From: Prarit Bhargava <prarit@xxxxxxxxxx>
redhat/self-test: Update data set
The previous commit changes the specfile output to only look at the
information affected by the Makefile variables. Update the dataset.
Signed-off-by: Prarit Bhargava <prarit@xxxxxxxxxx>
diff --git a/redhat/self-test/data/centos-2585cf9dfaad.el7.spec b/redhat/self-test/data/centos-2585cf9dfaad.el7.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/centos-2585cf9dfaad.el7.spec
+++ b/redhat/self-test/data/centos-2585cf9dfaad.el7.spec
@@ -1,3050 +1,13 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
-%define debugbuildsenabled 1
%define buildid .test
%define specversion 5.16.0
%define patchversion 5.16
%define pkgrelease 0.rc5.6.test
%define kversion 5
%define tarfile_release 5.16.0-0.rc5.6.test
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc5.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-0.rc5.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/centos-2585cf9dfaad.fc25.spec b/redhat/self-test/data/centos-2585cf9dfaad.fc25.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/centos-2585cf9dfaad.fc25.spec
+++ b/redhat/self-test/data/centos-2585cf9dfaad.fc25.spec
@@ -1,3050 +1,13 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
-%define debugbuildsenabled 1
%define buildid .test
%define specversion 5.16.0
%define patchversion 5.16
%define pkgrelease 0.rc5.6.test
%define kversion 5
%define tarfile_release 5.16.0-0.rc5.6.test
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc5.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-0.rc5.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/centos-78e36f3b0dae.el7.spec b/redhat/self-test/data/centos-78e36f3b0dae.el7.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/centos-78e36f3b0dae.el7.spec
+++ b/redhat/self-test/data/centos-78e36f3b0dae.el7.spec
@@ -1,125 +1,7 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
%define debugbuildsenabled 0
%define buildid .test
%define specversion 5.17.0
@@ -127,2924 +9,6 @@ Summary: The Linux kernel
%define pkgrelease 0.rc0.78e36f3b0dae.6.test
%define kversion 5
%define tarfile_release 5.17.0-0.rc0.78e36f3b0dae.6.test
-# This is needed to do merge window version magic
%define patchlevel 17
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc0.78e36f3b0dae.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.17.0-0.rc0.78e36f3b0dae.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/centos-78e36f3b0dae.fc25.spec b/redhat/self-test/data/centos-78e36f3b0dae.fc25.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/centos-78e36f3b0dae.fc25.spec
+++ b/redhat/self-test/data/centos-78e36f3b0dae.fc25.spec
@@ -1,125 +1,7 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
%define debugbuildsenabled 0
%define buildid .test
%define specversion 5.17.0
@@ -127,2924 +9,6 @@ Summary: The Linux kernel
%define pkgrelease 0.rc0.78e36f3b0dae.6.test
%define kversion 5
%define tarfile_release 5.17.0-0.rc0.78e36f3b0dae.6.test
-# This is needed to do merge window version magic
%define patchlevel 17
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc0.78e36f3b0dae.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.17.0-0.rc0.78e36f3b0dae.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/centos-df0cc57e057f.el7.spec b/redhat/self-test/data/centos-df0cc57e057f.el7.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/centos-df0cc57e057f.el7.spec
+++ b/redhat/self-test/data/centos-df0cc57e057f.el7.spec
@@ -1,3050 +1,13 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
-%define debugbuildsenabled 1
%define buildid .test
%define specversion 5.16.0
%define patchversion 5.16
%define pkgrelease 6.test
%define kversion 5
%define tarfile_release 5.16.0-6.test
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/centos-df0cc57e057f.fc25.spec b/redhat/self-test/data/centos-df0cc57e057f.fc25.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/centos-df0cc57e057f.fc25.spec
+++ b/redhat/self-test/data/centos-df0cc57e057f.fc25.spec
@@ -1,3050 +1,13 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
-%define debugbuildsenabled 1
%define buildid .test
%define specversion 5.16.0
%define patchversion 5.16
%define pkgrelease 6.test
%define kversion 5
%define tarfile_release 5.16.0-6.test
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/centos-fce15c45d3fb.el7.spec b/redhat/self-test/data/centos-fce15c45d3fb.el7.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/centos-fce15c45d3fb.el7.spec
+++ b/redhat/self-test/data/centos-fce15c45d3fb.el7.spec
@@ -1,125 +1,7 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
%define debugbuildsenabled 0
%define buildid .test
%define specversion 5.16.0
@@ -127,2924 +9,6 @@ Summary: The Linux kernel
%define pkgrelease 0.rc5.fce15c45d3fb.6.test
%define kversion 5
%define tarfile_release 5.16.0-0.rc5.fce15c45d3fb.6.test
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc5.fce15c45d3fb.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-0.rc5.fce15c45d3fb.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/centos-fce15c45d3fb.fc25.spec b/redhat/self-test/data/centos-fce15c45d3fb.fc25.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/centos-fce15c45d3fb.fc25.spec
+++ b/redhat/self-test/data/centos-fce15c45d3fb.fc25.spec
@@ -1,125 +1,7 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
%define debugbuildsenabled 0
%define buildid .test
%define specversion 5.16.0
@@ -127,2924 +9,6 @@ Summary: The Linux kernel
%define pkgrelease 0.rc5.fce15c45d3fb.6.test
%define kversion 5
%define tarfile_release 5.16.0-0.rc5.fce15c45d3fb.6.test
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc5.fce15c45d3fb.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-0.rc5.fce15c45d3fb.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/fedora-2585cf9dfaad.el7.spec b/redhat/self-test/data/fedora-2585cf9dfaad.el7.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/fedora-2585cf9dfaad.el7.spec
+++ b/redhat/self-test/data/fedora-2585cf9dfaad.el7.spec
@@ -1,3050 +1,13 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
-%define debugbuildsenabled 1
%define buildid .test
%define specversion 5.16.0
%define patchversion 5.16
%define pkgrelease 0.rc5.6.test
%define kversion 5
%define tarfile_release 5.16-rc5
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc5.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-0.rc5.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/fedora-2585cf9dfaad.fc25.spec b/redhat/self-test/data/fedora-2585cf9dfaad.fc25.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/fedora-2585cf9dfaad.fc25.spec
+++ b/redhat/self-test/data/fedora-2585cf9dfaad.fc25.spec
@@ -1,3050 +1,13 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
-%define debugbuildsenabled 1
%define buildid .test
%define specversion 5.16.0
%define patchversion 5.16
%define pkgrelease 0.rc5.6.test
%define kversion 5
%define tarfile_release 5.16-rc5
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc5.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-0.rc5.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/fedora-78e36f3b0dae.el7.spec b/redhat/self-test/data/fedora-78e36f3b0dae.el7.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/fedora-78e36f3b0dae.el7.spec
+++ b/redhat/self-test/data/fedora-78e36f3b0dae.el7.spec
@@ -1,125 +1,7 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
%define debugbuildsenabled 0
%define buildid .test
%define specversion 5.17.0
@@ -127,2924 +9,6 @@ Summary: The Linux kernel
%define pkgrelease 0.rc0.78e36f3b0dae.6.test
%define kversion 5
%define tarfile_release 5.16-11523-g78e36f3b0dae
-# This is needed to do merge window version magic
%define patchlevel 17
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc0.78e36f3b0dae.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.17.0-0.rc0.78e36f3b0dae.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/fedora-78e36f3b0dae.fc25.spec b/redhat/self-test/data/fedora-78e36f3b0dae.fc25.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/fedora-78e36f3b0dae.fc25.spec
+++ b/redhat/self-test/data/fedora-78e36f3b0dae.fc25.spec
@@ -1,125 +1,7 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
%define debugbuildsenabled 0
%define buildid .test
%define specversion 5.17.0
@@ -127,2924 +9,6 @@ Summary: The Linux kernel
%define pkgrelease 0.rc0.78e36f3b0dae.6.test
%define kversion 5
%define tarfile_release 5.16-11523-g78e36f3b0dae
-# This is needed to do merge window version magic
%define patchlevel 17
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc0.78e36f3b0dae.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.17.0-0.rc0.78e36f3b0dae.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/fedora-df0cc57e057f.el7.spec b/redhat/self-test/data/fedora-df0cc57e057f.el7.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/fedora-df0cc57e057f.el7.spec
+++ b/redhat/self-test/data/fedora-df0cc57e057f.el7.spec
@@ -1,3050 +1,13 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
-%define debugbuildsenabled 1
%define buildid .test
%define specversion 5.16.0
%define patchversion 5.16
%define pkgrelease 6.test
%define kversion 5
%define tarfile_release 5.16
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/fedora-df0cc57e057f.fc25.spec b/redhat/self-test/data/fedora-df0cc57e057f.fc25.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/fedora-df0cc57e057f.fc25.spec
+++ b/redhat/self-test/data/fedora-df0cc57e057f.fc25.spec
@@ -1,3050 +1,13 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
-%define debugbuildsenabled 1
%define buildid .test
%define specversion 5.16.0
%define patchversion 5.16
%define pkgrelease 6.test
%define kversion 5
%define tarfile_release 5.16
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/fedora-fce15c45d3fb.el7.spec b/redhat/self-test/data/fedora-fce15c45d3fb.el7.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/fedora-fce15c45d3fb.el7.spec
+++ b/redhat/self-test/data/fedora-fce15c45d3fb.el7.spec
@@ -1,125 +1,7 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
%define debugbuildsenabled 0
%define buildid .test
%define specversion 5.16.0
@@ -127,2924 +9,6 @@ Summary: The Linux kernel
%define pkgrelease 0.rc5.fce15c45d3fb.6.test
%define kversion 5
%define tarfile_release 5.16-rc5-1-gfce15c45d3fb
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc5.fce15c45d3fb.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-0.rc5.fce15c45d3fb.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/fedora-fce15c45d3fb.fc25.spec b/redhat/self-test/data/fedora-fce15c45d3fb.fc25.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/fedora-fce15c45d3fb.fc25.spec
+++ b/redhat/self-test/data/fedora-fce15c45d3fb.fc25.spec
@@ -1,125 +1,7 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
%define debugbuildsenabled 0
%define buildid .test
%define specversion 5.16.0
@@ -127,2924 +9,6 @@ Summary: The Linux kernel
%define pkgrelease 0.rc5.fce15c45d3fb.6.test
%define kversion 5
%define tarfile_release 5.16-rc5-1-gfce15c45d3fb
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc5.fce15c45d3fb.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-0.rc5.fce15c45d3fb.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/rhel-2585cf9dfaad.el7.spec b/redhat/self-test/data/rhel-2585cf9dfaad.el7.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/rhel-2585cf9dfaad.el7.spec
+++ b/redhat/self-test/data/rhel-2585cf9dfaad.el7.spec
@@ -1,3050 +1,13 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
-%define debugbuildsenabled 1
%define buildid .test
%define specversion 5.16.0
%define patchversion 5.16
%define pkgrelease 0.rc5.6.test
%define kversion 5
%define tarfile_release 5.16.0-0.rc5.6.test
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc5.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-0.rc5.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/rhel-2585cf9dfaad.fc25.spec b/redhat/self-test/data/rhel-2585cf9dfaad.fc25.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/rhel-2585cf9dfaad.fc25.spec
+++ b/redhat/self-test/data/rhel-2585cf9dfaad.fc25.spec
@@ -1,3050 +1,13 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
-%define debugbuildsenabled 1
%define buildid .test
%define specversion 5.16.0
%define patchversion 5.16
%define pkgrelease 0.rc5.6.test
%define kversion 5
%define tarfile_release 5.16.0-0.rc5.6.test
-# This is needed to do merge window version magic
%define patchlevel 16
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc5.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.16.0-0.rc5.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/rhel-78e36f3b0dae.el7.spec b/redhat/self-test/data/rhel-78e36f3b0dae.el7.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/rhel-78e36f3b0dae.el7.spec
+++ b/redhat/self-test/data/rhel-78e36f3b0dae.el7.spec
@@ -1,125 +1,7 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
%define debugbuildsenabled 0
%define buildid .test
%define specversion 5.17.0
@@ -127,2924 +9,6 @@ Summary: The Linux kernel
%define pkgrelease 0.rc0.78e36f3b0dae.6.test
%define kversion 5
%define tarfile_release 5.17.0-0.rc0.78e36f3b0dae.6.test
-# This is needed to do merge window version magic
%define patchlevel 17
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc0.78e36f3b0dae.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.17.0-0.rc0.78e36f3b0dae.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
diff --git a/redhat/self-test/data/rhel-78e36f3b0dae.fc25.spec b/redhat/self-test/data/rhel-78e36f3b0dae.fc25.spec
index blahblah..blahblah 100755
--- a/redhat/self-test/data/rhel-78e36f3b0dae.fc25.spec
+++ b/redhat/self-test/data/rhel-78e36f3b0dae.fc25.spec
@@ -1,125 +1,7 @@
-# All Global changes to build and install go here.
-# Per the below section about __spec_install_pre, any rpm
-# environment changes that affect %%install need to go
-# here before the %%install macro is pre-built.
-
-# Disable LTO in userspace packages.
-%global _lto_cflags %{nil}
-
-# Option to enable compiling with clang instead of gcc.
-%bcond_with toolchain_clang
-
-%if %{with toolchain_clang}
-%global toolchain clang
-%endif
-
-# Compile the kernel with LTO (only supported when building with clang).
-%bcond_with clang_lto
-
-%if %{with clang_lto} && %{without toolchain_clang}
-{error:clang_lto requires --with toolchain_clang}
-%endif
-
-# Cross compile on copr for arm
-# See https://bugzilla.redhat.com/1879599
-%if 0%{?_with_cross_arm:1}
-%global _target_cpu armv7hl
-%global _arch arm
-%global _build_arch arm
-%global _with_cross 1
-%endif
-
-# The kernel's %%install section is special
-# Normally the %%install section starts by cleaning up the BUILD_ROOT
-# like so:
-#
-# %%__spec_install_pre %%{___build_pre}\
-# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
-# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
-# mkdir "$RPM_BUILD_ROOT"\
-# %%{nil}
-#
-# But because of kernel variants, the %%build section, specifically
-# BuildKernel(), moves each variant to its final destination as the
-# variant is built. This violates the expectation of the %%install
-# section. As a result we snapshot the current env variables and
-# purposely leave out the removal section. All global wide changes
-# should be added above this line otherwise the %%install section
-# will not see them.
-%global __spec_install_pre %{___build_pre}
-
-# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
-# compression for rpms (xz, level 2).
-# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
-# to compress by single-threaded xz. Switch to threaded compression,
-# and from level 2 to 3 to keep compressed sizes close to "w2" results.
-#
-# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
-# this one might need tweaking (e.g. if default changes to w3.xzdio,
-# change below to w4T.xzdio):
-#
-# This is disabled on i686 as it triggers oom errors
-
-%ifnarch i686
-%define _binary_payload w3T.xzdio
-%endif
-
-Summary: The Linux kernel
-%if 0%{?fedora}
-%define secure_boot_arch x86_64
-%else
-%define secure_boot_arch x86_64 aarch64 s390x ppc64le
-%endif
-
-# Signing for secure boot authentication
-%ifarch %{secure_boot_arch}
-%global signkernel 1
-%else
-%global signkernel 0
-%endif
-
-# Sign modules on all arches
-%global signmodules 1
-
-# Compress modules only for architectures that build modules
-%ifarch noarch
-%global zipmodules 0
-%else
-%global zipmodules 1
-%endif
-
-%if %{zipmodules}
-%global zipsed -e 's/\.ko$/\.ko.xz/'
-# for parallel xz processes, replace with 1 to go back to single process
-%endif
-
-%if 0%{?fedora}
-%define primary_target fedora
-%else
-%define primary_target rhel
-%endif
-
-#
-# genspec.sh variables
-#
-
-# Include Fedora files
%global include_fedora 1
-# Include RHEL files
%global include_rhel 1
-# Provide Patchlist.changelog file
%global patchlist_changelog 1
-# Set released_kernel to 1 when the upstream source tarball contains a
-# kernel release. (This includes prepatch or "rc" releases.)
-# Set released_kernel to 0 when the upstream source tarball contains an
-# unreleased kernel development snapshot.
%global released_kernel 0
-# Set debugbuildsenabled to 1 to build separate base and debug kernels
-# (on supported architectures). The kernel-debug-* subpackages will
-# contain the debug kernel.
-# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
-# to build the base kernel using the debug configuration. (Specifying
-# the --with-release option overrides this setting.)
%define debugbuildsenabled 0
%define buildid .test
%define specversion 5.17.0
@@ -127,2924 +9,6 @@ Summary: The Linux kernel
%define pkgrelease 0.rc0.78e36f3b0dae.6.test
%define kversion 5
%define tarfile_release 5.17.0-0.rc0.78e36f3b0dae.6.test
-# This is needed to do merge window version magic
%define patchlevel 17
-# allow pkg_release to have configurable %%{?dist} tag
%define specrelease 0.rc0.78e36f3b0dae.6%{?buildid}%{?dist}
-
-#
-# End of genspec.sh variables
-#
-
-%define pkg_release %{specrelease}
-
-# libexec dir is not used by the linker, so the shared object there
-# should not be exported to RPM provides
-%global __provides_exclude_from ^%{_libexecdir}/kselftests
-
-# The following build options are enabled by default, but may become disabled
-# by later architecture-specific checks. These can also be disabled by using
-# --without <opt> in the rpmbuild command, or by forcing these values to 0.
-#
-# standard kernel
-%define with_up %{?_without_up: 0} %{?!_without_up: 1}
-# kernel PAE (only valid for ARM (lpae))
-%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
-# kernel-debug
-%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
-# kernel-zfcpdump (s390 specific kernel for zfcpdump)
-%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
-# kernel-doc
-%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
-# kernel-headers
-%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
-%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
-# perf
-%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
-# tools
-%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
-# bpf tool
-%define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1}
-# kernel-debuginfo
-%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
-# kernel-abi-stablelists
-%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
-# internal samples and selftests
-%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
-#
-# Additional options for user-friendly one-off kernel building:
-#
-# Only build the base kernel (--with baseonly):
-%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
-# Only build the pae kernel (--with paeonly):
-%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
-# Only build the debug kernel (--with dbgonly):
-%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
-# Control whether we perform a compat. check against published ABI.
-%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
-# Temporarily disable kabi checks until RC.
-%define with_kabichk 0
-# Control whether we perform a compat. check against DUP ABI.
-%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
-#
-# Control whether to run an extensive DWARF based kABI check.
-# Note that this option needs to have baseline setup in SOURCE300.
-%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
-%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
-#
-# Control whether to install the vdso directories.
-%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
-#
-# should we do C=1 builds with sparse
-%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
-#
-# Cross compile requested?
-%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
-#
-# build a release kernel on rawhide
-%define with_release %{?_with_release: 1} %{?!_with_release: 0}
-
-# verbose build, i.e. no silent rules and V=1
-%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
-
-#
-# check for mismatched config options
-%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
-
-#
-# gcov support
-%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
-
-#
-# ipa_clone support
-%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}
-
-# Want to build a vanilla kernel build without any non-upstream patches?
-%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
-
-%if 0%{?fedora}
-# Kernel headers are being split out into a separate package
-%define with_headers 0
-%define with_cross_headers 0
-# no ipa_clone for now
-%define with_ipaclones 0
-# no stablelist
-%define with_kernel_abi_stablelists 0
-# Fedora builds these separately
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-# selftests turns on bpftool
-%define with_selftests 0
-%endif
-
-%if %{with_verbose}
-%define make_opts V=1
-%else
-%define make_opts -s
-%endif
-
-%if %{with toolchain_clang}
-%ifarch s390x ppc64le
-%global llvm_ias 0
-%else
-%global llvm_ias 1
-%endif
-%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
-%if %{with clang_lto}
-%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
-%endif
-%global make_opts %{make_opts} %{clang_make_opts}
-# clang does not support the -fdump-ipa-clones option
-%global with_ipaclones 0
-%endif
-
-# turn off debug kernel and kabichk for gcov builds
-%if %{with_gcov}
-%define with_debug 0
-%define with_kabichk 0
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%define with_kabidw_base 0
-%define with_kernel_abi_stablelists 0
-%endif
-
-# turn off kABI DWARF-based check if we're generating the base dataset
-%if %{with_kabidw_base}
-%define with_kabidwchk 0
-%endif
-
-# kpatch_kcflags are extra compiler flags applied to base kernel
-# -fdump-ipa-clones is enabled only for base kernels on selected arches
-%if %{with_ipaclones}
-%ifarch x86_64 ppc64le
-%define kpatch_kcflags -fdump-ipa-clones
-%else
-%define with_ipaclones 0
-%endif
-%endif
-
-%define make_target bzImage
-%define image_install_path boot
-
-%define KVERREL %{version}-%{release}.%{_target_cpu}
-%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
-%define hdrarch %_target_cpu
-%define asmarch %_target_cpu
-
-%if 0%{!?nopatches:1}
-%define nopatches 0
-%endif
-
-%if %{with_vanilla}
-%define nopatches 1
-%endif
-
-%if %{with_release}
-%define debugbuildsenabled 1
-%endif
-
-%if !%{with_debuginfo}
-%define _enable_debug_packages 0
-%endif
-%define debuginfodir /usr/lib/debug
-# Needed because we override almost everything involving build-ids
-# and debuginfo generation. Currently we rely on the old alldebug setting.
-%global _build_id_links alldebug
-
-# kernel PAE is only built on ARMv7
-%ifnarch armv7hl
-%define with_pae 0
-%endif
-
-# if requested, only build base kernel
-%if %{with_baseonly}
-%define with_pae 0
-%define with_debug 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# if requested, only build pae kernel
-%if %{with_paeonly}
-%define with_up 0
-%define with_debug 0
-%endif
-
-# if requested, only build debug kernel
-%if %{with_dbgonly}
-%define with_up 0
-%define with_vdso_install 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_kernel_abi_stablelists 0
-%define with_selftests 0
-%define with_cross 0
-%define with_cross_headers 0
-%define with_ipaclones 0
-%endif
-
-# turn off kABI DUP check and DWARF-based check if kABI check is disabled
-%if !%{with_kabichk}
-%define with_kabidupchk 0
-%define with_kabidwchk 0
-%endif
-
-%if %{with_vdso_install}
-%define use_vdso 1
-%endif
-
-# selftests require bpftool to be built
-%if %{with_selftests}
-%define with_bpftool 1
-%endif
-
-%ifnarch noarch
-%define with_kernel_abi_stablelists 0
-%endif
-
-# Overrides for generic default options
-
-# only package docs noarch
-%ifnarch noarch
-%define with_doc 0
-%define doc_build_fail true
-%endif
-
-%if 0%{?fedora}
-# don't do debug builds on anything but i686 and x86_64
-%ifnarch i686 x86_64
-%define with_debug 0
-%endif
-%endif
-
-# don't build noarch kernels or headers (duh)
-%ifarch noarch
-%define with_up 0
-%define with_headers 0
-%define with_cross_headers 0
-%define with_tools 0
-%define with_perf 0
-%define with_bpftool 0
-%define with_selftests 0
-%define with_debug 0
-%define all_arch_configs kernel-%{version}-*.config
-%endif
-
-# sparse blows up on ppc
-%ifnarch ppc64le
-%define with_sparse 0
-%endif
-
-# zfcpdump mechanism is s390 only
-%ifnarch s390x
-%define with_zfcpdump 0
-%endif
-
-%if 0%{?fedora}
-# This is not for Fedora
-%define with_zfcpdump 0
-%endif
-
-# Per-arch tweaks
-
-%ifarch i686
-%define asmarch x86
-%define hdrarch i386
-%define all_arch_configs kernel-%{version}-i?86*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch x86_64
-%define asmarch x86
-%define all_arch_configs kernel-%{version}-x86_64*.config
-%define kernel_image arch/x86/boot/bzImage
-%endif
-
-%ifarch ppc64le
-%define asmarch powerpc
-%define hdrarch powerpc
-%define make_target vmlinux
-%define kernel_image vmlinux
-%define kernel_image_elf 1
-%define use_vdso 0
-%define all_arch_configs kernel-%{version}-ppc64le*.config
-%endif
-
-%ifarch s390x
-%define asmarch s390
-%define hdrarch s390
-%define all_arch_configs kernel-%{version}-s390x.config
-%define kernel_image arch/s390/boot/bzImage
-%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
-%endif
-
-%ifarch %{arm}
-%define all_arch_configs kernel-%{version}-arm*.config
-%define skip_nonpae_vdso 1
-%define asmarch arm
-%define hdrarch arm
-%define make_target bzImage
-%define kernel_image arch/arm/boot/zImage
-# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
-%define kernel_mflags KALLSYMS_EXTRA_PASS=1
-# we only build headers/perf/tools on the base arm arches
-# just like we used to only build them on i386 for x86
-%ifnarch armv7hl
-%define with_headers 0
-%define with_cross_headers 0
-%endif
-# These currently don't compile on armv7
-%define with_selftests 0
-%endif
-
-%ifarch aarch64
-%define all_arch_configs kernel-%{version}-aarch64*.config
-%define asmarch arm64
-%define hdrarch arm64
-%define make_target Image.gz
-%define kernel_image arch/arm64/boot/Image.gz
-%endif
-
-# Should make listnewconfig fail if there's config options
-# printed out?
-%if %{nopatches}
-%define with_configchecks 0
-%endif
-
-# To temporarily exclude an architecture from being built, add it to
-# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
-# don't build kernel-headers then the new build system will no longer let
-# us use the previous build of that package -- it'll just be completely AWOL.
-# Which is a BadThing(tm).
-
-# We only build kernel-headers on the following...
-%if 0%{?fedora}
-%define nobuildarches i386
-%else
-%define nobuildarches i386 i686 %{arm}
-%endif
-
-%ifarch %nobuildarches
-# disable BuildKernel commands
-%define with_up 0
-%define with_debug 0
-%define with_pae 0
-%define with_zfcpdump 0
-
-%define with_debuginfo 0
-%define with_perf 0
-%define with_tools 0
-%define with_bpftool 0
-%define with_selftests 0
-%define _enable_debug_packages 0
-%endif
-
-# Architectures we build tools/cpupower on
-%if 0%{?fedora}
-%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
-%else
-%define cpupowerarchs i686 x86_64 ppc64le aarch64
-%endif
-
-%if 0%{?use_vdso}
-
-%if 0%{?skip_nonpae_vdso}
-%define _use_vdso 0
-%else
-%define _use_vdso 1
-%endif
-
-%else
-%define _use_vdso 0
-%endif
-
-# If build of debug packages is disabled, we need to know if we want to create
-# meta debug packages or not, after we define with_debug for all specific cases
-# above. So this must be at the end here, after all cases of with_debug or not.
-%define with_debug_meta 0
-%if !%{debugbuildsenabled}
-%if %{with_debug}
-%define with_debug_meta 1
-%endif
-%define with_debug 0
-%endif
-
-
-#
-# Packages that need to be installed before the kernel is, because the %%post
-# scripts use them.
-#
-%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
-%define initrd_prereq dracut >= 027
-
-
-Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
-URL: https://www.kernel.org/
-Version: %{specversion}
-Release: %{pkg_release}
-# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
-# SET %%nobuildarches (ABOVE) INSTEAD
-%if 0%{?fedora}
-ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
-%else
-ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
-%endif
-ExclusiveOS: Linux
-%ifnarch %{nobuildarches}
-Requires: kernel-core-uname-r = %{KVERREL}
-Requires: kernel-modules-uname-r = %{KVERREL}
-%endif
-
-
-#
-# List the packages used during the kernel build
-#
-BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which
-BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
-BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
-BuildRequires: net-tools, hostname, bc, elfutils-devel
-BuildRequires: dwarves
-BuildRequires: python3-devel
-BuildRequires: gcc-plugin-devel
-# glibc-static is required for a consistent build environment (specifically
-# CONFIG_CC_CAN_LINK_STATIC=y).
-BuildRequires: glibc-static
-%ifnarch %{nobuildarches} noarch
-BuildRequires: bpftool
-%endif
-%if %{with_headers}
-BuildRequires: rsync
-%endif
-%if %{with_doc}
-BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme
-%endif
-%if %{with_sparse}
-BuildRequires: sparse
-%endif
-%if %{with_perf}
-BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
-BuildRequires: audit-libs-devel
-BuildRequires: java-devel
-BuildRequires: libbpf-devel
-BuildRequires: libbabeltrace-devel
-BuildRequires: libtraceevent-devel
-%ifnarch %{arm} s390x
-BuildRequires: numactl-devel
-%endif
-%ifarch aarch64
-BuildRequires: opencsd-devel >= 1.0.0
-%endif
-%endif
-%if %{with_tools}
-BuildRequires: gettext ncurses-devel
-BuildRequires: libcap-devel libcap-ng-devel
-%ifnarch s390x
-BuildRequires: pciutils-devel
-%endif
-%ifarch i686 x86_64
-BuildRequires: libnl3-devel
-%endif
-%endif
-%if %{with_tools} || %{signmodules} || %{signkernel}
-BuildRequires: openssl-devel
-%endif
-%if %{with_bpftool}
-BuildRequires: python3-docutils
-BuildRequires: zlib-devel binutils-devel
-%endif
-%if %{with_selftests}
-BuildRequires: clang llvm
-%ifnarch %{arm}
-BuildRequires: numactl-devel
-%endif
-BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
-%endif
-BuildConflicts: rhbuildsys(DiskFree) < 500Mb
-%if %{with_debuginfo}
-BuildRequires: rpm-build, elfutils
-BuildConflicts: rpm < 4.13.0.1-19
-BuildConflicts: dwarves < 1.13
-# Most of these should be enabled after more investigation
-%undefine _include_minidebuginfo
-%undefine _find_debuginfo_dwz_opts
-%undefine _unique_build_ids
-%undefine _unique_debug_names
-%undefine _unique_debug_srcs
-%undefine _debugsource_packages
-%undefine _debuginfo_subpackages
-%global _find_debuginfo_opts -r
-%global _missing_build_ids_terminate_build 1
-%global _no_recompute_build_ids 1
-%endif
-%if %{with_kabidwchk} || %{with_kabidw_base}
-BuildRequires: kabi-dw
-%endif
-
-%if %{signkernel}%{signmodules}
-BuildRequires: openssl
-%if %{signkernel}
-# ELN uses Fedora signing process, so exclude
-%if 0%{?rhel}%{?centos} && !0%{?eln}
-BuildRequires: system-sb-certs
-%endif
-%ifarch x86_64 aarch64
-BuildRequires: nss-tools
-BuildRequires: pesign >= 0.10-4
-%endif
-%endif
-%endif
-
-%if %{with_cross}
-BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
-%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
-%define __strip %{_build_arch}-linux-gnu-strip
-%endif
-
-# These below are required to build man pages
-%if %{with_perf}
-BuildRequires: xmlto
-%endif
-%if %{with_perf} || %{with_tools}
-BuildRequires: asciidoc
-%endif
-
-%if %{with toolchain_clang}
-BuildRequires: clang
-%endif
-
-%if %{with clang_lto}
-BuildRequires: llvm
-BuildRequires: lld
-%endif
-
-# Because this is the kernel, it's hard to get a single upstream URL
-# to represent the base without needing to do a bunch of patching. This
-# tarball is generated from a src-git tree. If you want to see the
-# exact git commit you can run
-#
-# xzcat -qq ${TARBALL} | git get-tar-commit-id
-Source0: linux-%{tarfile_release}.tar.xz
-
-Source1: Makefile.rhelver
-
-
-# Name of the packaged file containing signing key
-%ifarch ppc64le
-%define signing_key_filename kernel-signing-ppc.cer
-%endif
-%ifarch s390x
-%define signing_key_filename kernel-signing-s390.cer
-%endif
-
-%if %{?released_kernel}
-
-Source10: redhatsecurebootca5.cer
-Source11: redhatsecurebootca1.cer
-Source12: redhatsecureboot501.cer
-Source13: redhatsecureboot301.cer
-Source14: secureboot_s390.cer
-Source15: secureboot_ppc.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%ifarch x86_64 aarch64
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot501
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot301
-%endif
-%ifarch s390x
-%define secureboot_key_0 %{SOURCE14}
-%define pesign_name_0 redhatsecureboot302
-%endif
-%ifarch ppc64le
-%define secureboot_key_0 %{SOURCE15}
-%define pesign_name_0 redhatsecureboot303
-%endif
-
-# released_kernel
-%else
-
-Source10: redhatsecurebootca4.cer
-Source11: redhatsecurebootca2.cer
-Source12: redhatsecureboot401.cer
-Source13: redhatsecureboot003.cer
-
-%define secureboot_ca_1 %{SOURCE10}
-%define secureboot_ca_0 %{SOURCE11}
-%define secureboot_key_1 %{SOURCE12}
-%define pesign_name_1 redhatsecureboot401
-%define secureboot_key_0 %{SOURCE13}
-%define pesign_name_0 redhatsecureboot003
-
-# released_kernel
-%endif
-
-Source20: mod-denylist.sh
-Source21: mod-sign.sh
-Source22: parallel_xz.sh
-
-%define modsign_cmd %{SOURCE21}
-
-%if 0%{?include_rhel}
-Source23: x509.genkey.rhel
-
-Source24: kernel-aarch64-rhel.config
-Source25: kernel-aarch64-debug-rhel.config
-Source26: mod-extra.list.rhel
-
-Source27: kernel-ppc64le-rhel.config
-Source28: kernel-ppc64le-debug-rhel.config
-Source29: kernel-s390x-rhel.config
-Source30: kernel-s390x-debug-rhel.config
-Source31: kernel-s390x-zfcpdump-rhel.config
-Source32: kernel-x86_64-rhel.config
-Source33: kernel-x86_64-debug-rhel.config
-
-Source34: filter-x86_64.sh.rhel
-Source35: filter-armv7hl.sh.rhel
-Source37: filter-aarch64.sh.rhel
-Source38: filter-ppc64le.sh.rhel
-Source39: filter-s390x.sh.rhel
-Source40: filter-modules.sh.rhel
-
-Source41: x509.genkey.centos
-%endif
-
-%if 0%{?include_fedora}
-Source50: x509.genkey.fedora
-Source51: mod-extra.list.fedora
-
-Source52: kernel-aarch64-fedora.config
-Source53: kernel-aarch64-debug-fedora.config
-Source54: kernel-armv7hl-fedora.config
-Source55: kernel-armv7hl-debug-fedora.config
-Source56: kernel-armv7hl-lpae-fedora.config
-Source57: kernel-armv7hl-lpae-debug-fedora.config
-Source60: kernel-ppc64le-fedora.config
-Source61: kernel-ppc64le-debug-fedora.config
-Source62: kernel-s390x-fedora.config
-Source63: kernel-s390x-debug-fedora.config
-Source64: kernel-x86_64-fedora.config
-Source65: kernel-x86_64-debug-fedora.config
-
-Source67: filter-x86_64.sh.fedora
-Source68: filter-armv7hl.sh.fedora
-Source70: filter-aarch64.sh.fedora
-Source71: filter-ppc64le.sh.fedora
-Source72: filter-s390x.sh.fedora
-Source73: filter-modules.sh.fedora
-%endif
-
-Source75: partial-kgcov-snip.config
-Source80: generate_all_configs.sh
-Source81: process_configs.sh
-
-Source82: update_scripts.sh
-
-Source84: mod-internal.list
-
-Source100: rheldup3.x509
-Source101: rhelkpatch1.x509
-
-Source200: check-kabi
-
-Source201: Module.kabi_aarch64
-Source202: Module.kabi_ppc64le
-Source203: Module.kabi_s390x
-Source204: Module.kabi_x86_64
-
-Source210: Module.kabi_dup_aarch64
-Source211: Module.kabi_dup_ppc64le
-Source212: Module.kabi_dup_s390x
-Source213: Module.kabi_dup_x86_64
-
-Source300: kernel-abi-stablelists-%{specversion}-%{pkgrelease}.tar.bz2
-Source301: kernel-kabi-dw-%{specversion}-%{pkgrelease}.tar.bz2
-
-# Sources for kernel-tools
-Source2000: cpupower.service
-Source2001: cpupower.config
-Source2002: kvm_stat.logrotate
-
-# Some people enjoy building customized kernels from the dist-git in Fedora and
-# use this to override configuration options. One day they may all use the
-# source tree, but in the mean time we carry this to support the legacy workflow
-Source3000: merge.pl
-Source3001: kernel-local
-%if %{patchlist_changelog}
-Source3002: Patchlist.changelog
-%endif
-
-Source4000: README.rst
-Source4001: rpminspect.yaml
-Source4002: gating.yaml
-
-## Patches needed for building this package
-
-%if !%{nopatches}
-
-Patch1: patch-%{patchversion}-redhat.patch
-%endif
-
-# empty final patch to facilitate testing of kernel patches
-Patch999999: linux-kernel-test.patch
-
-# END OF PATCH DEFINITIONS
-
-%description
-The kernel meta package
-
-#
-# This macro does requires, provides, conflicts, obsoletes for a kernel package.
-# %%kernel_reqprovconf <subpackage>
-# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
-# macros defined above.
-#
-%define kernel_reqprovconf \
-Provides: kernel = %{specversion}-%{pkg_release}\
-Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{?1:+%{1}}\
-Provides: kernel-drm-nouveau = 16\
-Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires(pre): %{kernel_prereq}\
-Requires(pre): %{initrd_prereq}\
-Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
-Recommends: linux-firmware\
-Requires(preun): systemd >= 200\
-Conflicts: xfsprogs < 4.3.0-1\
-Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
-%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
-%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
-# We can't let RPM do the dependencies automatic because it'll then pick up\
-# a correct but undesirable perl dependency from the module headers which\
-# isn't required for the kernel proper to function\
-AutoReq: no\
-AutoProv: yes\
-%{nil}
-
-
-%package doc
-Summary: Various documentation bits found in the kernel source
-Group: Documentation
-%description doc
-This package contains documentation files from the kernel
-source. Various bits of information about the Linux kernel and the
-device drivers shipped with it are documented in these files.
-
-You'll want to install this package if you need a reference to the
-options that can be passed to Linux kernel modules at load time.
-
-
-%package headers
-Summary: Header files for the Linux kernel for use by glibc
-Obsoletes: glibc-kernheaders < 3.0-46
-Provides: glibc-kernheaders = 3.0-46
-%description headers
-Kernel-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-glibc package.
-
-%package cross-headers
-Summary: Header files for the Linux kernel for use by cross-glibc
-%description cross-headers
-Kernel-cross-headers includes the C header files that specify the interface
-between the Linux kernel and userspace libraries and programs. The
-header files define structures and constants that are needed for
-building most standard programs and are also needed for rebuilding the
-cross-glibc package.
-
-
-%package debuginfo-common-%{_target_cpu}
-Summary: Kernel source files used by %{name}-debuginfo packages
-Provides: installonlypkg(kernel)
-%description debuginfo-common-%{_target_cpu}
-This package is required by %{name}-debuginfo subpackages.
-It provides the kernel source files common to all builds.
-
-%if %{with_perf}
-%package -n perf
-Summary: Performance monitoring for the Linux kernel
-Requires: bzip2
-License: GPLv2
-%description -n perf
-This package contains the perf tool, which enables performance monitoring
-of the Linux kernel.
-
-%package -n perf-debuginfo
-Summary: Debug information for package perf
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n perf-debuginfo
-This package provides debug information for the perf package.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
-
-%package -n python3-perf
-Summary: Python bindings for apps which will manipulate perf events
-%description -n python3-perf
-The python3-perf package contains a module that permits applications
-written in the Python programming language to use the interface
-to manipulate perf events.
-
-%package -n python3-perf-debuginfo
-Summary: Debug information for package perf python bindings
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n python3-perf-debuginfo
-This package provides debug information for the perf python bindings.
-
-# the python_sitearch macro should already be defined from above
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
-
-# with_perf
-%endif
-
-%if %{with_tools}
-%package -n kernel-tools
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils = 1:009-0.6.p1
-Obsoletes: cpupowerutils < 1:009-0.6.p1
-Provides: cpufreq-utils = 1:009-0.6.p1
-Provides: cpufrequtils = 1:009-0.6.p1
-Obsoletes: cpufreq-utils < 1:009-0.6.p1
-Obsoletes: cpufrequtils < 1:009-0.6.p1
-Obsoletes: cpuspeed < 1:1.5-16
-Requires: kernel-tools-libs = %{version}-%{release}
-%endif
-%define __requires_exclude ^%{_bindir}/python
-%description -n kernel-tools
-This package contains the tools/ directory from the kernel source
-and the supporting documentation.
-
-%package -n kernel-tools-libs
-Summary: Libraries for the kernels-tools
-License: GPLv2
-%description -n kernel-tools-libs
-This package contains the libraries built from the tools/ directory
-from the kernel source.
-
-%package -n kernel-tools-libs-devel
-Summary: Assortment of tools for the Linux kernel
-License: GPLv2
-Requires: kernel-tools = %{version}-%{release}
-%ifarch %{cpupowerarchs}
-Provides: cpupowerutils-devel = 1:009-0.6.p1
-Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
-%endif
-Requires: kernel-tools-libs = %{version}-%{release}
-Provides: kernel-tools-devel
-%description -n kernel-tools-libs-devel
-This package contains the development files for the tools/ directory from
-the kernel source.
-
-%package -n kernel-tools-debuginfo
-Summary: Debug information for package kernel-tools
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n kernel-tools-debuginfo
-This package provides debug information for package kernel-tools.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
-
-# with_tools
-%endif
-
-%if %{with_bpftool}
-
-%package -n bpftool
-Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
-%description -n bpftool
-This package contains the bpftool, which allows inspection and simple
-manipulation of eBPF programs and maps.
-
-%package -n bpftool-debuginfo
-Summary: Debug information for package bpftool
-Group: Development/Debug
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
-AutoReqProv: no
-%description -n bpftool-debuginfo
-This package provides debug information for the bpftool package.
-
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}
-
-# with_bpftool
-%endif
-
-%if %{with_selftests}
-
-%package selftests-internal
-Summary: Kernel samples and selftests
-License: GPLv2
-Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3
-%description selftests-internal
-Kernel sample programs and selftests.
-
-# Note that this pattern only works right to match the .build-id
-# symlinks because of the trailing nonmatching alternation and
-# the leading .*, because of find-debuginfo.sh's buggy handling
-# of matching the pattern against the symlinks file.
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
-
-# with_selftests
-%endif
-
-%if %{with_gcov}
-%package gcov
-Summary: gcov graph and source files for coverage data collection.
-%description gcov
-kernel-gcov includes the gcov graph and source files for gcov coverage collection.
-%endif
-
-%package -n kernel-abi-stablelists
-Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
-AutoReqProv: no
-%description -n kernel-abi-stablelists
-The kABI package contains information pertaining to the Red Hat Enterprise
-Linux kernel ABI, including lists of kernel symbols that are needed by
-external Linux kernel modules, and a yum plugin to aid enforcement.
-
-%if %{with_kabidw_base}
-%package kernel-kabidw-base-internal
-Summary: The baseline dataset for kABI verification using DWARF data
-Group: System Environment/Kernel
-AutoReqProv: no
-%description kernel-kabidw-base-internal
-The package contains data describing the current ABI of the Red Hat Enterprise
-Linux kernel, suitable for the kabi-dw tool.
-%endif
-
-#
-# This macro creates a kernel-<subpackage>-debuginfo package.
-# %%kernel_debuginfo_package <subpackage>
-#
-# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
-# pae etc.) so the regex filters those kernels appropriately. We also
-# have to package several binaries as part of kernel-devel but getting
-# unique build-ids is tricky for these userspace binaries. We don't really
-# care about debugging those so we just filter those out and remove it.
-%define kernel_debuginfo_package() \
-%package %{?1:%{1}-}debuginfo\
-Summary: Debug information for package %{name}%{?1:-%{1}}\
-Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
-Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-%description %{?1:%{1}-}debuginfo\
-This package provides debug information for package %{name}%{?1:-%{1}}.\
-This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
-%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-devel package.
-# %%kernel_devel_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_package(m) \
-%package %{?1:%{1}-}devel\
-Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-AutoReqProv: no\
-Requires(pre): findutils\
-Requires: findutils\
-Requires: perl-interpreter\
-Requires: openssl-devel\
-Requires: elfutils-libelf-devel\
-Requires: bison\
-Requires: flex\
-Requires: make\
-Requires: gcc\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-devel-uname-r = %{KVERREL}\
-%endif\
-%description %{?1:%{1}-}devel\
-This package provides kernel headers and makefiles sufficient to build modules\
-against the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates an empty kernel-<subpackage>-devel-matched package that
-# requires both the core and devel packages locked on the same version.
-# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_devel_matched_package(m) \
-%package %{?1:%{1}-}devel-matched\
-Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
-Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
-Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
-%description %{?1:%{1}-}devel-matched\
-This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
-%{nil}
-
-#
-# kernel-<variant>-ipaclones-internal package
-#
-%define kernel_ipaclones_package() \
-%package %{?1:%{1}-}ipaclones-internal\
-Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
-Group: System Environment/Kernel\
-AutoReqProv: no\
-%description %{?1:%{1}-}ipaclones-internal\
-This package provides *.ipa-clones files.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-internal package.
-# %%kernel_modules_internal_package <subpackage> <pretty-name>
-#
-%define kernel_modules_internal_package() \
-%package %{?1:%{1}-}modules-internal\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Group: System Environment/Kernel\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-internal\
-This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules-extra package.
-# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_extra_package(m) \
-%package %{?1:%{1}-}modules-extra\
-Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-extra-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules-extra\
-This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage>-modules package.
-# %%kernel_modules_package [-m] <subpackage> <pretty-name>
-#
-%define kernel_modules_package(m) \
-%package %{?1:%{1}-}modules\
-Summary: kernel modules to match the %{?2:%{2}-}core kernel\
-Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
-Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
-Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
-Provides: installonlypkg(kernel-module)\
-Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\
-Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-modules-uname-r = %{KVERREL}\
-%endif\
-AutoReq: no\
-AutoProv: yes\
-%description %{?1:%{1}-}modules\
-This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
-%{nil}
-
-#
-# this macro creates a kernel-<subpackage> meta package.
-# %%kernel_meta_package <subpackage>
-#
-%define kernel_meta_package() \
-%package %{1}\
-summary: kernel meta-package for the %{1} kernel\
-Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\
-Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\
-Provides: installonlypkg(kernel)\
-%description %{1}\
-The meta-package for the %{1} kernel\
-%{nil}
-
-#
-# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
-# %%define variant_summary The Linux kernel compiled for <configuration>
-# %%kernel_variant_package [-n <pretty-name>] [-m] <subpackage>
-#
-%define kernel_variant_package(n:m) \
-%package %{?1:%{1}-}core\
-Summary: %{variant_summary}\
-Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\
-Provides: installonlypkg(kernel)\
-%if %{-m:1}%{!-m:0}\
-Requires: kernel-core-uname-r = %{KVERREL}\
-%endif\
-%{expand:%%kernel_reqprovconf}\
-%if %{?1:1} %{!?1:0} \
-%{expand:%%kernel_meta_package %{?1:%{1}}}\
-%endif\
-%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
-%if %{-m:0}%{!-m:1}\
-%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
-%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
-%endif\
-%{nil}
-
-# Now, each variant package.
-
-%if %{with_pae}
-%define variant_summary The Linux kernel compiled for Cortex-A15
-%kernel_variant_package lpae
-%description lpae-core
-This package includes a version of the Linux kernel with support for
-Cortex-A15 devices with LPAE and HW virtualisation support
-%endif
-
-%if %{with_zfcpdump}
-%define variant_summary The Linux kernel compiled for zfcpdump usage
-%kernel_variant_package zfcpdump
-%description zfcpdump-core
-The kernel package contains the Linux kernel (vmlinuz) for use by the
-zfcpdump infrastructure.
-# with_zfcpdump
-%endif
-
-%define variant_summary The Linux kernel compiled with extra debugging enabled
-%if !%{debugbuildsenabled}
-%kernel_variant_package -m debug
-%else
-%kernel_variant_package debug
-%endif
-%description debug-core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-This variant of the kernel has numerous debugging options enabled.
-It should only be installed when trying to gather additional information
-on kernel bugs, as some of these options impact performance noticably.
-
-# And finally the main -core package
-
-%define variant_summary The Linux kernel
-%kernel_variant_package
-%description core
-The kernel package contains the Linux kernel (vmlinuz), the core of any
-Linux operating system. The kernel handles the basic functions
-of the operating system: memory allocation, process allocation, device
-input and output, etc.
-
-%if %{with_ipaclones}
-%kernel_ipaclones_package
-%endif
-
-%prep
-# do a few sanity-checks for --with *only builds
-%if %{with_baseonly}
-%if !%{with_up}
-echo "Cannot build --with baseonly, up build is disabled"
-exit 1
-%endif
-%endif
-
-# more sanity checking; do it quietly
-if [ "%{patches}" != "%%{patches}" ] ; then
- for patch in %{patches} ; do
- if [ ! -f $patch ] ; then
- echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
- exit 1
- fi
- done
-fi 2>/dev/null
-
-patch_command='patch -p1 -F1 -s'
-ApplyPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
- if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
- echo "ERROR: Patch $patch not listed as a source patch in specfile"
- exit 1
- fi
- fi 2>/dev/null
- case "$patch" in
- *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
- *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
- esac
-}
-
-# don't apply patch if it's empty
-ApplyOptionalPatch()
-{
- local patch=$1
- shift
- if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
- exit 1
- fi
- local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
- if [ "$C" -gt 9 ]; then
- ApplyPatch $patch ${1+"$@"}
- fi
-}
-
-%setup -q -n kernel-%{tarfile_release} -c
-mv linux-%{tarfile_release} linux-%{KVERREL}
-
-cd linux-%{KVERREL}
-cp -a %{SOURCE1} .
-
-%if !%{nopatches}
-
-ApplyOptionalPatch patch-%{patchversion}-redhat.patch
-%endif
-
-ApplyOptionalPatch linux-kernel-test.patch
-
-# END OF PATCH APPLICATIONS
-
-# Any further pre-build tree manipulations happen here.
-
-chmod +x scripts/checkpatch.pl
-mv COPYING COPYING-%{version}-%{release}
-
-# This Prevents scripts/setlocalversion from mucking with our version numbers.
-touch .scmversion
-
-# Mangle /usr/bin/python shebangs to /usr/bin/python3
-# Mangle all Python shebangs to be Python 3 explicitly
-# -p preserves timestamps
-# -n prevents creating ~backup files
-# -i specifies the interpreter for the shebang
-# This fixes errors such as
-# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
-# We patch all sources below for which we got a report/error.
-pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
- tools/kvm/kvm_stat/kvm_stat \
- scripts/show_delta \
- scripts/diffconfig \
- scripts/bloat-o-meter \
- scripts/jobserver-exec \
- tools \
- Documentation \
- scripts/clang-tools
-
-# only deal with configs if we are going to build for the arch
-%ifnarch %nobuildarches
-
-if [ -L configs ]; then
- rm -f configs
-fi
-mkdir configs
-cd configs
-
-# Drop some necessary files from the source dir into the buildroot
-cp $RPM_SOURCE_DIR/kernel-*.config .
-cp %{SOURCE80} .
-# merge.pl
-cp %{SOURCE3000} .
-# kernel-local
-cp %{SOURCE3001} .
-FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
-
-# Merge in any user-provided local config option changes
-%ifnarch %nobuildarches
-for i in %{all_arch_configs}
-do
- mv $i $i.tmp
- ./merge.pl %{SOURCE3001} $i.tmp > $i
-%if %{with_gcov}
- echo "Merging with gcov options"
- cat %{SOURCE75}
- mv $i $i.tmp
- ./merge.pl %{SOURCE75} $i.tmp > $i
-%endif
- rm $i.tmp
-done
-%endif
-
-%if %{with clang_lto}
-for i in *aarch64*.config *x86_64*.config; do
- sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
- sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
-done
-%endif
-
-# Add DUP and kpatch certificates to system trusted keys for RHEL
-%if 0%{?rhel}
-%if %{signkernel}%{signmodules}
-openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
-openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
-cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem
-%ifarch s390x ppc64le
-openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
-cat secureboot.pem >> ../certs/rhel.pem
-%endif
-for i in *.config; do
- sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
-done
-%endif
-%endif
-
-cp %{SOURCE81} .
-OPTS=""
-%if %{with_configchecks}
- OPTS="$OPTS -w -n -c"
-%endif
-%if %{with clang_lto}
-for opt in %{clang_make_opts}; do
- OPTS="$OPTS -m $opt"
-done
-%endif
-RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
-
-cp %{SOURCE82} .
-RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
-
-# We may want to override files from the primary target in case of building
-# against a flavour of it (eg. centos not rhel), thus override it here if
-# necessary
-if [ "%{primary_target}" == "rhel" ]; then
-%if 0%{?centos}
- echo "Updating scripts/sources to centos version"
- RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
-%else
- echo "Not updating scripts/sources to centos version"
-%endif
-fi
-
-# end of kernel config
-%endif
-
-cd ..
-# # End of Configs stuff
-
-# get rid of unwanted files resulting from patch fuzz
-find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
-
-# remove unnecessary SCM files
-find . -name .gitignore -delete >/dev/null
-
-cd ..
-
-###
-### build
-###
-%build
-
-%if %{with_sparse}
-%define sparse_mflags C=1
-%endif
-
-cp_vmlinux()
-{
- eu-strip --remove-comment -o "$2" "$1"
-}
-
-# Note we need to disable these flags for cross builds because the flags
-# from redhat-rpm-config assume that host == target so target arch
-# flags cause issues with the host compiler.
-%if !%{with_cross}
-%define build_hostcflags %{?build_cflags}
-%define build_hostldflags %{?build_ldflags}
-%endif
-
-%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
-
-InitBuildVars() {
- # Initialize the kernel .config file and create some variables that are
- # needed for the actual build process.
-
- Variant=$1
-
- # Pick the right kernel config file
- Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
- DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
-
- KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
-
- # make sure EXTRAVERSION says what we want it to say
- # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
- ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
- perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
-
- # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
- # if we are post rc1 this should match anyway so this won't matter
- perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
-
- %{make} %{?_smp_mflags} mrproper
- cp configs/$Config .config
-
- %if %{signkernel}%{signmodules}
- cp configs/x509.genkey certs/.
- %endif
-
- Arch=`head -1 .config | cut -b 3-`
- echo USING ARCH=$Arch
-
- KCFLAGS="%{?kcflags}"
-
- # add kpatch flags for base kernel
- if [ "$Variant" == "" ]; then
- KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
- fi
-}
-
-BuildKernel() {
- MakeTarget=$1
- KernelImage=$2
- DoVDSO=$3
- Variant=$4
- InstallName=${5:-vmlinuz}
-
- DoModules=1
- if [ "$Variant" = "zfcpdump" ]; then
- DoModules=0
- fi
-
- # When the bootable image is just the ELF kernel, strip it.
- # We already copy the unstripped file into the debuginfo package.
- if [ "$KernelImage" = vmlinux ]; then
- CopyKernel=cp_vmlinux
- else
- CopyKernel=cp
- fi
-
- InitBuildVars $Variant
-
- echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
-
- %{make} ARCH=$Arch olddefconfig >/dev/null
-
- # This ensures build-ids are unique to allow parallel debuginfo
- perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
- if [ $DoModules -eq 1 ]; then
- %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
- fi
-
- mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
-%if %{with_debuginfo}
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
-%endif
-
-%ifarch %{arm} aarch64
- %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
- cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
- find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
-%endif
-
- # Start installing the results
- install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
- install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
- install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
- install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
-
- # We estimate the size of the initramfs because rpm needs to take this size
- # into consideration when performing disk space calculations. (See bz #530778)
- dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
-
- if [ -f arch/$Arch/boot/zImage.stub ]; then
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
- cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
- fi
-
- %if %{signkernel}
- if [ "$KernelImage" = vmlinux ]; then
- # We can't strip and sign $KernelImage in place, because
- # we need to preserve original vmlinux for debuginfo.
- # Use a copy for signing.
- $CopyKernel $KernelImage $KernelImage.tosign
- KernelImage=$KernelImage.tosign
- CopyKernel=cp
- fi
-
- # Sign the image if we're using EFI
- # aarch64 kernels are gziped EFI images
- KernelExtension=${KernelImage##*.}
- if [ "$KernelExtension" == "gz" ]; then
- SignImage=${KernelImage%.*}
- else
- SignImage=$KernelImage
- fi
-
- %ifarch x86_64 aarch64
- %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
- %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1}
- rm vmlinuz.tmp
- %endif
- %ifarch s390x ppc64le
- if [ -x /usr/bin/rpm-sign ]; then
- rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
- elif [ $DoModules -eq 1 ]; then
- chmod +x scripts/sign-file
- ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
- else
- mv $SignImage vmlinuz.signed
- fi
- %endif
-
- if [ ! -s vmlinuz.signed ]; then
- echo "pesigning failed"
- exit 1
- fi
- mv vmlinuz.signed $SignImage
- if [ "$KernelExtension" == "gz" ]; then
- gzip -f9 $SignImage
- fi
- # signkernel
- %endif
-
- $CopyKernel $KernelImage \
- $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
-
- # hmac sign the kernel for FIPS
- echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
- ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
- (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
- cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
-
- if [ $DoModules -eq 1 ]; then
- # Override $(mod-fw) because we don't want it to install any firmware
- # we'll get it from the linux-firmware package and we don't want conflicts
- %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
- fi
-
-%if %{with_gcov}
- # install gcov-needed files to $BUILDROOT/$BUILD/...:
- # gcov_info->filename is absolute path
- # gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
- # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
- find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
-%endif
-
- # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
- echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
- if [ $DoVDSO -ne 0 ]; then
- %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
- if [ -s ldconfig-kernel.conf ]; then
- install -D -m 444 ldconfig-kernel.conf \
- $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
- echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
- fi
-
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
- fi
-
- # And save the headers/makefiles etc for building modules against
- #
- # This all looks scary, but the end result is supposed to be:
- # * all arch relevant include/ files
- # * all Makefile/Kconfig files
- # * all script/ files
-
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
- # dirs for additional modules per module-init-tools, kbuild/modules.txt
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
- # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
- # testing so just delete
- find . -name *.h.s -delete
- # first copy everything
- cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ ! -e Module.symvers ]; then
- touch Module.symvers
- fi
- cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- if [ -s Module.markers ]; then
- cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-
- # create the kABI metadata for use in packaging
- # NOTENOTE: the name symvers is used by the rpm backend
- # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
- # NOTENOTE: script which dynamically adds exported kernel symbol
- # NOTENOTE: checksums to the rpm metadata provides list.
- # NOTENOTE: if you change the symvers name, update the backend too
- echo "**** GENERATING kernel ABI metadata ****"
- gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
- cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
-
-%if %{with_kabichk}
- echo "**** kABI checking is enabled in kernel SPEC file. ****"
- chmod 0755 $RPM_SOURCE_DIR/check-kabi
- if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidupchk}
- echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
- if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
- cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
- $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
- # for now, don't keep it around.
- rm $RPM_BUILD_ROOT/Module.kabi
- else
- echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
- fi
-%endif
-
-%if %{with_kabidw_base}
- # Don't build kabi base for debug kernels
- if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
-
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI baseline dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
-%if %{with_kabidwchk}
- if [ "$Variant" != "zfcpdump" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
- tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
- if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
- mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
- tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
-
- echo "**** GENERATING DWARF-based kABI dataset ****"
- chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
- "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
- "$(pwd)" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
-
- echo "**** kABI DWARF-based comparison report ****"
- $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
- "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
- echo "**** End of kABI DWARF-based comparison report ****"
- else
- echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
- fi
-
- rm -rf $RPM_BUILD_ROOT/kabi-dwarf
- fi
-%endif
-
- # then drop all but the needed Makefiles/Kconfig files
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
- cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
- rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
-
-%ifarch s390x
- # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline.o
- # which is needed during external module build.
- if [ -f arch/s390/lib/expoline.o ]; then
- cp -a --parents arch/s390/lib/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- fi
-%endif
-
- # Files for 'make scripts' to succeed with kernel-devel.
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
- cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
- cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- # Files for 'make prepare' to succeed with kernel-devel.
- cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
- if [ -f tools/objtool/objtool ]; then
- cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -f tools/objtool/fixdep ]; then
- cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
- fi
- if [ -d arch/$Arch/scripts ]; then
- cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
- fi
- if [ -f arch/$Arch/*lds ]; then
- cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
- fi
- if [ -f arch/%{asmarch}/kernel/module.lds ]; then
- cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-%ifarch ppc64le
- cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- if [ -d arch/%{asmarch}/include ]; then
- cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
-%ifarch aarch64
- # arch/arm64/include/asm/xen references arch/arm
- cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- # arch/arm64/include/asm/opcodes.h references arch/arm
- cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-%endif
- # include the machine specific headers for ARM variants, if available.
-%ifarch %{arm}
- if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
- cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- fi
- # include a few files for 'make prepare'
- cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
-%endif
- cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
-%ifarch i686 x86_64
- # files for 'make prepare' to succeed with kernel-devel
- cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
- cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
-
- cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
- cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%endif
- # Clean up intermediate tools files
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
-
- # Make sure the Makefile, version.h, and auto.conf have a matching
- # timestamp so that external modules can be built
- touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
- $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
-
-%if %{with_debuginfo}
- eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
- cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
-
- #
- # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
- #
- mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
- if [ -n "%{vmlinux_decompressor}" ]; then
- eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
- # Without build-id the build will fail. But for s390 the build-id
- # wasn't added before 5.11. In case it is missing prefer not
- # packaging the debuginfo over a build failure.
- if [ -s vmlinux.decompressor.id ]; then
- cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
- cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
- fi
- fi
-%endif
-
- find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
-
- # mark modules executable so that strip-to-file can strip them
- xargs --no-run-if-empty chmod u+x < modnames
-
- # Generate a list of modules for block and networking.
-
- grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
- sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
-
- collect_modules_list()
- {
- sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
- LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- if [ ! -z "$3" ]; then
- sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
- fi
- }
-
- collect_modules_list networking \
- 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
- collect_modules_list block \
- 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
- collect_modules_list drm \
- 'drm_open|drm_init'
- collect_modules_list modesetting \
- 'drm_crtc_init'
-
- # detect missing or incorrect license tags
- ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
- grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
-
- remove_depmod_files()
- {
- # remove files that will be auto generated by depmod at rpm -i time
- pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
- rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
- modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
- popd
- }
-
- remove_depmod_files
-
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
- # Identify modules in the kernel-modules-extras package
- %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
-
- #
- # Generate the kernel-core and kernel-modules files lists
- #
-
- # Copy the System.map file for depmod to use, and create a backup of the
- # full module tree so we can restore it after we're done filtering
- cp System.map $RPM_BUILD_ROOT/.
- cp configs/filter-*.sh $RPM_BUILD_ROOT/.
- pushd $RPM_BUILD_ROOT
- mkdir restore
- cp -r lib/modules/$KernelVer/* restore/.
-
- # don't include anything going into kernel-modules-extra in the file lists
- xargs rm -rf < mod-extra.list
- # don't include anything going int kernel-modules-internal in the file lists
- xargs rm -rf < mod-internal.list
-
- if [ $DoModules -eq 1 ]; then
- # Find all the module files and filter them out into the core and
- # modules lists. This actually removes anything going into -modules
- # from the dir.
- find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
- ./filter-modules.sh modules.list %{_target_cpu}
- rm filter-*.sh
-
- # Run depmod on the resulting module tree and make sure it isn't broken
- depmod -b . -aeF ./System.map $KernelVer &> depmod.out
- if [ -s depmod.out ]; then
- echo "Depmod failure"
- cat depmod.out
- exit 1
- else
- rm depmod.out
- fi
- else
- # Ensure important files/directories exist to let the packaging succeed
- echo '%%defattr(-,-,-)' > modules.list
- echo '%%defattr(-,-,-)' > k-d.list
- mkdir -p lib/modules/$KernelVer/kernel
- # Add files usually created by make modules, needed to prevent errors
- # thrown by depmod during package installation
- touch lib/modules/$KernelVer/modules.order
- touch lib/modules/$KernelVer/modules.builtin
- fi
-
- remove_depmod_files
-
- # Go back and find all of the various directories in the tree. We use this
- # for the dir lists in kernel-core
- find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
-
- # Cleanup
- rm System.map
- # Just "cp -r" can be very slow: here, it rewrites _existing files_
- # with open(O_TRUNC). Many filesystems synchronously wait for metadata
- # update for such file rewrites (seen in strace as final close syscall
- # taking a long time). On a rotational disk, cp was observed to take
- # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
- # With --remove-destination, we avoid this, and copying
- # (with enough RAM to cache it) takes 5 seconds:
- cp -r --remove-destination restore/* lib/modules/$KernelVer/.
- rm -rf restore
- popd
-
- # Make sure the files lists start with absolute paths or rpmbuild fails.
- # Also add in the dir entries
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
- sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
- sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list
-
- # Cleanup
- rm -f $RPM_BUILD_ROOT/k-d.list
- rm -f $RPM_BUILD_ROOT/modules.list
- rm -f $RPM_BUILD_ROOT/module-dirs.list
- rm -f $RPM_BUILD_ROOT/mod-extra.list
- rm -f $RPM_BUILD_ROOT/mod-internal.list
-
-%if %{signmodules}
- if [ $DoModules -eq 1 ]; then
- # Save the signing keys so we can sign the modules in __modsign_install_post
- cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
- cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
- fi
-%endif
-
- # Move the devel headers out of the root file system
- mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
- mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
-
- # This is going to create a broken link during the build, but we don't use
- # it after this point. We need the link to actually point to something
- # when kernel-devel is installed, and a relative link doesn't work across
- # the F17 UsrMove feature.
- ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
-
-%ifnarch armv7hl
- # Generate vmlinux.h and put it to kernel-devel path
- bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
-%endif
-
- # prune junk from kernel-devel
- find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
-
- # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
- mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
- %ifarch x86_64 aarch64
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer
- install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer
- ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %else
- install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- %endif
- %ifarch s390x ppc64le
- if [ $DoModules -eq 1 ]; then
- if [ -x /usr/bin/rpm-sign ]; then
- install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- else
- install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
- openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
- fi
- fi
- %endif
-
-%if %{with_ipaclones}
- MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
- if [ -z "$MAXPROCS" ]; then
- MAXPROCS=1
- fi
- if [ "$Variant" == "" ]; then
- mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
- find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
- fi
-%endif
-
-}
-
-###
-# DO it...
-###
-
-# prepare directories
-rm -rf $RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/boot
-mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
-
-cd linux-%{KVERREL}
-
-
-%if %{with_debug}
-BuildKernel %make_target %kernel_image %{_use_vdso} debug
-%endif
-
-%if %{with_zfcpdump}
-BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
-%endif
-
-%if %{with_pae}
-BuildKernel %make_target %kernel_image %{use_vdso} lpae
-%endif
-
-%if %{with_up}
-BuildKernel %make_target %kernel_image %{_use_vdso}
-%endif
-
-%ifnarch noarch i686
-%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up}
-# If only building the user space tools, then initialize the build environment
-# and some variables so that the various userspace tools can be built.
-InitBuildVars
-%endif
-%endif
-
-%ifarch aarch64
-%global perf_build_extra_opts CORESIGHT=1
-%endif
-%global perf_make \
- %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
-%if %{with_perf}
-# perf
-# make sure check-headers.sh is executable
-chmod +x tools/perf/check-headers.sh
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
-%endif
-
-%global tools_make \
- CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-# cpupower
-# make sure version-gen.sh is executable.
-chmod +x tools/power/cpupower/utils/version-gen.sh
-%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
- popd
-%endif
-%ifarch x86_64
- pushd tools/power/x86/x86_energy_perf_policy/
- %{tools_make}
- popd
- pushd tools/power/x86/turbostat
- %{tools_make}
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make}
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
- popd
-%endif
-%endif
-pushd tools/thermal/tmon/
-%{tools_make}
-popd
-pushd tools/iio/
-%{tools_make}
-popd
-pushd tools/gpio/
-%{tools_make}
-popd
-# build VM tools
-pushd tools/vm/
-%{tools_make} slabinfo page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%global bpftool_make \
- %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make}
-popd
-%endif
-
-%if %{with_selftests}
-# Unfortunately, samples/bpf/Makefile expects that the headers are installed
-# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
-# but there's no way to tell the Makefile to take them from there.
-%{make} %{?_smp_mflags} headers_install
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ || true
-
-# Prevent bpf selftests to build bpftool repeatedly:
-export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool
-
-pushd tools/testing/selftests
-# We need to install here because we need to call make with ARCH set which
-# doesn't seem possible to do in the install section.
-%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf vm livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install
-
-# 'make install' for bpf is broken and upstream refuses to fix it.
-# Install the needed files manually.
-for dir in bpf bpf/no_alu32 bpf/progs; do
- # In ARK, the rpm build continues even if some of the selftests
- # cannot be built. It's not always possible to build selftests,
- # as upstream sometimes dependens on too new llvm version or has
- # other issues. If something did not get built, just skip it.
- test -d $dir || continue
- mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
- find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
- -name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
- -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
- xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
-done
-popd
-export -n BPFTOOL
-%endif
-
-%if %{with_doc}
-# Make the HTML pages.
-%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
-
-# sometimes non-world-readable files sneak into the kernel source tree
-chmod -R a=rX Documentation
-find Documentation -type d | xargs chmod u+w
-%endif
-
-# In the modsign case, we do 3 things. 1) We check the "variant" and hard
-# code the value in the following invocations. This is somewhat sub-optimal
-# but we're doing this inside of an RPM macro and it isn't as easy as it
-# could be because of that. 2) We restore the .tmp_versions/ directory from
-# the one we saved off in BuildKernel above. This is to make sure we're
-# signing the modules we actually built/installed in that variant. 3) We
-# grab the arch and invoke mod-sign.sh command to actually sign the modules.
-#
-# We have to do all of those things _after_ find-debuginfo runs, otherwise
-# that will strip the signature off of the modules.
-#
-# Don't sign modules for the zfcpdump variant as it is monolithic.
-
-%define __modsign_install_post \
- if [ "%{signmodules}" -eq "1" ]; then \
- if [ "%{with_pae}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
- fi \
- if [ "%{with_debug}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
- fi \
- if [ "%{with_up}" -ne "0" ]; then \
- %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
- fi \
- fi \
- if [ "%{zipmodules}" -eq "1" ]; then \
- find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P${RPM_BUILD_NCPUS} -r xz; \
- fi \
-%{nil}
-
-###
-### Special hacks for debuginfo subpackages.
-###
-
-# This macro is used by %%install, so we must redefine it before that.
-%define debug_package %{nil}
-
-%if %{with_debuginfo}
-
-%ifnarch noarch
-%global __debug_package 1
-%files -f debugfiles.list debuginfo-common-%{_target_cpu}
-%endif
-
-%endif
-
-# We don't want to package debuginfo for self-tests and samples but
-# we have to delete them to avoid an error messages about unpackaged
-# files.
-# Delete the debuginfo for kernel-devel files
-%define __remove_unwanted_dbginfo_install_post \
- if [ "%{with_selftests}" -ne "0" ]; then \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
- fi \
- rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
-%{nil}
-
-#
-# Disgusting hack alert! We need to ensure we sign modules *after* all
-# invocations of strip occur, which is in __debug_install_post if
-# find-debuginfo.sh runs, and __os_install_post if not.
-#
-%define __spec_install_post \
- %{?__debug_package:%{__debug_install_post}}\
- %{__arch_install_post}\
- %{__os_install_post}\
- %{__remove_unwanted_dbginfo_install_post}\
- %{__modsign_install_post}
-
-###
-### install
-###
-
-%install
-
-cd linux-%{KVERREL}
-
-%if %{with_doc}
-docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-
-# copy the source over
-mkdir -p $docdir
-tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
-
-# with_doc
-%endif
-
-# We have to do the headers install before the tools install because the
-# kernel headers_install will remove any header files in /usr/include that
-# it doesn't install itself.
-
-%if %{with_headers}
-# Install kernel headers
-%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
-
-find $RPM_BUILD_ROOT/usr/include \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-%endif
-
-%if %{with_cross_headers}
-%if 0%{?fedora}
-HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
-%else
-HDR_ARCH_LIST='arm64 powerpc s390 x86'
-%endif
-mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
-
-for arch in $HDR_ARCH_LIST; do
- mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
- %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
-done
-
-find $RPM_BUILD_ROOT/usr/tmp-headers \
- \( -name .install -o -name .check -o \
- -name ..install.cmd -o -name ..check.cmd \) -delete
-
-# Copy all the architectures we care about to their respective asm directories
-for arch in $HDR_ARCH_LIST ; do
- mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
- mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
-done
-
-rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
-%endif
-
-%if %{with_kernel_abi_stablelists}
-# kabi directory
-INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
-mkdir -p $INSTALL_KABI_PATH
-
-# install kabi releases directories
-tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
-# with_kernel_abi_stablelists
-%endif
-
-%if %{with_perf}
-# perf tool binary and supporting scripts/binaries
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
-# remove the 'trace' symlink.
-rm -f %{buildroot}%{_bindir}/trace
-
-# For both of the below, yes, this should be using a macro but right now
-# it's hard coded and we don't actually want it anyway right now.
-# Whoever wants examples can fix it up!
-
-# remove examples
-rm -rf %{buildroot}/usr/lib/perf/examples
-rm -rf %{buildroot}/usr/lib/perf/include
-
-# python-perf extension
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
-
-# perf man pages (note: implicit rpm magic compresses them later)
-mkdir -p %{buildroot}/%{_mandir}/man1
-%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
-
-# remove any tracevent files, eg. its plugins still gets built and installed,
-# even if we build against system's libtracevent during perf build (by setting
-# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
-# ship with libtraceevent package.
-rm -rf %{buildroot}%{_libdir}/traceevent
-%endif
-
-%if %{with_tools}
-%ifarch %{cpupowerarchs}
-%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
-rm -f %{buildroot}%{_libdir}/*.{a,la}
-%find_lang cpupower
-mv cpupower.lang ../
-%ifarch x86_64
- pushd tools/power/cpupower/debug/x86_64
- install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
- install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
- popd
-%endif
-chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
-mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
-install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
-install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
-%endif
-%ifarch x86_64
- mkdir -p %{buildroot}%{_mandir}/man8
- pushd tools/power/x86/x86_energy_perf_policy
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/turbostat
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/power/x86/intel-speed-select
- %{tools_make} DESTDIR=%{buildroot} install
- popd
- pushd tools/arch/x86/intel_sdsi
- %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
- popd
-%endif
-pushd tools/thermal/tmon
-%{tools_make} INSTALL_ROOT=%{buildroot} install
-popd
-pushd tools/iio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-pushd tools/gpio
-%{tools_make} DESTDIR=%{buildroot} install
-popd
-install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
-pushd tools/kvm/kvm_stat
-%{__make} INSTALL_ROOT=%{buildroot} install-tools
-%{__make} INSTALL_ROOT=%{buildroot} install-man
-install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
-popd
-# install VM tools
-pushd tools/vm/
-install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
-install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
-popd
-%endif
-
-if [ -f $DevelDir/vmlinux.h ]; then
- RPM_VMLINUX_H=$DevelDir/vmlinux.h
-fi
-
-%if %{with_bpftool}
-pushd tools/bpf/bpftool
-%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
-popd
-%endif
-
-%if %{with_selftests}
-pushd samples
-install -d %{buildroot}%{_libexecdir}/ksamples
-# install bpf samples
-pushd bpf
-install -d %{buildroot}%{_libexecdir}/ksamples/bpf
-find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
-install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
-# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
-# kernel tree. Just remove it.
-rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
-install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
-install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
-popd
-# install pktgen samples
-pushd pktgen
-install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
-find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
-popd
-popd
-# install vm selftests
-pushd tools/testing/selftests/vm
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/vm/{} \;
-popd
-# install drivers/net/mlxsw selftests
-pushd tools/testing/selftests/drivers/net/mlxsw
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
-popd
-# install drivers/net/netdevsim selftests
-pushd tools/testing/selftests/drivers/net/netdevsim
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
-popd
-# install net/forwarding selftests
-pushd tools/testing/selftests/net/forwarding
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
-popd
-# install net/mptcp selftests
-pushd tools/testing/selftests/net/mptcp
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
-popd
-# install tc-testing selftests
-pushd tools/testing/selftests/tc-testing
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
-popd
-# install livepatch selftests
-pushd tools/testing/selftests/livepatch
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
-popd
-# install netfilter selftests
-pushd tools/testing/selftests/netfilter
-find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
-popd
-%endif
-
-###
-### clean
-###
-
-###
-### scripts
-###
-
-%if %{with_tools}
-%post -n kernel-tools-libs
-/sbin/ldconfig
-
-%postun -n kernel-tools-libs
-/sbin/ldconfig
-%endif
-
-#
-# This macro defines a %%post script for a kernel*-devel package.
-# %%kernel_devel_post [<subpackage>]
-# Note we don't run hardlink if ostree is in use, as ostree is
-# a far more sophisticated hardlink implementation.
-# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
-#
-# The deletion of *.hardlink-temporary files is a temporary workaround
-# for this bug in the hardlink binary (fixed in util-linux 2.38):
-# https://github.com/util-linux/util-linux/issues/1602
-#
-%define kernel_devel_post() \
-%{expand:%%post %{?1:%{1}-}devel}\
-if [ -f /etc/sysconfig/kernel ]\
-then\
- . /etc/sysconfig/kernel || exit $?\
-fi\
-if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
-then\
- (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
- /usr/bin/find . -type f | while read f; do\
- hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
- done;\
- /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
- )\
-fi\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-extra package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_extra_post [<subpackage>]
-#
-%define kernel_modules_extra_post() \
-%{expand:%%post %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-extra}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules-internal package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_internal_post [<subpackage>]
-#
-%define kernel_modules_internal_post() \
-%{expand:%%post %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules-internal}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel*-modules package.
-# It also defines a %%postun script that does the same thing.
-# %%kernel_modules_post [<subpackage>]
-#
-%define kernel_modules_post() \
-%{expand:%%post %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
- mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
- touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
-fi\
-%{nil}\
-%{expand:%%postun %{?1:%{1}-}modules}\
-/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
-%{nil}\
-%{expand:%%posttrans %{?1:%{1}-}modules}\
-if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
- rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
- echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
- dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
-fi\
-%{nil}
-
-# This macro defines a %%posttrans script for a kernel package.
-# %%kernel_variant_posttrans [<subpackage>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_posttrans() \
-%{expand:%%posttrans %{?1:%{1}-}core}\
-%if 0%{!?fedora:1}\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%endif\
-rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-%{nil}
-
-#
-# This macro defines a %%post script for a kernel package and its devel package.
-# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
-# More text can follow to go at the end of this variant's %%post.
-#
-%define kernel_variant_post(v:r:) \
-%{expand:%%kernel_devel_post %{?-v*}}\
-%{expand:%%kernel_modules_post %{?-v*}}\
-%{expand:%%kernel_modules_extra_post %{?-v*}}\
-%{expand:%%kernel_modules_internal_post %{?-v*}}\
-%{expand:%%kernel_variant_posttrans %{?-v*}}\
-%{expand:%%post %{?-v*:%{-v*}-}core}\
-%{-r:\
-if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
- [ -f /etc/sysconfig/kernel ]; then\
- /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
-fi}\
-mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
-touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}}\
-%{nil}
-
-#
-# This macro defines a %%preun script for a kernel package.
-# %%kernel_variant_preun <subpackage>
-#
-%define kernel_variant_preun() \
-%{expand:%%preun %{?1:%{1}-}core}\
-/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
-if [ -x %{_sbindir}/weak-modules ]\
-then\
- %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\
-fi\
-%{nil}
-
-%kernel_variant_preun
-%kernel_variant_post -r kernel-smp
-
-%if %{with_pae}
-%kernel_variant_preun lpae
-%kernel_variant_post -v lpae -r (kernel|kernel-smp)
-%endif
-
-%if %{with_debug}
-%kernel_variant_preun debug
-%kernel_variant_post -v debug
-%endif
-
-%if %{with_zfcpdump}
-%kernel_variant_preun zfcpdump
-%kernel_variant_post -v zfcpdump
-%endif
-
-if [ -x /sbin/ldconfig ]
-then
- /sbin/ldconfig -X || exit $?
-fi
-
-###
-### file lists
-###
-
-%if %{with_headers}
-%files headers
-/usr/include/*
-%endif
-
-%if %{with_cross_headers}
-%files cross-headers
-/usr/*-linux-gnu/include/*
-%endif
-
-%if %{with_kernel_abi_stablelists}
-%files -n kernel-abi-stablelists
-/lib/modules/kabi-*
-%endif
-
-%if %{with_kabidw_base}
-%ifarch x86_64 s390x ppc64 ppc64le aarch64
-%files kernel-kabidw-base-internal
-%defattr(-,root,root)
-/kabidw-base/%{_target_cpu}/*
-%endif
-%endif
-
-# only some architecture builds need kernel-doc
-%if %{with_doc}
-%files doc
-%defattr(-,root,root)
-%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
-%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
-%endif
-
-%if %{with_perf}
-%files -n perf
-%{_bindir}/perf
-%{_libdir}/libperf-jvmti.so
-%dir %{_libexecdir}/perf-core
-%{_libexecdir}/perf-core/*
-%{_datadir}/perf-core/*
-%{_mandir}/man[1-8]/perf*
-%{_sysconfdir}/bash_completion.d/perf
-%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
-%{_docdir}/perf-tip/tips.txt
-
-%files -n python3-perf
-%{python3_sitearch}/*
-
-%if %{with_debuginfo}
-%files -f perf-debuginfo.list -n perf-debuginfo
-
-%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
-%endif
-# with_perf
-%endif
-
-%if %{with_tools}
-%ifnarch %{cpupowerarchs}
-%files -n kernel-tools
-%else
-%files -n kernel-tools -f cpupower.lang
-%{_bindir}/cpupower
-%{_datadir}/bash-completion/completions/cpupower
-%ifarch x86_64
-%{_bindir}/centrino-decode
-%{_bindir}/powernow-k8-decode
-%endif
-%{_unitdir}/cpupower.service
-%{_mandir}/man[1-8]/cpupower*
-%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
-%ifarch x86_64
-%{_bindir}/x86_energy_perf_policy
-%{_mandir}/man8/x86_energy_perf_policy*
-%{_bindir}/turbostat
-%{_mandir}/man8/turbostat*
-%{_bindir}/intel-speed-select
-%{_sbindir}/intel_sdsi
-%endif
-# cpupowerarchs
-%endif
-%{_bindir}/tmon
-%{_bindir}/iio_event_monitor
-%{_bindir}/iio_generic_buffer
-%{_bindir}/lsiio
-%{_bindir}/lsgpio
-%{_bindir}/gpio-hammer
-%{_bindir}/gpio-event-mon
-%{_bindir}/gpio-watch
-%{_mandir}/man1/kvm_stat*
-%{_bindir}/kvm_stat
-%{_unitdir}/kvm_stat.service
-%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
-%{_bindir}/page_owner_sort
-%{_bindir}/slabinfo
-
-%if %{with_debuginfo}
-%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
-%endif
-
-%ifarch %{cpupowerarchs}
-%files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
-%{_libdir}/libcpupower.so.0.0.1
-
-%files -n kernel-tools-libs-devel
-%{_libdir}/libcpupower.so
-%{_includedir}/cpufreq.h
-%endif
-# with_tools
-%endif
-
-%if %{with_bpftool}
-%files -n bpftool
-%{_sbindir}/bpftool
-%{_sysconfdir}/bash_completion.d/bpftool
-%{_mandir}/man8/bpftool-cgroup.8.gz
-%{_mandir}/man8/bpftool-gen.8.gz
-%{_mandir}/man8/bpftool-iter.8.gz
-%{_mandir}/man8/bpftool-link.8.gz
-%{_mandir}/man8/bpftool-map.8.gz
-%{_mandir}/man8/bpftool-prog.8.gz
-%{_mandir}/man8/bpftool-perf.8.gz
-%{_mandir}/man8/bpftool.8.gz
-%{_mandir}/man8/bpftool-net.8.gz
-%{_mandir}/man8/bpftool-feature.8.gz
-%{_mandir}/man8/bpftool-btf.8.gz
-%{_mandir}/man8/bpftool-struct_ops.8.gz
-
-%if %{with_debuginfo}
-%files -f bpftool-debuginfo.list -n bpftool-debuginfo
-%defattr(-,root,root)
-%endif
-%endif
-
-%if %{with_selftests}
-%files selftests-internal
-%{_libexecdir}/ksamples
-%{_libexecdir}/kselftests
-%endif
-
-# empty meta-package
-%ifnarch %nobuildarches noarch
-%files
-%endif
-
-%if %{with_gcov}
-%ifnarch %nobuildarches noarch
-%files gcov
-%{_builddir}
-%endif
-%endif
-
-# This is %%{image_install_path} on an arch where that includes ELF files,
-# or empty otherwise.
-%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
-
-#
-# This macro defines the %%files sections for a kernel package
-# and its devel and debuginfo packages.
-# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
-#
-%define kernel_variant_files(k:) \
-%if %{2}\
-%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
-%{!?_licensedir:%global license %%doc}\
-%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
-%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
-%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
-%ifarch %{arm} aarch64\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
-%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
-%endif\
-%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
-%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
-%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
-%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
-%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
-%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
-%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
-%if %{1}\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
-%endif\
-/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
-%{expand:%%files %{?3:%{3}-}devel}\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
-%{expand:%%files %{?3:%{3}-}devel-matched}\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
-%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
-%{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\
-%if %{with_debuginfo}\
-%ifnarch noarch\
-%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
-%endif\
-%endif\
-%if %{?3:1} %{!?3:0}\
-%{expand:%%files %{3}}\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_files %{_use_vdso} %{with_up}
-%kernel_variant_files %{_use_vdso} %{with_debug} debug
-%if %{with_debug_meta}
-%files debug
-%files debug-core
-%files debug-devel
-%files debug-devel-matched
-%files debug-modules
-%files debug-modules-extra
-%endif
-%kernel_variant_files %{use_vdso} %{with_pae} lpae
-%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
-
-%define kernel_variant_ipaclones(k:) \
-%if %{1}\
-%if %{with_ipaclones}\
-%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
-%defattr(-,root,root)\
-%defverify(not mtime)\
-/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
-%endif\
-%endif\
-%{nil}
-
-%kernel_variant_ipaclones %{with_up}
-
-# plz don't put in a version string unless you're going to tag
-# and build.
-#
-#
-%changelog
Mon Mar 28 2022 Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx> [5.17.0-0.rc0.78e36f3b0dae.6.test]
-
-###
-# The following Emacs magic makes C-c C-e use UTC dates.
-# Local Variables:
-# rpm-change-log-uses-utc: t
-# End:
-###
--
https://gitlab.com/cki-project/kernel-ark/-/merge_requests/1878
_______________________________________________
kernel mailing list -- kernel@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to kernel-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/kernel@xxxxxxxxxxxxxxxxxxxxxxx
Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
