From: Hans de Goede <hdegoede@xxxxxxxxxx> media: ov08x40: Get reset GPIO and regulators on ACPI platforms too upstream status: Accepted in media subsystem co-maintainer tree: https://git.linuxtv.org/sailus/media_tree.git/log/drivers/media/i2c/ov08x40.c?h=devel (this tree gets rebased before merging so no git hash) ACPI platforms might also have a reset GPIO and regulators, move the code to get these outside of the if (!is_acpi_node(fwnode)) check. This also removes the is_acpi_node(fwnode) checks from ov08x40_power_on() / ov08x40_power_off() both the GPIO hand the clk frameworks functions used there will happily accept the NULL pointer returned from the optional get() functions when there is no reset GPIO / no clk. While moving the code around also at error logging to the error exit path for getting the reset GPIO. Tested-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> diff --git a/drivers/media/i2c/ov08x40.c b/drivers/media/i2c/ov08x40.c index blahblah..blahblah 100644 --- a/drivers/media/i2c/ov08x40.c +++ b/drivers/media/i2c/ov08x40.c @@ -1322,9 +1322,6 @@ static int ov08x40_power_on(struct device *dev) struct ov08x40 *ov08x = to_ov08x40(sd); int ret; - if (is_acpi_node(dev_fwnode(dev))) - return 0; - ret = clk_prepare_enable(ov08x->xvclk); if (ret < 0) { dev_err(dev, "failed to enable xvclk\n"); @@ -1360,9 +1357,6 @@ static int ov08x40_power_off(struct device *dev) struct v4l2_subdev *sd = dev_get_drvdata(dev); struct ov08x40 *ov08x = to_ov08x40(sd); - if (is_acpi_node(dev_fwnode(dev))) - return 0; - gpiod_set_value_cansleep(ov08x->reset_gpio, 1); regulator_bulk_disable(ARRAY_SIZE(ov08x40_supply_names), ov08x->supplies); @@ -2165,6 +2159,22 @@ static int ov08x40_check_hwcfg(struct ov08x40 *ov08x, struct device *dev) if (ret) return ret; + ov08x->reset_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(ov08x->reset_gpio)) { + ret = dev_err_probe(dev, PTR_ERR(ov08x->reset_gpio), + "getting reset GPIO\n"); + goto out_err; + } + + for (i = 0; i < ARRAY_SIZE(ov08x40_supply_names); i++) + ov08x->supplies[i].supply = ov08x40_supply_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ov08x40_supply_names), + ov08x->supplies); + if (ret) + goto out_err; + if (!is_acpi_node(fwnode)) { ov08x->xvclk = devm_clk_get(dev, NULL); if (IS_ERR(ov08x->xvclk)) { @@ -2175,22 +2185,6 @@ static int ov08x40_check_hwcfg(struct ov08x40 *ov08x, struct device *dev) } xvclk_rate = clk_get_rate(ov08x->xvclk); - - ov08x->reset_gpio = devm_gpiod_get_optional(dev, "reset", - GPIOD_OUT_LOW); - if (IS_ERR(ov08x->reset_gpio)) { - ret = PTR_ERR(ov08x->reset_gpio); - goto out_err; - } - - for (i = 0; i < ARRAY_SIZE(ov08x40_supply_names); i++) - ov08x->supplies[i].supply = ov08x40_supply_names[i]; - - ret = devm_regulator_bulk_get(dev, - ARRAY_SIZE(ov08x40_supply_names), - ov08x->supplies); - if (ret) - goto out_err; } else { ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency", &xvclk_rate); -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/3671 -- _______________________________________________ kernel mailing list -- kernel@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to kernel-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/kernel@xxxxxxxxxxxxxxxxxxxxxxx Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
