From: Hans de Goede <hdegoede@xxxxxxxxxx>
Before commit cfc4c189bc70 ("pwm: Read initial hardware state at request
time"), a driver's get_state callback would get called once per PWM from
pwmchip_add().
pwm-lpss' runtime-pm code was relying on this, getting a runtime-pm ref for
PWMs which are enabled at probe time from within its get_state callback,
before enabling runtime-pm.
The change to calling get_state at request time causes a number of
problems:
1. PWMs enabled at probe time may get runtime suspended before they are
requested, causing e.g. a LCD backlight controlled by the PWM to turn off.
2. When the request happens when the PWM has been runtime suspended, the
ctrl register will read all 1 / 0xffffffff, causing get_state to store
bogus values in the pwm_state.
3. get_state was using an async pm_runtime_get() call, because it assumed
that runtime-pm has not been enabled yet. If shortly after the request an
apply call is made, then the pwm_lpss_is_updating() check may trigger
because the resume triggered by the pm_runtime_get() call is not complete
yet, so the ctrl register still reads all 1 / 0xffffffff.
This commit fixes these issues by moving the initial pm_runtime_get() call
for PWMs which are enabled at probe time to the pwm_lpss_probe() function;
and by making get_state take a runtime-pm ref before reading the ctrl reg.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1828927
Fixes: cfc4c189bc70 ("pwm: Read initial hardware state at request time")
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Upstream Status: https://lore.kernel.org/linux-acpi/5f15f6bc-8650-d86e-893f-0d41557c57c7@xxxxxxxxxx/
---
drivers/pwm/pwm-lpss.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
index 75bbfe5f3bc2..9d965ffe66d1 100644
--- a/drivers/pwm/pwm-lpss.c
+++ b/drivers/pwm/pwm-lpss.c
@@ -158,7 +158,6 @@ static int pwm_lpss_apply(struct pwm_chip *chip, struct pwm_device *pwm,
return 0;
}
-/* This function gets called once from pwmchip_add to get the initial state */
static void pwm_lpss_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_state *state)
{
@@ -167,6 +166,8 @@ static void pwm_lpss_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
unsigned long long base_unit, freq, on_time_div;
u32 ctrl;
+ pm_runtime_get_sync(chip->dev);
+
base_unit_range = BIT(lpwm->info->base_unit_bits);
ctrl = pwm_lpss_read(pwm);
@@ -187,8 +188,7 @@ static void pwm_lpss_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
state->polarity = PWM_POLARITY_NORMAL;
state->enabled = !!(ctrl & PWM_ENABLE);
- if (state->enabled)
- pm_runtime_get(chip->dev);
+ pm_runtime_put(chip->dev);
}
static const struct pwm_ops pwm_lpss_ops = {
@@ -202,7 +202,8 @@ struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
{
struct pwm_lpss_chip *lpwm;
unsigned long c;
- int ret;
+ int i, ret;
+ u32 ctrl;
if (WARN_ON(info->npwm > MAX_PWMS))
return ERR_PTR(-ENODEV);
@@ -232,6 +233,12 @@ struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
return ERR_PTR(ret);
}
+ for (i = 0; i < lpwm->info->npwm; i++) {
+ ctrl = pwm_lpss_read(&lpwm->chip.pwms[i]);
+ if (ctrl & PWM_ENABLE)
+ pm_runtime_get(dev);
+ }
+
return lpwm;
}
EXPORT_SYMBOL_GPL(pwm_lpss_probe);
--
2.26.2
_______________________________________________
kernel mailing list -- kernel@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to kernel-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/kernel@xxxxxxxxxxxxxxxxxxxxxxx
