On Fri, Oct 02, 2020 at 01:19:07PM -0400, Don Zickus wrote:
> On Thu, Oct 01, 2020 at 12:44:27AM -0000, GitLab Bridge on behalf of bcrocker wrote:
> > From: Ben Crocker <bcrocker@xxxxxxxxxx>
> >
> > GIT ?= git
> >
> > and replace literal occurrences of 'git' with $(GIT).
> > This change enables us to override 'git' with, e.g., some
> > arbitrary shell script that prints additional information
> > and/or does additional processing before and/or after (or
> > even instead of) invoking /usr/bin/git.
>
> Acked-by: Don Zickus <dzickus@xxxxxxxxxx>
More useless noise. Sorry.
Acked-by: Don Zickus <dzickus@xxxxxxxxxx>
>
>
> >
> > Signed-off-by: Ben Crocker <bcrocker@xxxxxxxxxx>
> > ---
> > redhat/Makefile | 29 +++++++++++++++--------------
> > redhat/Makefile.common | 16 ++++++++--------
> > 2 files changed, 23 insertions(+), 22 deletions(-)
> >
> > diff --git a/redhat/Makefile b/redhat/Makefile
> > index 27d2cd94e78f..ee3702434e05 100644
> > --- a/redhat/Makefile
> > +++ b/redhat/Makefile
> > @@ -1,3 +1,4 @@
> > +GIT ?= git
> > include Makefile.common
> > include Makefile.rhpkg
> >
> > @@ -32,8 +33,8 @@ endif
> > BUILD_TARGET ?= --scratch $(BUILD_SCRATCH_TARGET)
> > FLAVOR =
> >
> > -RHGITURL?=$(shell git config rhg.url || git config remote.origin.url)
> > -RHGITCOMMIT?=$(shell git log -1 --pretty=format:%H)
> > +RHGITURL?=$(shell $(GIT) config rhg.url || $(GIT) config remote.origin.url)
> > +RHGITCOMMIT?=$(shell $(GIT) log -1 --pretty=format:%H)
> >
> > # this section is needed in order to make O= to work
> > _OUTPUT := ..
> > @@ -199,7 +200,7 @@ $(KABIDW_TARBALL):
> > dist-git-version-check:
> > @# genspec.sh uses pathspec magic that wasn't introduced until version 2.13
> > @IFS=" ."; \
> > - set -- $$(git --version); \
> > + set -- $$($(GIT) --version); \
> > IFS=; \
> > if [ "$$3" -lt 2 -o \( "$$3" -eq 2 -a "$$4" -lt 13 \) ]; then \
> > echo "ERROR: You need git version 2.13 or newer to run some setup commands"; \
> > @@ -219,7 +220,7 @@ setup-source: dist-git-version-check dist-clean-sources
> > sources-rh: $(TARBALL)
> > @cp -l $(TARBALL) $(SOURCES)/ || cp $(TARBALL) $(SOURCES)/
> > @touch $(TESTPATCH)
> > - @git diff --no-renames HEAD > $(TESTPATCH).tmp
> > + @$(GIT) diff --no-renames HEAD > $(TESTPATCH).tmp
> > @# 1) filterdiff will return crap from the patches it just filtered,
> > @# that's why egrep is needed so if there're changes under redhat/
> > @# but not everywhere else, it will be empty just like
> > @@ -265,7 +266,7 @@ sources-rh: $(TARBALL)
> > dist-sources: setup-source dist-configs-check dist-kabi dist-kabi-dup sources-rh
> >
> > dist-test-patch:
> > - @git diff --no-renames HEAD > $(TESTPATCH);
> > + @$(GIT) diff --no-renames HEAD > $(TESTPATCH);
> > @($(FILTERDIFF) $(TESTPATCH) | egrep -v "^index|^diff" >$(TESTPATCH).tmp; true)
> > @mv $(TESTPATCH).tmp $(TESTPATCH);
> >
> > @@ -300,34 +301,34 @@ dist-release-finish: setup-source
> > @cp $(SOURCES)/$(CHANGELOG) $(REDHAT)/$(CHANGELOG)
> > @echo $(MARKER) > $(REDHAT)/marker
> > @# if neither changelog nor marker was updated, skip bumping a release
> > - git diff-index --quiet HEAD && (echo "Nothing changed, skipping updates"; exit 0) || true
> > + $(GIT) diff-index --quiet HEAD && (echo "Nothing changed, skipping updates"; exit 0) || true
> > $(REDHAT)/scripts/new_release.sh $(REDHAT) $(__YSTREAM) $(__ZSTREAM); \
> > - git add $(REDHAT)/$(CHANGELOG); \
> > - git add $(REDHAT)/marker; \
> > - git commit -s ../Makefile.rhelver $(REDHAT)/marker $(REDHAT)/$(CHANGELOG) $(PACKAGE_NAME).spec.template -m "[redhat] $(PACKAGE_NAME)-$(STAMP_VERSION)-$(PREBUILD)$(BUILD)$(BUILDID)"; \
> > + $(GIT) add $(REDHAT)/$(CHANGELOG); \
> > + $(GIT) add $(REDHAT)/marker; \
> > + $(GIT) commit -s ../Makefile.rhelver $(REDHAT)/marker $(REDHAT)/$(CHANGELOG) $(PACKAGE_NAME).spec.template -m "[redhat] $(PACKAGE_NAME)-$(STAMP_VERSION)-$(PREBUILD)$(BUILD)$(BUILDID)"; \
> >
> > dist-release: dist-clean-sources
> > @$(MAKE) dist-release-finish
> > dist-release-tag:
> > - @git tag -a -m "$(PACKAGE_NAME)-$(STAMP_VERSION)-$(PKGRELEASE)" $(PACKAGE_NAME)-$(STAMP_VERSION)-$(PKGRELEASE)
> > + @$(GIT) tag -a -m "$(PACKAGE_NAME)-$(STAMP_VERSION)-$(PKGRELEASE)" $(PACKAGE_NAME)-$(STAMP_VERSION)-$(PKGRELEASE)
> >
> > git-tree-check:
> > - @if test -n "$(DIST_PUSH)" && test -z "$(shell git remote get-url gitlab 2>/dev/null)"; then \
> > + @if test -n "$(DIST_PUSH)" && test -z "$(shell $(GIT) remote get-url gitlab 2>/dev/null)"; then \
> > echo -e "Please run 'git remote add gitlab <url>' to enable git-push.\n"; \
> > exit 1; \
> > fi
> > - @git diff-index --quiet HEAD || \
> > + @$(GIT) diff-index --quiet HEAD || \
> > { echo -e "Dirty tree, please clean before merging.\n"; exit 1; }
> >
> > DIST_BRANCH ?= "os-build"
> > dist-merge-upstream: git-tree-check
> > - @if test "$(shell git branch --show-current)" != "$(DIST_BRANCH)"; then \
> > + @if test "$(shell $(GIT) branch --show-current)" != "$(DIST_BRANCH)"; then \
> > echo -e "Please checkout $(DIST_BRANCH) branch before merging.\n"; \
> > exit 1; \
> > fi;
> >
> > @# If TAG is empty, script defaults to master:HEAD
> > - git checkout $(DIST_BRANCH)
> > + $(GIT) checkout $(DIST_BRANCH)
> > @$(REDHAT)/scripts/ci/ark-update-configs.sh $(TAG)
> >
> > dist-merge-upstream-push: export DIST_PUSH="1"
> > diff --git a/redhat/Makefile.common b/redhat/Makefile.common
> > index b335f3c77c7d..80c3b8dfccd4 100644
> > --- a/redhat/Makefile.common
> > +++ b/redhat/Makefile.common
> > @@ -1,4 +1,4 @@
> > -TOPDIR:=$(shell git rev-parse --show-toplevel)
> > +TOPDIR:=$(shell $(GIT) rev-parse --show-toplevel)
> > REDHAT:=$(TOPDIR)/redhat
> > include $(TOPDIR)/Makefile.rhelver
> >
> > @@ -6,11 +6,11 @@ RPMBUILD := $(shell if [ -x "/usr/bin/rpmbuild" ]; then echo rpmbuild; \
> > else echo rpm; fi)
> >
> > MACH := $(shell uname -m)
> > -RPMKVERSION:=$(shell git show HEAD:Makefile | sed -ne '/^VERSION\ =\ /{s///;p;q}')
> > -RPMKPATCHLEVEL:=$(shell git show HEAD:Makefile | sed -ne '/^PATCHLEVEL\ =\ /{s///;p;q}')
> > -RPMKSUBLEVEL:=$(shell git show HEAD:Makefile | sed -ne '/^SUBLEVEL\ =\ /{s///;p;q}')
> > -RPMKEXTRAVERSION:=$(shell git show HEAD:Makefile | sed -ne '/^EXTRAVERSION\ =\ /{s///;p;q}')
> > -GITID:= $(shell git log --max-count=1 --pretty=format:%H)
> > +RPMKVERSION:=$(shell $(GIT) show HEAD:Makefile | sed -ne '/^VERSION\ =\ /{s///;p;q}')
> > +RPMKPATCHLEVEL:=$(shell $(GIT) show HEAD:Makefile | sed -ne '/^PATCHLEVEL\ =\ /{s///;p;q}')
> > +RPMKSUBLEVEL:=$(shell $(GIT) show HEAD:Makefile | sed -ne '/^SUBLEVEL\ =\ /{s///;p;q}')
> > +RPMKEXTRAVERSION:=$(shell $(GIT) show HEAD:Makefile | sed -ne '/^EXTRAVERSION\ =\ /{s///;p;q}')
> > +GITID:= $(shell $(GIT) log --max-count=1 --pretty=format:%H)
> > # marker is git tag which we base off of for exporting patches
> > # Make sure marker uses RPMKPATCHLEVEL and RPMKEXTRAVERSION from the kernel
> > # makefile as opposed to any adjusted version for snapshotting.
> > @@ -42,8 +42,8 @@ else
> > endif
> > ifeq ($(VERSION_ON_UPSTREAM),1)
> > # master is expected to track mainline.
> > - MERGE_BASE:=$(shell git merge-base HEAD master)
> > - _TAG:=$(shell git describe $(MERGE_BASE))
> > + MERGE_BASE:=$(shell $(GIT) merge-base HEAD master)
> > + _TAG:=$(shell $(GIT) describe $(MERGE_BASE))
> > # a snapshot off of a tagged git is of the form [tag]-[cnt]-g[hash]
> > SNAPSHOT:=$(shell echo $(_TAG) | grep -c '\-g')
> > else
> > --
> > GitLab
> > _______________________________________________
> > kernel mailing list -- kernel@xxxxxxxxxxxxxxxxxxxxxxx
> > To unsubscribe send an email to kernel-leave@xxxxxxxxxxxxxxxxxxxxxxx
> > Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> > List Archives: https://lists.fedoraproject.org/archives/list/kernel@xxxxxxxxxxxxxxxxxxxxxxx
_______________________________________________
kernel mailing list -- kernel@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to kernel-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/kernel@xxxxxxxxxxxxxxxxxxxxxxx
