From: Hans de Goede <hdegoede@xxxxxxxxxx> media: ov08x40: Move fwnode_graph_get_next_endpoint() call up upstream status: Accepted in media subsystem co-maintainer tree: https://git.linuxtv.org/sailus/media_tree.git/log/drivers/media/i2c/ov08x40.c?h=devel (this tree gets rebased before merging so no git hash) If the bridge has not yet setup the fwnode-graph then the fwnode_property_read_u32("clock-frequency") call will fail. Make the fwnode_graph_get_next_endpoint() call the first call in ov08x40_check_hwcfg() and return -EPROBE_DEFER if it fails. Tested-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> diff --git a/drivers/media/i2c/ov08x40.c b/drivers/media/i2c/ov08x40.c index blahblah..blahblah 100644 --- a/drivers/media/i2c/ov08x40.c +++ b/drivers/media/i2c/ov08x40.c @@ -2151,23 +2151,37 @@ static int ov08x40_check_hwcfg(struct ov08x40 *ov08x, struct device *dev) int ret; u32 xvclk_rate; - if (!fwnode) - return -ENXIO; + /* + * Sometimes the fwnode graph is initialized by the bridge driver. + * Bridge drivers doing this also add sensor properties, wait for this. + */ + ep = fwnode_graph_get_next_endpoint(fwnode, NULL); + if (!ep) + return dev_err_probe(dev, -EPROBE_DEFER, + "waiting for fwnode graph endpoint\n"); + + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); + fwnode_handle_put(ep); + if (ret) + return ret; if (!is_acpi_node(fwnode)) { ov08x->xvclk = devm_clk_get(dev, NULL); if (IS_ERR(ov08x->xvclk)) { dev_err(dev, "could not get xvclk clock (%pe)\n", ov08x->xvclk); - return PTR_ERR(ov08x->xvclk); + ret = PTR_ERR(ov08x->xvclk); + goto out_err; } xvclk_rate = clk_get_rate(ov08x->xvclk); ov08x->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(ov08x->reset_gpio)) - return PTR_ERR(ov08x->reset_gpio); + if (IS_ERR(ov08x->reset_gpio)) { + ret = PTR_ERR(ov08x->reset_gpio); + goto out_err; + } for (i = 0; i < ARRAY_SIZE(ov08x40_supply_names); i++) ov08x->supplies[i].supply = ov08x40_supply_names[i]; @@ -2176,31 +2190,23 @@ static int ov08x40_check_hwcfg(struct ov08x40 *ov08x, struct device *dev) ARRAY_SIZE(ov08x40_supply_names), ov08x->supplies); if (ret) - return ret; + goto out_err; } else { ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency", &xvclk_rate); if (ret) { dev_err(dev, "can't get clock frequency"); - return ret; + goto out_err; } } if (xvclk_rate != OV08X40_XVCLK) { dev_err(dev, "external clock %d is not supported", xvclk_rate); - return -EINVAL; + ret = -EINVAL; + goto out_err; } - ep = fwnode_graph_get_next_endpoint(fwnode, NULL); - if (!ep) - return -ENXIO; - - ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); - fwnode_handle_put(ep); - if (ret) - return ret; - if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV08X40_DATA_LANES) { dev_err(dev, "number of CSI2 data lanes %d is not supported", bus_cfg.bus.mipi_csi2.num_data_lanes); -- https://gitlab.com/cki-project/kernel-ark/-/merge_requests/3671 -- _______________________________________________ kernel mailing list -- kernel@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to kernel-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/kernel@xxxxxxxxxxxxxxxxxxxxxxx Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
