From: Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx>
Hi,
As part of the ongoing rebase effort, the following configuration
options need to be reviewed.
As a reminder, the ARK configuration flow involves moving unreviewed
configuration options from the pending directory to the ark directory.
In the diff below, options are removed from the pending directory and
added to the ark hierarchy. The final options that need to be ACKed
are the files that are being added to the ark hierarchy.
If the value for a file that is added should be changed, please reply
with a better option.
CONFIG_TYPEC_QCOM_PMIC:
Driver for supporting role switch over the Qualcomm PMIC. This will
handle the USB Type-C role and orientation detection reported by the
QCOM PMIC if the PMIC has the capability to handle USB Type-C
detection.
It will also enable the VBUS output to connected devices when a
DFP connection is made.
Symbol: TYPEC_QCOM_PMIC [=n]
Type : tristate
Defined at drivers/usb/typec/Kconfig:88
Prompt: Qualcomm PMIC USB Type-C driver
Depends on: USB_SUPPORT [=y] && TYPEC [=y] && (ARCH_QCOM [=y] || COMPILE_TEST [=n])
Location:
-> Device Drivers
-> USB support (USB_SUPPORT [=y])
-> USB Type-C Support (TYPEC [=y])
---
CONFIG_TYPEC_STUSB160X:
Say Y or M here if your system has STMicroelectronics STUSB160x
Type-C port controller.
If you choose to build this driver as a dynamically linked module, the
module will be called stusb160x.ko.
Symbol: TYPEC_STUSB160X [=n]
Type : tristate
Defined at drivers/usb/typec/Kconfig:76
Prompt: STMicroelectronics STUSB160x Type-C controller driver
Depends on: USB_SUPPORT [=y] && TYPEC [=y] && I2C [=y] && REGMAP_I2C [=m] && (USB_ROLE_SWITCH [=m] || !USB_ROLE_SWITCH [=m])
Location:
-> Device Drivers
-> USB support (USB_SUPPORT [=y])
-> USB Type-C Support (TYPEC [=y])
---
CONFIG_TYPEC_TCPCI_MAXIM:
MAXIM TCPCI based Type-C/PD chip driver. Works with
with Type-C Port Controller Manager.
Symbol: TYPEC_TCPCI_MAXIM [=n]
Type : tristate
Defined at drivers/usb/typec/tcpm/Kconfig:38
Prompt: Maxim TCPCI based Type-C chip driver
Depends on: USB_SUPPORT [=y] && TYPEC [=y] && TYPEC_TCPM [=m] && TYPEC_TCPCI [=m]
Location:
-> Device Drivers
-> USB support (USB_SUPPORT [=y])
-> USB Type-C Support (TYPEC [=y])
-> USB Type-C Port Controller Manager (TYPEC_TCPM [=m])
-> Type-C Port Controller Interface driver (TYPEC_TCPCI [=m])
---
CONFIG_USB_FEW_INIT_RETRIES:
When a new USB device is detected, the kernel tries very hard
to initialize and enumerate it, with lots of nested retry loops.
This almost always works, but when it fails it can take a long time.
This option tells the kernel to make only a few retry attempts,
so that the total time required for a failed initialization is
no more than 30 seconds (as required by the USB OTG spec).
Say N here unless you require new-device enumeration failure to
occur within 30 seconds (as might be needed in an embedded
application).
Symbol: USB_FEW_INIT_RETRIES [=n]
Type : bool
Defined at drivers/usb/core/Kconfig:35
Prompt: Limit USB device initialization to only a few retries
Depends on: USB_SUPPORT [=y] && USB [=y]
Location:
-> Device Drivers
-> USB support (USB_SUPPORT [=y])
---
Cc: Torez Smith <torez@xxxxxxxxxx>
Cc: Don Zickus <dzickus@xxxxxxxxxx>
Signed-off-by: Fedora Kernel Team <kernel-team@xxxxxxxxxxxxxxxxx>
---
.../common/generic/CONFIG_TYPEC_QCOM_PMIC | 1 +
.../common/generic/CONFIG_TYPEC_STUSB160X | 1 +
.../common/generic/CONFIG_TYPEC_TCPCI_MAXIM | 1 +
.../generic/CONFIG_USB_FEW_INIT_RETRIES | 1 +
.../generic/CONFIG_TYPEC_QCOM_PMIC | 23 -----------------
.../generic/CONFIG_TYPEC_STUSB160X | 21 ----------------
.../generic/CONFIG_TYPEC_TCPCI_MAXIM | 20 ---------------
.../generic/CONFIG_USB_FEW_INIT_RETRIES | 25 -------------------
8 files changed, 4 insertions(+), 89 deletions(-)
create mode 100644 redhat/configs/common/generic/CONFIG_TYPEC_QCOM_PMIC
create mode 100644 redhat/configs/common/generic/CONFIG_TYPEC_STUSB160X
create mode 100644 redhat/configs/common/generic/CONFIG_TYPEC_TCPCI_MAXIM
create mode 100644 redhat/configs/common/generic/CONFIG_USB_FEW_INIT_RETRIES
delete mode 100644 redhat/configs/pending-common/generic/CONFIG_TYPEC_QCOM_PMIC
delete mode 100644 redhat/configs/pending-common/generic/CONFIG_TYPEC_STUSB160X
delete mode 100644 redhat/configs/pending-common/generic/CONFIG_TYPEC_TCPCI_MAXIM
delete mode 100644 redhat/configs/pending-common/generic/CONFIG_USB_FEW_INIT_RETRIES
diff --git a/redhat/configs/common/generic/CONFIG_TYPEC_QCOM_PMIC b/redhat/configs/common/generic/CONFIG_TYPEC_QCOM_PMIC
new file mode 100644
index 000000000000..b04c909a37fd
--- /dev/null
+++ b/redhat/configs/common/generic/CONFIG_TYPEC_QCOM_PMIC
@@ -0,0 +1 @@
+# CONFIG_TYPEC_QCOM_PMIC is not set
diff --git a/redhat/configs/common/generic/CONFIG_TYPEC_STUSB160X b/redhat/configs/common/generic/CONFIG_TYPEC_STUSB160X
new file mode 100644
index 000000000000..9c9373827da5
--- /dev/null
+++ b/redhat/configs/common/generic/CONFIG_TYPEC_STUSB160X
@@ -0,0 +1 @@
+# CONFIG_TYPEC_STUSB160X is not set
diff --git a/redhat/configs/common/generic/CONFIG_TYPEC_TCPCI_MAXIM b/redhat/configs/common/generic/CONFIG_TYPEC_TCPCI_MAXIM
new file mode 100644
index 000000000000..cb128a87c705
--- /dev/null
+++ b/redhat/configs/common/generic/CONFIG_TYPEC_TCPCI_MAXIM
@@ -0,0 +1 @@
+# CONFIG_TYPEC_TCPCI_MAXIM is not set
diff --git a/redhat/configs/common/generic/CONFIG_USB_FEW_INIT_RETRIES b/redhat/configs/common/generic/CONFIG_USB_FEW_INIT_RETRIES
new file mode 100644
index 000000000000..9d905e9cef4f
--- /dev/null
+++ b/redhat/configs/common/generic/CONFIG_USB_FEW_INIT_RETRIES
@@ -0,0 +1 @@
+# CONFIG_USB_FEW_INIT_RETRIES is not set
diff --git a/redhat/configs/pending-common/generic/CONFIG_TYPEC_QCOM_PMIC b/redhat/configs/pending-common/generic/CONFIG_TYPEC_QCOM_PMIC
deleted file mode 100644
index c6703e7df74d..000000000000
--- a/redhat/configs/pending-common/generic/CONFIG_TYPEC_QCOM_PMIC
+++ /dev/null
@@ -1,23 +0,0 @@
-# CONFIG_TYPEC_QCOM_PMIC:
-#
-# Driver for supporting role switch over the Qualcomm PMIC. This will
-# handle the USB Type-C role and orientation detection reported by the
-# QCOM PMIC if the PMIC has the capability to handle USB Type-C
-# detection.
-#
-# It will also enable the VBUS output to connected devices when a
-# DFP connection is made.
-#
-# Symbol: TYPEC_QCOM_PMIC [=n]
-# Type : tristate
-# Defined at drivers/usb/typec/Kconfig:88
-# Prompt: Qualcomm PMIC USB Type-C driver
-# Depends on: USB_SUPPORT [=y] && TYPEC [=y] && (ARCH_QCOM [=y] || COMPILE_TEST [=n])
-# Location:
-# -> Device Drivers
-# -> USB support (USB_SUPPORT [=y])
-# -> USB Type-C Support (TYPEC [=y])
-#
-#
-#
-# CONFIG_TYPEC_QCOM_PMIC is not set
diff --git a/redhat/configs/pending-common/generic/CONFIG_TYPEC_STUSB160X b/redhat/configs/pending-common/generic/CONFIG_TYPEC_STUSB160X
deleted file mode 100644
index f5aae2954b2b..000000000000
--- a/redhat/configs/pending-common/generic/CONFIG_TYPEC_STUSB160X
+++ /dev/null
@@ -1,21 +0,0 @@
-# CONFIG_TYPEC_STUSB160X:
-#
-# Say Y or M here if your system has STMicroelectronics STUSB160x
-# Type-C port controller.
-#
-# If you choose to build this driver as a dynamically linked module, the
-# module will be called stusb160x.ko.
-#
-# Symbol: TYPEC_STUSB160X [=n]
-# Type : tristate
-# Defined at drivers/usb/typec/Kconfig:76
-# Prompt: STMicroelectronics STUSB160x Type-C controller driver
-# Depends on: USB_SUPPORT [=y] && TYPEC [=y] && I2C [=y] && REGMAP_I2C [=m] && (USB_ROLE_SWITCH [=m] || !USB_ROLE_SWITCH [=m])
-# Location:
-# -> Device Drivers
-# -> USB support (USB_SUPPORT [=y])
-# -> USB Type-C Support (TYPEC [=y])
-#
-#
-#
-# CONFIG_TYPEC_STUSB160X is not set
diff --git a/redhat/configs/pending-common/generic/CONFIG_TYPEC_TCPCI_MAXIM b/redhat/configs/pending-common/generic/CONFIG_TYPEC_TCPCI_MAXIM
deleted file mode 100644
index 2750d892e7c0..000000000000
--- a/redhat/configs/pending-common/generic/CONFIG_TYPEC_TCPCI_MAXIM
+++ /dev/null
@@ -1,20 +0,0 @@
-# CONFIG_TYPEC_TCPCI_MAXIM:
-#
-# MAXIM TCPCI based Type-C/PD chip driver. Works with
-# with Type-C Port Controller Manager.
-#
-# Symbol: TYPEC_TCPCI_MAXIM [=n]
-# Type : tristate
-# Defined at drivers/usb/typec/tcpm/Kconfig:38
-# Prompt: Maxim TCPCI based Type-C chip driver
-# Depends on: USB_SUPPORT [=y] && TYPEC [=y] && TYPEC_TCPM [=m] && TYPEC_TCPCI [=m]
-# Location:
-# -> Device Drivers
-# -> USB support (USB_SUPPORT [=y])
-# -> USB Type-C Support (TYPEC [=y])
-# -> USB Type-C Port Controller Manager (TYPEC_TCPM [=m])
-# -> Type-C Port Controller Interface driver (TYPEC_TCPCI [=m])
-#
-#
-#
-# CONFIG_TYPEC_TCPCI_MAXIM is not set
diff --git a/redhat/configs/pending-common/generic/CONFIG_USB_FEW_INIT_RETRIES b/redhat/configs/pending-common/generic/CONFIG_USB_FEW_INIT_RETRIES
deleted file mode 100644
index 33144312ca44..000000000000
--- a/redhat/configs/pending-common/generic/CONFIG_USB_FEW_INIT_RETRIES
+++ /dev/null
@@ -1,25 +0,0 @@
-# CONFIG_USB_FEW_INIT_RETRIES:
-#
-# When a new USB device is detected, the kernel tries very hard
-# to initialize and enumerate it, with lots of nested retry loops.
-# This almost always works, but when it fails it can take a long time.
-# This option tells the kernel to make only a few retry attempts,
-# so that the total time required for a failed initialization is
-# no more than 30 seconds (as required by the USB OTG spec).
-#
-# Say N here unless you require new-device enumeration failure to
-# occur within 30 seconds (as might be needed in an embedded
-# application).
-#
-# Symbol: USB_FEW_INIT_RETRIES [=n]
-# Type : bool
-# Defined at drivers/usb/core/Kconfig:35
-# Prompt: Limit USB device initialization to only a few retries
-# Depends on: USB_SUPPORT [=y] && USB [=y]
-# Location:
-# -> Device Drivers
-# -> USB support (USB_SUPPORT [=y])
-#
-#
-#
-# CONFIG_USB_FEW_INIT_RETRIES is not set
--
GitLab
_______________________________________________
kernel mailing list -- kernel@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to kernel-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/kernel@xxxxxxxxxxxxxxxxxxxxxxx
