1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level CPU > groups: 1 0 > domain 1: span 0-1 level NODE > groups: 0-1 > Switch to broadcast mode on CPU0 > net_namespace: 1552 bytes > Booting paravirtualized kernel on bare hardware > Time: 15:10:25 Date: 12/14/08 > NET: Registered protocol family 16 > No dock devices found. > node 0 link 0: io port [1000, fffff] > TOM: 0000000040000000 aka 1024M > node 0 link 0: mmio [e0000000, efffffff] > node 0 link 0: mmio [a0000, bffff] > node 0 link 0: mmio [40000000, fe0bffff] > bus: [00,ff] on node 0 link 0 > bus: 00 index 0 io port: [0, ffff] > bus: 00 index 1 mmio: [40000000, fcffffffff] > bus: 00 index 2 mmio: [a0000, bffff] > ACPI: bus type pci registered > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6 > PCI: MCFG area at e0000000 reserved in E820 > PCI: Using MMCONFIG at e0000000 - e06fffff > PCI: Using configuration type 1 for base access > ACPI: EC: Look up EC in DSDT > ACPI: BIOS _OSI(Linux) query ignored via DMI > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: EC: non-query interrupt received, switching to interrupt mode > ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 > ACPI: EC: driver started in interrupt mode > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:02.0: PME# disabled > pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:03.0: PME# disabled > PCI: 0000:00:05.0 reg 10 32bit mmio: [b2000000, b2ffffff] > PCI: 0000:00:05.0 reg 14 64bit mmio: [c0000000, cfffffff] > PCI: 0000:00:05.0 reg 1c 64bit mmio: [b1000000, b1ffffff] > PCI: 0000:00:05.0 reg 30 32bit mmio: [0, 1ffff] > PCI: 0000:00:0a.0 reg 10 io port: [1d00, 1d7f] > PCI: 0000:00:0a.1 reg 20 io port: [3040, 307f] > PCI: 0000:00:0a.1 reg 24 io port: [3000, 303f] > pci 0000:00:0a.1: PME# supported from D3hot D3cold > pci 0000:00:0a.1: PME# disabled > PCI: 0000:00:0a.3 reg 10 32bit mmio: [b0040000, b007ffff] > PCI: 0000:00:0b.0 reg 10 32bit mmio: [b0004000, b0004fff] > pci 0000:00:0b.0: supports D1 > pci 0000:00:0b.0: supports D2 > pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:0b.0: PME# disabled > PCI: 0000:00:0b.1 reg 10 32bit mmio: [b0005000, b00050ff] > pci 0000:00:0b.1: supports D1 > pci 0000:00:0b.1: supports D2 > pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:0b.1: PME# disabled > PCI: 0000:00:0d.0 reg 20 io port: [3080, 308f] > PCI: 0000:00:0e.0 reg 10 io port: [30c0, 30c7] > PCI: 0000:00:0e.0 reg 14 io port: [30b4, 30b7] > PCI: 0000:00:0e.0 reg 18 io port: [30b8, 30bf] > PCI: 0000:00:0e.0 reg 1c io port: [30b0, 30b3] > PCI: 0000:00:0e.0 reg 20 io port: [3090, 309f] > PCI: 0000:00:0e.0 reg 24 32bit mmio: [b0006000, b0006fff] > PCI: 0000:00:10.1 reg 10 32bit mmio: [b0000000, b0003fff] > pci 0000:00:10.1: PME# supported from D3hot D3cold > pci 0000:00:10.1: PME# disabled > PCI: 0000:00:14.0 reg 10 32bit mmio: [b0008000, b0008fff] > PCI: 0000:00:14.0 reg 14 io port: [30e0, 30e7] > pci 0000:00:14.0: supports D1 > pci 0000:00:14.0: supports D2 > pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:14.0: PME# disabled > PCI: bridge 0000:00:02.0 io port: [4000, 4fff] > PCI: bridge 0000:00:02.0 32bit mmio: [b4000000, b7ffffff] > PCI: bridge 0000:00:02.0 64bit mmio pref: [d0000000, d01fffff] > PCI: 0000:03:00.0 reg 10 64bit mmio: [b8000000, b8003fff] > pci 0000:03:00.0: supports D1 > pci 0000:03:00.0: supports D2 > PCI: bridge 0000:00:03.0 32bit mmio: [b8000000, bbffffff] > pci 0000:00:10.0: transparent bridge > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] > ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15) > ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, > disabled. > ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, > disabled. > ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *11 > ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, > disabled. > ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10 > ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *10 > ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11 > ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7 > ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *10 > ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, > disabled. > ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, > disabled. > ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, > disabled. > ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, > disabled. > ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5 > ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *10 > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 > hpet0: 3 32-bit timers, 25000000 Hz > Switched to high resolution mode on CPU 0 > Switched to high resolution mode on CPU 1 > tracer: 1286 pages allocated for 65536 entries of 80 bytes > actual entries 65586 > ACPI: RTC can wake from S4 > system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved > system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved > system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved > system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved > system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved > system 00:03: iomem range 0xe0000000-0xefffffff could not be reserved > system 00:04: ioport range 0x1000-0x107f has been reserved > system 00:04: ioport range 0x1080-0x10ff has been reserved > system 00:04: ioport range 0x1400-0x147f has been reserved > system 00:04: ioport range 0x1480-0x14ff has been reserved > system 00:04: ioport range 0x1800-0x187f has been reserved > system 00:04: ioport range 0x1880-0x18ff has been reserved > system 00:04: ioport range 0x2000-0x203f has been reserved > system 00:05: ioport range 0x360-0x361 has been reserved > system 00:05: ioport range 0x380-0x383 has been reserved > system 00:05: ioport range 0x4d0-0x4d1 has been reserved > pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:02.0: IO window: 0x4000-0x4fff > pci 0000:00:02.0: MEM window: 0xb4000000-0xb7ffffff > pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff > pci 0000:00:03.0: PCI bridge, secondary bus 0000:03 > pci 0000:00:03.0: IO window: disabled > pci 0000:00:03.0: MEM window: 0xb8000000-0xbbffffff > pci 0000:00:03.0: PREFETCH window: disabled > pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 > pci 0000:00:10.0: IO window: disabled > pci 0000:00:10.0: MEM window: disabled > pci 0000:00:10.0: PREFETCH window: disabled > pci 0000:00:02.0: setting latency timer to 64 > pci 0000:00:03.0: setting latency timer to 64 > pci 0000:00:10.0: setting latency timer to 64 > bus: 00 index 0 io port: [0, ffff] > bus: 00 index 1 mmio: [0, ffffffffffffffff] > bus: 01 index 0 io port: [4000, 4fff] > bus: 01 index 1 mmio: [b4000000, b7ffffff] > bus: 01 index 2 mmio: [d0000000, d01fffff] > bus: 01 index 3 mmio: [0, 0] > bus: 03 index 0 mmio: [0, 0] > bus: 03 index 1 mmio: [b8000000, bbffffff] > bus: 03 index 2 mmio: [0, 0] > bus: 03 index 3 mmio: [0, 0] > bus: 07 index 0 mmio: [0, 0] > bus: 07 index 1 mmio: [0, 0] > bus: 07 index 2 mmio: [0, 0] > bus: 07 index 3 io port: [0, ffff] > bus: 07 index 4 mmio: [0, ffffffffffffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 6, 262144 bytes) > TCP established hash table entries: 131072 (order: 9, 2097152 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > checking if image is initramfs... it is > Freeing initrd memory: 3526k freed > Simple Boot Flag at 0x36 set to 0x1 > audit: initializing netlink socket (disabled) > type=2000 audit(1229267425.503:1): initialized > HugeTLB registered 2 MB page size, pre-allocated 0 pages > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > msgmni has been set to 1873 > SELinux: Registering netfilter hooks > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci 0000:00:00.0: Enabling HT MSI Mapping > pci 0000:00:02.0: Enabling HT MSI Mapping > pci 0000:00:03.0: Enabling HT MSI Mapping > pci 0000:00:05.0: Boot video device > pci 0000:00:09.0: Enabling HT MSI Mapping > pci 0000:00:0e.0: Enabling HT MSI Mapping > pci 0000:00:10.0: Enabling HT MSI Mapping > pci 0000:00:10.1: Enabling HT MSI Mapping > pcieport-driver 0000:00:02.0: setting latency timer to 64 > pcieport-driver 0000:00:02.0: found MSI capability > pci_express 0000:00:02.0:pcie00: allocate port service > pci_express 0000:00:02.0:pcie03: allocate port service > pcieport-driver 0000:00:03.0: setting latency timer to 64 > pcieport-driver 0000:00:03.0: found MSI capability > pci_express 0000:00:03.0:pcie00: allocate port service > pci_express 0000:00:03.0:pcie03: allocate port service > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > acpiphp_glue: can't get bus number, assuming 0 > input: Power Button (FF) as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > ACPI: Power Button (CM) [PWRB] > input: Sleep Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 > ACPI: Sleep Button (CM) [SLPB] > input: Lid Switch as > /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 > ACPI: Lid Switch [LID] > ACPI: processor limited to max C-state 1 > processor ACPI0007:00: registered as cooling_device0 > processor ACPI0007:01: registered as cooling_device1 > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [THRM] (49 C) > hpet_resources: 0xfed00000 is busy > Non-volatile memory driver v1.2 > Linux agpgart interface v0.103 > Serial: 8250/16550 driver4 ports, IRQ sharing enabled > brd: module loaded > input: Macintosh mouse button emulation as /devices/virtual/input/input4 > PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input5 > rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one year, y3k, hpet irqs > cpuidle: using governor ladder > cpuidle: using governor menu > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > TCP cubic registered > Initializing XFRM netlink socket > NET: Registered protocol family 17 > registered taskstats version 1 > Magic number: 4:296:184 > acpi LNXTHERM:00: hash matches > Freeing unused kernel memory: 1264k freed > Write protecting the kernel read-only data: 4060k > ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 > ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, > high) -> IRQ 23 > ehci_hcd 0000:00:0b.1: setting latency timer to 64 > ehci_hcd 0000:00:0b.1: EHCI Host Controller > ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:0b.1: debug port 1 > ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported > ehci_hcd 0000:00:0b.1: irq 23, io mem 0xb0005000 > ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.27.7-53.fc9.x86_64 ehci_hcd > usb usb1: SerialNumber: 0000:00:0b.1 > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 > ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, > high) -> IRQ 22 > ohci_hcd 0000:00:0b.0: setting latency timer to 64 > ohci_hcd 0000:00:0b.0: OHCI Host Controller > ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 8 ports detected > usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: OHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.27.7-53.fc9.x86_64 ohci_hcd > usb usb2: SerialNumber: 0000:00:0b.0 > USB Universal Host Controller Interface driver v3.0 > SCSI subsystem initialized > Driver 'sd' needs updating - please use bus_type methods > libata version 3.00 loaded. > sata_nv 0000:00:0e.0: version 3.5 > sata_nv 0000:00:0e.0: enabling device (0005 -> 0007) > ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 > sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 21 (level, > high) -> IRQ 21 > sata_nv 0000:00:0e.0: setting latency timer to 64 > scsi0 : sata_nv > scsi1 : sata_nv > ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 21 > ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 21 > Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: > 0xa04713/0x200000 > input: SynPS/2 Synaptics TouchPad as > /devices/platform/i8042/serio1/input/input6 > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ATA-7: FUJITSU MHW2080BH PL, 891F, max UDMA/100 > ata1.00: 156301488 sectors, multi 16: LBA48 > ata1.00: configured for UDMA/100 > isa bounce pool size: 16 pages > scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2080B 891F PQ: 0 > ANSI: 5 > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 sda2 > sd 0:0:0:0: [sda] Attached SCSI disk > pata_acpi 0000:00:0d.0: setting latency timer to 64 > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: > dm-devel@xxxxxxxxxx > <mailto:dm-devel@xxxxxxxxxx> > pata_amd 0000:00:0d.0: version 0.3.10 > pata_amd 0000:00:0d.0: setting latency timer to 64 > scsi2 : pata_amd > scsi3 : pata_amd > ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14 > ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15 > ata3.00: ATAPI: Optiarc DVD RW AD-7530B, NH02, max MWDMA2 > ata3: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) > ACPI=0x39f (120:600:0x12) > ata3.00: configured for MWDMA2 > ata4: port disabled. ignoring. > scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NH02 PQ: 0 > ANSI: 5 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: Disabled at runtime. > SELinux: Unregistering netfilter hooks > type=1404 audit(1229267435.383:2): selinux=0 auid=4294967295 > ses=4294967295 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > scsi 2:0:0:0: Attached scsi generic sg1 type 5 > ndiswrapper version 1.53 loaded (smp=yes, preempt=no) > input: PC Speaker as /devices/platform/pcspkr/input/input7 > Driver 'sr' needs updating - please use bus_type methods > sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 2:0:0:0: Attached scsi CD-ROM sr0 > i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 > i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 > forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. > ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 > forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, > high) -> IRQ 20 > forcedeth 0000:00:14.0: setting latency timer to 64 > nv_probe: set workaround bit for reversed mac addr > ACPI: Battery Slot [BAT0] (battery present) > ACPI: AC Adapter [ACAD] (off-line) > ACPI: WMI: Mapper loaded > acpi device:24: registered as cooling_device2 > input: Video Bus as > /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/input/input8 > forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr > 00:1b:24:b8:68:e2 > forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3 > ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) > acpi device:2a: registered as cooling_device3 > input: Video Bus as > /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:27/device:28/input/input9 > ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) > ndiswrapper (link_pe_images:575): fixing KI_USER_SHARED_DATA address > in the driver > ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5 > <http://4.100.15.5>) loaded > ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 19 > ndiswrapper 0000:03:00.0: PCI INT A -> Link[LK1E] -> GSI 19 (level, > high) -> IRQ 19 > ndiswrapper 0000:03:00.0: setting latency timer to 64 > ndiswrapper: using IRQ 19 > wlan0: ethernet device 00:1a:73:5b:15:cf using NDIS driver: bcmwl5, > version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network > Adapter', 14E4:4311.5.conf > wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, > WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK > nvidia 0000:00:05.0: power state changed by ACPI to D0 > ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 > nvidia 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) > -> IRQ 18 > nvidia 0000:00:05.0: setting latency timer to 64 > NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.15 Fri Oct > 31 14:32:55 PST 2008 > usbcore: registered new interface driver ndiswrapper > ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17 > HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 17 (level, > high) -> IRQ 17 > HDA Intel 0000:00:10.1: setting latency timer to 64 > usbcore: registered new interface driver snd-usb-audio > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > Clocksource tsc unstable (delta = 4398045828766 ns) > device-mapper: multipath: version 1.0.5 loaded > EXT3 FS on dm-0, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 1933304k swap on /dev/mapper/VolGroup00-LogVol01. > Priority:-1 extents:1 across:1933304k > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > warning: `dbus-daemon' uses deprecated v2 capabilities in a way that > may be insecure. > fuse init (API version 7.9) > Loading iSCSI transport class v2.0-870. > iscsi: registered transport (tcp) > iscsi: registered transport (iser) > Bluetooth: Core ver 2.13 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP ver 2.11 > Bluetooth: L2CAP socket layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.10 > Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > Bluetooth: BNEP filters: protocol multicast > Bridge firewalling registered > pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. > Not cloning cgroup for unused subsystem ns > virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. > virbr0: starting userspace STP failed, starting kernel STP > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (7680 buckets, 30720 max) > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use > nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module > option or > sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > eth0: no link during initialization. > ADDRCONF(NETDEV_UP): eth0: link is not ready > ADDRCONF(NETDEV_UP): wlan0: link is not ready > virbr0: no IPv6 routers present > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 0 1 > domain 1: span 0-1 level CPU > groups: 0-1 > domain 2: span 0-1 level NODE > groups: 0-1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 1 0 > domain 1: span 0-1 level CPU > groups: 0-1 > domain 2: span 0-1 level NODE > groups: 0-1 > CPU0 attaching NULL sched-domain. > CPU1 attaching NULL sched-domain. > CPU0 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 0 1 > domain 1: span 0-1 level CPU > groups: 0-1 > domain 2: span 0-1 level NODE > groups: 0-1 > CPU1 attaching sched-domain: > domain 0: span 0-1 level MC > groups: 1 0 > domain 1: span 0-1 level CPU > groups: 0-1 > domain 2: span 0-1 level NODE > groups: 0-1 > ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > wlan0: no IPv6 routers present > > _______________________________________________ > Fedora-laptop-list mailing list > Fedora-laptop-list@xxxxxxxxxx > <mailto:Fedora-laptop-list@xxxxxxxxxx> > http://www.redhat.com/mailman/listinfo/fedora-laptop-list > > > > -- > Regards, > Miguel Ángel Pérez > > > ------------------------------------------------------------------------ > > _______________________________________________ > Fedora-laptop-list mailing list > Fedora-laptop-list@xxxxxxxxxx > http://www.redhat.com/mailman/listinfo/fedora-laptop-list _______________________________________________ Fedora-laptop-list mailing list Fedora-laptop-list@xxxxxxxxxx http://www.redhat.com/mailman/listinfo/fedora-laptop-list
