From: Prarit Bhargava <prarit@xxxxxxxxxx>
redhat/genspec.sh: Remove options and use Makefile variables
genspec.sh has 22 parameters that must be specified on the command line
which are generated by the Makefile. Instead of passing these parameters
on the command line, export them directly from the Makefile.
Remove genspec.sh options and export the variables from the Makefile.
Signed-off-by: Prarit Bhargava <prarit@xxxxxxxxxx>
diff --git a/redhat/Makefile b/redhat/Makefile
index blahblah..blahblah 100644
--- a/redhat/Makefile
+++ b/redhat/Makefile
@@ -237,7 +237,7 @@ setup-source: dist-git-version-check dist-clean-sources
echo "Error: PATCHLIST_URL must be set (to 'none' or any URL)"; \
exit 1; \
fi
- @$(REDHAT)/genspec.sh $(SOURCES) $(SOURCES)/$(SPECFILE) $(SOURCES)/$(CHANGELOG) $(PKGRELEASE) $(RPMKVERSION) $(RPMKPATCHLEVEL) $(RPMKSUBLEVEL) $(DISTRO_BUILD) $(RELEASED_KERNEL) $(SPECRELEASE) $(__ZSTREAM) "$(BUILDOPTS)" $(MARKER) `cat $(REDHAT)/marker` $(SINGLE_TARBALL) $(TARFILE_RELEASE) $(SNAPSHOT) $(UPSTREAM_BRANCH) $(INCLUDE_FEDORA_FILES) $(INCLUDE_RHEL_FILES) $(PATCHLIST_URL) $(BUILDID)
+ @$(REDHAT)/genspec.sh
@cp $(SOURCES)/$(SPECFILE) $(SOURCES)/../SPECS/
generate-testpatch-tmp:
@@ -564,3 +564,5 @@ dist-full-help:
@echo ' target used by the current branch/tree.'
@echo ' dist-self-test - Runs self-tests from the redhat/self-test directory'
@echo ''
+
+export
diff --git a/redhat/genspec.sh b/redhat/genspec.sh
index blahblah..blahblah 100755
--- a/redhat/genspec.sh
+++ b/redhat/genspec.sh
@@ -1,32 +1,7 @@
#!/bin/bash
-#
-# Arguments
-# SNAPSHOT: indicates whether or not this is based on an upstream tag. 1
-# indicates it is not, 0 indicates it is.
-
-SOURCES=$1
-SPECFILE=$2
-CHANGELOG=$3
-PKGRELEASE=$4
-KVERSION=$5
-KPATCHLEVEL=$6
-KSUBLEVEL=$7
-DISTRO_BUILD=$8
-RELEASED_KERNEL=$9
-SPECRELEASE=${10}
-ZSTREAM_FLAG=${11}
-BUILDOPTS=${12}
-MARKER=${13}
-LAST_MARKER=${14}
-SINGLE_TARBALL=${15}
-TARFILE_RELEASE=${16}
-SNAPSHOT=${17}
-UPSTREAM_BRANCH=${18}
-INCLUDE_FEDORA_FILES=${19}
-INCLUDE_RHEL_FILES=${20}
-PATCHLIST_URL=${21}
-BUILDID=${22}
-RPMVERSION=${KVERSION}.${KPATCHLEVEL}
+
+LAST_MARKER=$(cat $REDHAT/marker)
+RPMVERSION=${RPMKVERSION}.${RPMKPATCHLEVEL}
clogf="$SOURCES/changelog"
# hide [redhat] entries from changelog
HIDE_REDHAT=1;
@@ -76,7 +51,7 @@ fi
# This means we need to zap entries that are already present in the changelog.
if [ "$MARKER" != "$LAST_MARKER" ]; then
# awk trick to get all unique lines
- awk '!seen[$0]++' "$CHANGELOG" "$clogf" > "$clogf.unique"
+ awk '!seen[$0]++' "$SOURCES/$CHANGELOG" "$clogf" > "$clogf.unique"
# sed trick to get the end of the changelog minus the line
sed -e '1,/# END OF CHANGELOG/ d' "$clogf.unique" > "$clogf.tmp"
# Add an explicit entry to indicate a rebase.
@@ -109,8 +84,8 @@ if [ "$LENGTH" = 0 ]; then
rm -f "$clogf.rev"; touch "$clogf.rev"
fi
-cat "$clogf.rev" "$CHANGELOG" > "$clogf.full"
-mv -f "$clogf.full" "$CHANGELOG"
+cat "$clogf.rev" "$SOURCES/$CHANGELOG" > "$clogf.full"
+mv -f "$clogf.full" "$SOURCES/$CHANGELOG"
if [ "$SNAPSHOT" = 0 ]; then
# This is based off a tag on Linus's tree (e.g. v5.5 or v5.5-rc5).
@@ -154,14 +129,14 @@ if [ "$PATCHLIST_URL" != "none" ]; then
PATCHLIST_CHANGELOG=1
fi
-test -n "$SPECFILE" &&
- sed -i -e "
- /%%CHANGELOG%%/r $CHANGELOG
+test -f "$SOURCES/$SPECFILE" &&
+ sed -i -e "
+ /%%CHANGELOG%%/r $SOURCES/$CHANGELOG
/%%CHANGELOG%%/d
s/%%BUILDID%%/$BUILDID_DEFINE/
- s/%%KVERSION%%/$KVERSION/
- s/%%KPATCHLEVEL%%/$KPATCHLEVEL/
- s/%%KSUBLEVEL%%/$KSUBLEVEL/
+ s/%%KVERSION%%/$RPMKVERSION/
+ s/%%KPATCHLEVEL%%/$RPMKPATCHLEVEL/
+ s/%%KSUBLEVEL%%/$RPMKSUBLEVEL/
s/%%PKGRELEASE%%/$PKGRELEASE/
s/%%SPECRELEASE%%/$SPECRELEASE/
s/%%DISTRO_BUILD%%/$DISTRO_BUILD/
@@ -170,7 +145,7 @@ test -n "$SPECFILE" &&
s/%%INCLUDE_FEDORA_FILES%%/$INCLUDE_FEDORA_FILES/
s/%%INCLUDE_RHEL_FILES%%/$INCLUDE_RHEL_FILES/
s/%%PATCHLIST_CHANGELOG%%/$PATCHLIST_CHANGELOG/
- s/%%TARBALL_VERSION%%/$TARFILE_RELEASE/" "$SPECFILE"
+ s/%%TARBALL_VERSION%%/$TARFILE_RELEASE/" "$SOURCES/$SPECFILE"
echo "MARKER is $MARKER"
@@ -190,7 +165,7 @@ for opt in $BUILDOPTS; do
add_opt=
[ -z "${opt##+*}" ] && add_opt="_with_${opt#?}"
[ -z "${opt##-*}" ] && add_opt="_without_${opt#?}"
- [ -n "$add_opt" ] && sed -i "s/^\\(# The following build options\\)/%define $add_opt 1\\n\\1/" $SPECFILE
+ [ -n "$add_opt" ] && sed -i "s/^\\(# The following build options\\)/%define $add_opt 1\\n\\1/" "$SOURCES/$SPECFILE"
done
rm -f "$clogf"{,.rev,.stripped};
--
https://gitlab.com/cki-project/kernel-ark/-/merge_requests/1638
_______________________________________________
kernel mailing list -- kernel@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to kernel-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/kernel@xxxxxxxxxxxxxxxxxxxxxxx
Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
