On Thu, May 14, 2020 at 12:14 PM GitLab Bridge on behalf of prarit
<jcline@xxxxxxxxxx> wrote:
>
> From: Prarit Bhargava <prarit@xxxxxxxxxx>
>
> The distribution specific Makefile target names begin with rh-. Switch
> them to be use the distro agnostic dist-.
>
> rh-dist-git-test and rh-dist-git are renamed to dist-git-test and
> dist-git.
Acked-by: Justin M. Forbes <jforbes@xxxxxxxxxxxxxxxxx>
> Signed-off-by: Prarit Bhargava <prarit@xxxxxxxxxx>
>
> v2: Update to include jcline's newly added docs
> v3: Clean up rh-help and rh-full-help output. I made all text conform
> to 80 chars.
> ---
> makefile | 6 +-
> redhat/Makefile | 281 ++++++++++++------------
> redhat/Makefile.cross | 18 +-
> redhat/configs/README | 2 +-
> redhat/configs/editconfig | 2 +-
> redhat/configs/evaluate_configs | 2 +-
> redhat/docs/index.rst | 8 +-
> redhat/docs/maintaining.rst | 12 +-
> redhat/koji/Makefile | 2 +-
> redhat/koji/kernel.spec | 2 +-
> redhat/scripts/ci/ark-create-release.sh | 8 +-
> redhat/scripts/ci/ark-update-configs.sh | 4 +-
> redhat/scripts/configdiff.sh | 4 +-
> redhat/scripts/download_cross.sh | 2 +-
> 14 files changed, 182 insertions(+), 171 deletions(-)
>
> diff --git a/makefile b/makefile
> index 7dc9bcb3267e..819ac9a5cd60 100644
> --- a/makefile
> +++ b/makefile
> @@ -1,4 +1,4 @@
> -ifeq ($(filter rh-% rhg-%,$(MAKECMDGOALS)),)
> +ifeq ($(filter dist-% distg-%,$(MAKECMDGOALS)),)
> include Makefile
> endif
>
> @@ -8,9 +8,9 @@ ifeq ("$(origin O)", "command line")
> _OUTPUT := "$(abspath $(O))"
> _EXTRA_ARGS := O=$(_OUTPUT)
> endif
> -rh-%::
> +dist-%::
> $(MAKE) -C redhat $(@) $(_EXTRA_ARGS)
>
> -rhg-%::
> +distg-%::
> $(MAKE) -C redhat $(@) $(_EXTRA_ARGS)
>
> diff --git a/redhat/Makefile b/redhat/Makefile
> index 0118e5b9e2e9..1465469cab95 100644
> --- a/redhat/Makefile
> +++ b/redhat/Makefile
> @@ -57,9 +57,9 @@ KABIDW := $(REDHAT)/kabi-dwarf
>
> include Makefile.cross
>
> -default: rh-help
> +default: dist-help
>
> -rh-python-check:
> +dist-python-check:
> @if [ ! -f /usr/libexec/platform-python ]; then \
> if ! which python3 > /dev/null 2>&1; then \
> echo "ERROR: Python 3 is needed." ; \
> @@ -71,7 +71,7 @@ rh-python-check:
> exit 1; \
> fi
>
> -rh-kabi: rh-python-check
> +dist-kabi: dist-python-check
> @for KABIARCH in $(ARCH_LIST); do \
> $(REDHAT)/kabi/show-kabi -k $(REDHAT)/kabi/kabi-module/ -m \
> -a $$KABIARCH -r $(RHEL_MAJOR).$(RHEL_MINOR) > $(REDHAT)/kabi/Module.kabi_$$KABIARCH;\
> @@ -83,7 +83,7 @@ rh-kabi: rh-python-check
> done;
> @(cd $(REDHAT)/kabi/ && ln -Tsf kabi-rhel$(RHEL_MAJOR)$(RHEL_MINOR) kabi-current)
>
> -rh-kabi-dup: rh-python-check
> +dist-kabi-dup: dist-python-check
> @for KABIARCH in $(ARCH_LIST); do \
> touch $(REDHAT)/kabi/Module.kabi_dup_$$KABIARCH;\
> if [ -d $(REDHAT)/kabi/kabi-dup-module/kabi_$$KABIARCH ]; then \
> @@ -93,7 +93,7 @@ rh-kabi-dup: rh-python-check
> fi \
> done;
>
> -rh-check-kabi: rh-kabi
> +dist-check-kabi: dist-kabi
> @if [ ! -e $(_OUTPUT)/Module.symvers ]; then \
> echo "ERROR: You must compile the kernel and modules first";\
> exit 1;\
> @@ -101,7 +101,7 @@ rh-check-kabi: rh-kabi
> @$(REDHAT)/kabi/check-kabi -k $(REDHAT)/kabi/Module.kabi_$(MACH) \
> -s $(_OUTPUT)/Module.symvers
>
> -rh-check-kabi-dup: rh-kabi-dup
> +dist-check-kabi-dup: dist-kabi-dup
> @if [ ! -e $(_OUTPUT)/Module.symvers ]; then \
> echo "ERROR: You must compile the kernel and modules first";\
> exit 1;\
> @@ -109,18 +109,18 @@ rh-check-kabi-dup: rh-kabi-dup
> @$(REDHAT)/kabi/check-kabi -k $(REDHAT)/kabi/Module.kabi_dup_$(MACH) \
> -s $(_OUTPUT)/Module.symvers
>
> -rh-kabi-dw-base: rh-kabi
> +dist-kabi-dw-base: dist-kabi
> @echo "Generating baseline dataset for KABI DWARF-based comparison..."
> @echo "**** GENERATING DWARF-based kABI baseline dataset ****"
> @$(KABIDW)/run_kabi-dw.sh generate \
> $(REDHAT)/kabi/kabi-current/kabi_whitelist_$(CURARCH) \
> $(_OUTPUT) $(KABIDW)/base/$(CURARCH)/
>
> -rh-kabi-dw-check: rh-kabi
> +dist-kabi-dw-check: dist-kabi
> @if [ ! -d $(KABIDW)/base/$(CURARCH) ]; then \
> echo "**** ERROR: ****"; \
> echo "Comparison base not found in $(KABIDW)/base/$(CURARCH)."; \
> - echo "Please run \"make rh-kabi-dw-base\" first!"; \
> + echo "Please run \"make dist-kabi-dw-base\" first!"; \
> exit 1; \
> fi
> @echo "**** GENERATING DWARF-based kABI dataset ****"
> @@ -133,42 +133,42 @@ rh-kabi-dw-check: rh-kabi
> @echo "**** End of KABI DWARF-based comparison report ****"
> @rm -rf $(KABIDW)/base/$(CURARCH).tmp
>
> -rh-configs-commit: rh-configs-prep
> +dist-configs-commit: dist-configs-prep
> @cd $(REDHAT)/configs; VERSION=$(KVERSION) ./generate_all_configs.sh $(FLAVOR) 1; \
> ./process_configs.sh -z $(PACKAGE_NAME) $(KVERSION) "" $(FLAVOR)
>
> -rh-configs: rh-configs-prep
> +dist-configs: dist-configs-prep
> @cd $(REDHAT)/configs; VERSION=$(KVERSION) ./generate_all_configs.sh rhel 1; \
> ./process_configs.sh $(PROCESS_CONFIGS_OPTS) $(PACKAGE_NAME) $(KVERSION)
>
> -rh-configs-check: rh-configs-prep
> +dist-configs-check: dist-configs-prep
> cd $(REDHAT)/configs; ./process_configs.sh $(PROCESS_CONFIGS_CHECK_OPTS) $(PACKAGE_NAME)
>
> -rh-configs-prep: rh-clean-configs
> +dist-configs-prep: dist-clean-configs
> cd $(REDHAT)/configs; TARGET=$(DIST_TARGET) ./build_configs.sh $(PACKAGE_NAME) $(ARCH_MACH)
>
> -rh-configs-arch: ARCH_MACH = $(MACH)
> -rh-configs-arch: rh-configs
> +dist-configs-arch: ARCH_MACH = $(MACH)
> +dist-configs-arch: dist-configs
>
> -rh-clean-configs:
> +dist-clean-configs:
> cd $(REDHAT)/configs; rm -f kernel-*.config \
> kernel-*.config.orig \
> kernel-*.config.tmp
>
> -rh-clean-sources:
> +dist-clean-sources:
> @rm -f $(RPM)/SPECS/*
> @for i in $(SOURCES)/*; do \
> rm -f $$i; \
> done;
>
> -rh-clean-rpmdirs:
> +dist-clean-rpmdirs:
> @for i in $(RPM)/{BUILD,SRPMS,RPMS,SPECS}/*; do \
> rm -rf $$i; \
> done;
>
> -rh-clean: rh-clean-sources rh-clean-configs rh-clean-rpmdirs
> +dist-clean: dist-clean-sources dist-clean-configs dist-clean-rpmdirs
>
> -rh-stub-key:
> +dist-stub-key:
> @echo "Copying pre-generated keys";
> @echo "*** THIS IS NOT RECOMMENDED ***";
> @echo "To be safe, keys should be created once for every build";
> @@ -197,7 +197,7 @@ $(KABIDW_TARBALL):
> @(cd kabi-dwarf && tar cjvf $(SOURCES)/$(KABIDW_TARFILE) base run_kabi-dw.sh)
>
>
> -rh-git-version-check:
> +dist-git-version-check:
> @# genspec.sh uses pathspec magic that wasn't introduced until version 2.13
> @IFS=" ."; \
> set -- $$(git --version); \
> @@ -207,7 +207,7 @@ rh-git-version-check:
> exit 1; \
> fi
>
> -setup-source: rh-git-version-check rh-clean-sources
> +setup-source: dist-git-version-check dist-clean-sources
> @cp $(REDHAT)/$(SPECFILE).template $(SOURCES)/$(SPECFILE)
> @if [ ! -e $(REDHAT)/$(CHANGELOG) ]; then \
> echo "Creating $(CHANGELOG) as copy of $(CHANGELOG_PREV)"; \
> @@ -230,7 +230,7 @@ sources-rh: $(TARBALL)
> @($(FILTERDIFF) $(TESTPATCH).tmp | egrep -v "^index|^diff" >$(TESTPATCH).tmp2; true)
> @mv $(TESTPATCH).tmp2 $(TESTPATCH).tmp
> @diff $(TESTPATCH).tmp $(TESTPATCH) > /dev/null || \
> - echo "WARNING: There are uncommitted changes in your tree or the changes are not in sync with linux-kernel-test.patch. Either commit the changes or run 'make rh-test-patch'"
> + echo "WARNING: There are uncommitted changes in your tree or the changes are not in sync with linux-kernel-test.patch. Either commit the changes or run 'make dist-test-patch'"
> @rm $(TESTPATCH).tmp
> @cp $(TESTPATCH) $(SOURCES)/linux-kernel-test.patch
> @cp fedora_files/* $(SOURCES);
> @@ -262,197 +262,208 @@ sources-rh: $(TARBALL)
> fi
> @(cd kabi-dwarf && tar cjvf $(SOURCES)/$(KABIDW_TARFILE) base run_kabi-dw.sh)
>
> -rh-sources: setup-source rh-configs-check rh-kabi rh-kabi-dup sources-rh
> +dist-sources: setup-source dist-configs-check dist-kabi dist-kabi-dup sources-rh
>
> -rh-test-patch:
> +dist-test-patch:
> @git diff --no-renames HEAD > $(TESTPATCH);
> @($(FILTERDIFF) $(TESTPATCH) | egrep -v "^index|^diff" >$(TESTPATCH).tmp; true)
> @mv $(TESTPATCH).tmp $(TESTPATCH);
>
> -rh-all-rpms: rh-sources
> +dist-all-rpms: dist-sources
> $(RPMBUILD) --define "_sourcedir $(SOURCES)" --define "_builddir $(RPM)/BUILD" --define "_srcrpmdir $(RPM)/SRPMS" --define "_rpmdir $(RPM)/RPMS" --define "_specdir $(RPM)/SPECS" --define "dist $(DIST)" --target $(MACH) -ba $(RPM)/SOURCES/$(PACKAGE_NAME).spec
>
> -rh-srpm: rh-sources
> +dist-srpm: dist-sources
> $(RPMBUILD) --define "_sourcedir $(SOURCES)" --define "_builddir $(RPM)/BUILD" --define "_srcrpmdir $(RPM)/SRPMS" --define "_rpmdir $(RPM)/RPMS" --define "_specdir $(RPM)/SPECS" --define "dist $(DIST)" --nodeps -bs $(RPM)/SOURCES/$(PACKAGE_NAME).spec
>
> -rh-srpm-gcov:
> - make rh-sources BUILDID=".gcov" BUILDOPTS="+gcov"
> +dist-srpm-gcov:
> + make dist-sources BUILDID=".gcov" BUILDOPTS="+gcov"
> $(RPMBUILD) --define "_sourcedir $(SOURCES)" --define "_builddir $(RPM)/BUILD" --define "_srcrpmdir $(RPM)/SRPMS" --define "_rpmdir $(RPM)/RPMS" --define "_specdir $(RPM)/SPECS" --define "dist $(DIST)" --nodeps -bs $(RPM)/SOURCES/$(PACKAGE_NAME).spec
>
> -rh-rpms: rh-sources
> +dist-rpms: dist-sources
> $(RPMBUILD) --define "_sourcedir $(SOURCES)" --define "_builddir $(RPM)/BUILD" --define "_srcrpmdir $(RPM)/SRPMS" --define "_rpmdir $(RPM)/RPMS" --define "_specdir $(RPM)/SPECS" --define "dist $(DIST)" --target $(MACH) -bb $(RPM)/SOURCES/$(PACKAGE_NAME).spec
>
> -rh-kernel-%: rh-sources
> +dist-kernel-%: dist-sources
> $(RPMBUILD) --define "_sourcedir $(SOURCES)" --define "_builddir $(RPM)/BUILD" --define "_srcrpmdir $(RPM)/SRPMS" --define "_rpmdir $(RPM)/RPMS" --define "_specdir $(RPM)/SPECS" --define "dist $(DIST)" --target $(MACH) --with $* --without vdso_install --without perf --without tools -bb $(RPM)/SOURCES/$(PACKAGE_NAME).spec
>
> -rh-prep: rh-sources
> +dist-prep: dist-sources
> $(RPMBUILD) --define "_sourcedir $(SOURCES)" --define "_builddir $(RPM)/BUILD" --define "_srcrpmdir $(RPM)/SRPMS" --define "_rpmdir $(RPM)/RPMS" --define "_specdir $(RPM)/SPECS" --define "dist $(DIST)" --nodeps --target noarch -bp $(RPM)/SOURCES/$(PACKAGE_NAME).spec
>
> -rh-perf: rh-sources
> +dist-perf: dist-sources
> $(RPMBUILD) --define "_sourcedir $(SOURCES)" --define "_builddir $(RPM)/BUILD" --define "_srcrpmdir $(RPM)/SRPMS" --define "_rpmdir $(RPM)/RPMS" --define "_specdir $(RPM)/SPECS" --define "dist $(DIST)" --without up --without smp --without zfcpdump --without debug --without doc --without headers --without --without doc --without debuginfo --target $(MACH) -bb $(RPM)/SOURCES/$(PACKAGE_NAME).spec
>
> -rh-rpm-baseonly: rh-sources
> +dist-rpm-baseonly: dist-sources
> $(RPMBUILD) --define "_sourcedir $(SOURCES)" --define "_builddir $(RPM)/BUILD" --define "_srcrpmdir $(RPM)/SRPMS" --define "_rpmdir $(RPM)/RPMS" --define "_specdir $(RPM)/SPECS" --define "dist $(DIST)" --target $(MACH) --without debug --without debuginfo --without vdso_install --without bpftool --without perf --without tools -bb $(RPM)/SOURCES/$(PACKAGE_NAME).spec
>
>
> # unless you know what you're doing, you don't want to use the next three ones
> -rh-release-finish: setup-source
> +dist-release-finish: setup-source
> @cp $(SOURCES)/$(CHANGELOG) $(REDHAT)/$(CHANGELOG)
> @git add $(REDHAT)/$(CHANGELOG)
> @echo $(MARKER) > $(REDHAT)/marker
> @git add $(REDHAT)/marker
> @git commit -s ../Makefile.rhelver $(REDHAT)/marker $(REDHAT)/$(CHANGELOG) $(PACKAGE_NAME).spec.template -m "[redhat] $(PACKAGE_NAME)-$(STAMP_VERSION)-$(PREBUILD)$(BUILD)$(BUILDID)"
> - @$(MAKE) rh-configs
> - @$(MAKE) rh-kabi
> - @$(MAKE) rh-kabi-dup
> + @$(MAKE) dist-configs
> + @$(MAKE) dist-kabi
> + @$(MAKE) dist-kabi-dup
> @$(MAKE) sources-rh
> -rh-release: rh-clean-sources
> +dist-release: dist-clean-sources
> @$(REDHAT)/scripts/new_release.sh $(REDHAT) $(__YSTREAM) $(__ZSTREAM)
> - @$(MAKE) rh-release-finish
> -rh-release-tag:
> + @$(MAKE) dist-release-finish
> +dist-release-tag:
> @git tag -a -m "$(PACKAGE_NAME)-$(STAMP_VERSION)-$(PKGRELEASE)" $(PACKAGE_NAME)-$(STAMP_VERSION)-$(PKGRELEASE)
>
> -.PHONY: rh-brew rh-koji
> -rh-brew : BUILD_FLAGS ?= $(BREW_FLAGS) $(TEST_FLAGS)
> -rh-koji : BUILD_FLAGS ?= $(KOJI_FLAGS) $(TEST_FLAGS)
> -rhg-brew: BUILD_FLAGS ?= $(BREW_FLAGS) $(TEST_FLAGS)
> -rhg-koji: BUILD_FLAGS ?= $(KOJI_FLAGS) $(TEST_FLAGS)
> +.PHONY: dist-brew dist-koji
> +dist-brew : BUILD_FLAGS ?= $(BREW_FLAGS) $(TEST_FLAGS)
> +dist-koji : BUILD_FLAGS ?= $(KOJI_FLAGS) $(TEST_FLAGS)
> +distg-brew: BUILD_FLAGS ?= $(BREW_FLAGS) $(TEST_FLAGS)
> +distg-koji: BUILD_FLAGS ?= $(KOJI_FLAGS) $(TEST_FLAGS)
>
> -rh-brew rh-koji: rh-%: rh-srpm
> +dist-brew dist-koji: dist-%: dist-srpm
> $* build $(BUILD_FLAGS) $(BUILD_TARGET) $(SRPMS)/$(PACKAGE_NAME)-$(KVERSION)-$(PKGRELEASE)$(DIST).src.rpm $(OUTPUT_FILE)
>
> -rhg-brew rhg-koji: rhg-%:
> +distg-brew distg-koji: distg-%:
> $* build $(BUILD_FLAGS) $(BUILD_TARGET) "$(RHGITURL)?redhat/koji#$(RHGITCOMMIT)"
>
> .PHONY: $(REDHAT)/rpm/SOURCES/$(PACKAGE_NAME).spec
> $(REDHAT)/rpm/SOURCES/$(PACKAGE_NAME).spec:
> - @echo "rh-sources"
> - @$(MAKE) rh-sources
> + @echo "dist-sources"
> + @$(MAKE) dist-sources
>
> -rh-dist-git-test: export RH_DIST_GIT_TEST="1"
> -rh-dist-git-test: rh-dist-git
> +dist-git-test: export RH_DIST_GIT_TEST="1"
> +dist-git-test: dist-git
>
> -rh-dist-git: rh-srpm $(TARBALL) $(KABI_TARBALL) $(KABIDW_TARBALL)
> +dist-git: dist-srpm $(TARBALL) $(KABI_TARBALL) $(KABIDW_TARBALL)
> ifeq ("$(RHDISTGIT_BRANCH)", "")
> $(error RHDISTGIT_BRANCH unset)
> endif
> $(REDHAT)/scripts/rh-dist-git.sh "$(RHDISTGIT_BRANCH)" "$(RHDISTGIT_CACHE)" "$(RHDISTGIT_TMP)" "$(RHDISTGIT)" "$(TARBALL)" "$(KABI_TARBALL)" "$(KABIDW_TARBALL)" "$(__ZSTREAM)" "$(PACKAGE_NAME)" "$(RHEL_MAJOR)" "$(RHPKG_BIN)" "$(SRPMS)/$(PACKAGE_NAME)-$(KVERSION)-$(PKGRELEASE)$(DIST).src.rpm"
>
> -rh-rtg: rh-release
> - @$(MAKE) rh-release-tag
> - @$(MAKE) rh-dist-git
> +dist-rtg: dist-release
> + @$(MAKE) dist-release-tag
> + @$(MAKE) dist-git
>
> # RH_LATEST returns the value of the latest "known good" kernel from brew.
> # This should not be confused with the latest top-of-tree development tag.
> -rh-get-latest:
> +dist-get-latest:
> $(eval RH_LATEST:=$(shell brew latest-pkg --quiet rhel-${RHEL_MAJOR}.${RHEL_MINOR}.0-candidate kernel | awk ' { print $$1 } '))
> @echo "The latest kernel package tag is ${RH_LATEST}."
>
> -rh-os-version:
> +dist-os-version:
> @echo "OSVERSION: $(RHEL_MAJOR).$(RHEL_MINOR)"
>
> -rh-help:
> +dist-help:
> @echo 'Cleaning targets:'
> - @echo ' rh-clean - Clean redhat/configs/ and redhat/rpm/ directories.'
> + @echo ' dist-clean - Clean redhat/configs/ and redhat/rpm/ directories.'
> @echo ''
> @echo 'Building targets:'
> - @echo ' rh-srpm - Create a source RPM.'
> - @echo ' rh-all-rpms - Create a source RPM and build binary RPMs locally.'
> - @echo ' rh-brew - Create a source RPM and call brew to build binary RPMs.'
> - @echo ' rhg-brew - Build RPMs using a remote git repo. [Configuration needed.]'
> - @echo ' rh-cross-all-rpms - Build RPMs for all supported archs using a cross compiler.'
> + @echo ' dist-srpm - Create a source RPM.'
> + @echo ' dist-all-rpms - Create a source RPM and build binary RPMs locally.'
> + @echo ' dist-brew - Create a source RPM and call brew to build binary RPMs.'
> + @echo ' distg-brew - Build RPMs using a remote git repo.'
> + @echo ' [Configuration needed.]'
> + @echo ' dist-cross-all-rpms - Build RPMs for all supported archs using a cross'
> + @echo ' compiler.'
> @echo ''
> @echo 'Configuration targets:'
> - @echo ' rh-configs - Create RHEL config files in redhat/config/.'
> + @echo ' dist-configs - Create RHEL config files in redhat/config/.'
> @echo ''
> - @echo 'For detailed description and full list of targets, run `make rh-full-help`.'
> + @echo 'For detailed description and full list of targets, run `make dist-full-help`.'
> @echo ''
>
> -rh-full-help:
> +dist-full-help:
> @echo 'Cleaning targets:'
> - @echo ' rh-clean - Do rh-clean-sources, rh-clean-configs, & rh-clean-rpmdirs.'
> - @echo ' rh-clean-sources - Clean the redhat/rpm/SOURCES/ directory.'
> - @echo ' rh-clean-configs - Clean the redhat/configs/ directory.'
> - @echo ' rh-clean-rpmdirs - Clean the redhat/rpm/{BUILD,SRPMS,RPMS,SPECS}/ directories.'
> + @echo ' dist-clean - Do dist-clean-sources, dist-clean-configs, &'
> + @echo ' dist-clean-rpmdirs.'
> + @echo ' dist-clean-sources - Clean the redhat/rpm/SOURCES/ directory.'
> + @echo ' dist-clean-configs - Clean the redhat/configs/ directory.'
> + @echo ' dist-clean-rpmdirs - Clean the redhat/rpm/{BUILD,SRPMS,RPMS,SPECS}/'
> + @echo ' directories.'
> @echo ''
> @echo 'Building targets:'
> @echo ' All RPM/SRPM files will be put under the redhat/rpm/ directory.'
> @echo ''
> - @echo ' rh-srpm - Create a source RPM and put it into the redhat/rpm/SRPMS/ directory.'
> - @echo ' See the rh-brew target for available options.'
> - @echo ' rh-srpm-gcov - Create a source RPM with gcov enabled and put it into the'
> - @echo ' redhat/rpm/SRPMS/ directory.'
> - @echo ' rh-brew - Create a kernel SRPM and then call brew to build the created SRPM.'
> - @echo ' Add BUILDOPTS="+<opt> -<opt> [...]" to enable/disable build options.'
> - @echo ' Available <opt>s and their default values:' \
> + @echo ' dist-srpm - Create a source RPM and put it into the redhat/rpm/SRPMS/'
> + @echo ' directory. See the dist-brew target for available options.'
> + @echo ' dist-srpm-gcov - Create a source RPM with gcov enabled and put it into the'
> + @echo ' redhat/rpm/SRPMS/ directory.'
> + @echo ' dist-brew - Create a kernel SRPM and then call brew to build the'
> + @echo ' created SRPM. Add BUILDOPTS="+<opt> -<opt> [...]" to'
> + @echo ' enable/disable build options.'
> + @echo ' Available <opt>s and their default values:' \
> $$(sed -n -e 's/^%define with_\([^ \t]*\).*\?_without_.*/+\1/p' \
> -e 's/^%define with_\([^ \t]*\).*\?_with_.*/-\1/p' kernel.spec.template | \
> - grep -v 'only$$') | fmt -90
> - @echo ' rh-koji - Create a kernel SRPM and then call koji to build the created SRPM.'
> - @echo ' See the rh-brew target for available options.'
> - @echo ' rhg-brew - Pass HEAD of the current git branch to brew to build an RPM set.'
> - @echo ' Do not forget to push to the remote repository first.'
> - @echo ' Preceed make command by RHGITCOMMIT=<commitID> to specify commit ID'
> - @echo ' to use.'
> - @echo ' To set the remote repo, invoke: git config rhg.url git://<repo_path>'
> - @echo ' rhg-koji - Pass HEAD of the current git branch to koji to build an RPM set.'
> - @echo ' Do not forget to push to the remote repository first.'
> - @echo ' See the rhg-brew target for options and configuration.'
> - @echo ' rh-rpms - Create the binary RPMS for the kernel.'
> - @echo ' See the rh-brew target for available options.'
> - @echo ' rh-rpm-baseonly - Create the binary RPMS for the kernel and modules only (no'
> - @echo ' userspace tools or debuginfo).'
> - @echo ' rh-kernel-<type> - Create binary RPMS for a particular kernel type.'
> - @echo ' Available <type>s:'\
> + grep -v 'only$$') | fmt -80
> + @echo ' dist-koji - Create a kernel SRPM and then call koji to build the'
> + @echo ' created SRPM. See the dist-brew target for available'
> + @echo ' options.'
> + @echo ' distg-brew - Pass HEAD of the current git branch to brew to build an'
> + @echo ' RPM set. Do not forget to push to the remote repository'
> + @echo ' first. Preceed make command by RHGITCOMMIT=<commitID>'
> + @echo ' specify commit ID to use.'
> + @echo ' To set the remote repo, invoke:'
> + @echo ' git config rhg.url git://<repo_path>'
> + @echo ' distg-koji - Pass HEAD of the current git branch to koji to build an'
> + @echo ' RPM set. Do not forget to push to the remote repository'
> + @echo ' first. See the distg-brew target for options and'
> + @echo ' configuration.'
> + @echo ' dist-rpms - Create the binary RPMS for the kernel.'
> + @echo ' See the dist-brew target for available options.'
> + @echo ' dist-rpm-baseonly - Create the binary RPMS for the kernel and modules'
> + @echo ' (no userspace tools or debuginfo).'
> + @echo ' dist-kernel-<type> - Create binary RPMS for a particular kernel type.'
> + @echo ' Available <type>s:'\
> $$(sed -n 's/^%define with_\([^ ]*only\).*/\1/p' kernel.spec.template)
>
> - @echo ' rh-all-rpms - Create the binary RPMS and the SRPM for the kernel.'
> - @echo ' See the rh-brew target for available options.'
> - @echo ' rh-prep - Setup the redhat/rpm/BUILD/ directory with the kernel source.'
> - @echo ' See the rh-brew target for available options.'
> - @echo ' rh-test-patch - Create a diff against HEAD and put it in linux-kernel-test.patch.'
> - @echo ' Then linux-kernel-test.patch will be added to the kernel build.'
> - @echo ' rh-stub-key - Use pre generated keys to speed local test builds.'
> - @echo ' rh-cross-download - [x86_64 only] download cross compiler rpms.'
> - @echo ' rh-cross-all-builds - [x86_64 only] execute "rpmbuild -bc" for all supported'
> - @echo ' archs using RHEL cross compiler.'
> - @echo ' rh-cross-<arch>-build - [x86_64 only] execute "rpmbuild -bc" for specified'
> - @echo ' <arch> using RHEL cross compiler.'
> - @echo ' Supported <arch>s: x86_64'\
> + @echo ' dist-all-rpms - Create the binary RPMS and the SRPM for the kernel.'
> + @echo ' See the dist-brew target for available options.'
> + @echo ' dist-prep - Setup the redhat/rpm/BUILD/ directory with the kernel'
> + @echo ' source. See the dist-brew target for available options.'
> + @echo ' dist-test-patch - Create a diff against HEAD and put it in'
> + @echo ' linux-kernel-test.patch. This patch will'
> + @echo ' be added to the kernel build.'
> + @echo ' dist-stub-key - Use pre generated keys to speed local test builds.'
> + @echo ' dist-cross-download - [x86_64 only] download cross compiler rpms.'
> + @echo ' dist-cross-all-builds - [x86_64 only] execute "rpmbuild -bc" for all'
> + @echo ' supported archs using RHEL cross compiler.'
> + @echo ' dist-cross-<arch>-build - [x86_64 only] execute "rpmbuild -bc" for specified'
> + @echo ' <arch> using RHEL cross compiler.'
> + @echo ' Supported <arch>s: x86_64'\
> $$(sed -n 's/.*--target \([^ ]*\).*/\1/p' Makefile.cross | sort -u)
> - @echo ' rh-cross-all-rpms - [x86_64 only] execute rpm builds for all supported'
> - @echo ' archs using RHEL cross compiler.'
> - @echo ' rh-cross-<arch>-rpm - [x86_64 only] execute rpm builds for specified'
> - @echo ' <arch> using RHEL cross compiler.'
> - @echo ' See rh-cross-<arch>-build for the supported archs.'
> + @echo ' dist-cross-all-rpms - [x86_64 only] execute rpm builds for all supported'
> + @echo ' archs using RHEL cross compiler.'
> + @echo ' dist-cross-<arch>-rpm - [x86_64 only] execute rpm builds for specified'
> + @echo ' <arch> using RHEL cross compiler.'
> + @echo ' See dist-cross-<arch>-build for the supported archs.'
>
> @echo ''
> @echo 'kABI targets:'
> - @echo ' rh-kabi - Create kABI whitelist files in redhat/kabi/kabi-rhel*/ and'
> - @echo ' merge kABI checksums into redhat/kabi/Module.kabi_*.'
> - @echo ' rh-kabi-dup - Merge kABI checksums for Driver Update Program (DUP) whitelist'
> - @echo ' into redhat/kabi/Module.kabi_dup_*.'
> - @echo ' rh-check-kabi - Check for changes in kABI whitelisted symbols.'
> - @echo ' Requires a pre-compiled tree: run `make rh-configs`, copy the'
> - @echo ' relevant config file from redhat/configs/ to .config, run `make`.'
> - @echo ' rh-check-kabi-dup - Like rh-check-kabi but uses a DUP kABI whitelist.'
> - @echo ' rh-kabi-dw-base - Generate the base dataset for kABI DWARF-based check.'
> - @echo ' rh-kabi-dw-check - Run DWARF-based kABI comparison of current binaries with the base'
> - @echo ' dataset.'
> + @echo ' dist-kabi - Create kABI whitelist files in redhat/kabi/kabi-rhel*/'
> + @echo ' and merge kABI checksums into redhat/kabi/Module.kabi_*.'
> + @echo ' dist-kabi-dup - Merge kABI checksums for Driver Update Program (DUP)'
> + @echo ' into redhat/kabi/Module.kabi_dup_*.'
> + @echo ' dist-check-kabi - Check for changes in kABI whitelisted symbols.'
> + @echo ' Requires a pre-compiled tree: run `make dist-configs`,'
> + @echo ' copy the relevant config file from redhat/configs/ to'
> + @echo ' .config, and run `make`.'
> + @echo ' dist-check-kabi-dup - Like dist-check-kabi but uses a DUP kABI whitelist.'
> + @echo ' dist-kabi-dw-base - Generate the base dataset for kABI DWARF-based check.'
> + @echo ' dist-kabi-dw-check - Run DWARF-based kABI comparison of current binaries'
> + @echo ' with the base dataset.'
>
> @echo ''
> @echo 'Configuration targets:'
> - @echo ' rh-configs - Creates config files for RHEL $(RHEL_MAJOR) architectures, cleans them'
> - @echo ' by running make nonint_oldconfig, and copies them to'
> - @echo ' redhat/configs/ directory. This is the target to use for a config!'
> - @echo ' Copy the config file you want from the redhat/configs/ directory'
> - @echo ' to .config.'
> - @echo ' rh-configs-arch - Same as rh-configs but for single architecture only.'
> + @echo ' dist-configs - Creates config files for RHEL $(RHEL_MAJOR) architectures,'
> + @echo ' cleans them by running make nonint_oldconfig, and copies'
> + @echo ' them to redhat/configs/ directory. This is the target to use'
> + @echo ' for a config! Copy the config file you want from the'
> + @echo ' redhat/configs/ directory to .config'
> + @echo ' dist-configs-arch - Same as dist-configs but for single architecture only.'
>
> @echo ''
> @echo 'Misc targets:'
> - @echo ' rh-get-latest - Returns the latest "known good" kernel from brew. This should not'
> - @echo ' be confused with the latest top-of-tree development tag.'
> - @echo ' rh-os-version - Displays the current Red Hat Enterprise Linux version target used'
> - @echo ' by the current branch/tree.'
> + @echo ' dist-get-latest - Returns the latest "known good" kernel from brew. This'
> + @echo ' should not be confused with the latest top-of-tree'
> + @echo ' development tag.'
> + @echo ' dist-os-version - Displays the current Red Hat Enterprise Linux versioni'
> + @echo ' target used by the current branch/tree.'
> @echo ''
> diff --git a/redhat/Makefile.cross b/redhat/Makefile.cross
> index b50d8fa4af3a..3a22d83670d3 100644
> --- a/redhat/Makefile.cross
> +++ b/redhat/Makefile.cross
> @@ -16,7 +16,7 @@ CROSS_PACKAGE_LIST += binutils-powerpc64-linux-gnu gcc-powerpc64-linux-gnu
> CROSS_PACKAGE_LIST += binutils-s390x-linux-gnu gcc-s390x-linux-gnu
> endif
>
> -rh-cross-download:
> +dist-cross-download:
> @if [ "$(ARCHCONFIG)" != "X86_64" ]; then \
> echo "$(ARCHCONFIG) ERROR: cross compile only enabled for x86_64"; \
> exit 1; \
> @@ -24,22 +24,22 @@ rh-cross-download:
> @ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) \
> $(REDHAT)/scripts/download_cross.sh $(CROSS_PACKAGE_LIST)
>
> -rh-cross-aarch64-rpms: rh-cross-download rh-sources
> +dist-cross-aarch64-rpms: dist-cross-download dist-sources
> $(REDHAT)/scripts/x86_rngd.sh
> $(CROSS_RPMFLAGS) --target aarch64 --with cross -ba $(RPM)/SOURCES/$(PACKAGE_NAME).spec
> $(REDHAT)/scripts/generate-cross-report.sh "aarch64"
>
> -rh-cross-ppc64-rpms: rh-cross-download rh-sources
> +dist-cross-ppc64-rpms: dist-cross-download dist-sources
> $(REDHAT)/scripts/x86_rngd.sh
> $(CROSS_RPMFLAGS) --target ppc64 --with cross -ba $(RPM)/SOURCES/$(PACKAGE_NAME).spec
> $(REDHAT)/scripts/generate-cross-report.sh "ppc64"
>
> -rh-cross-s390x-rpms: rh-cross-download rh-sources
> +dist-cross-s390x-rpms: dist-cross-download dist-sources
> $(REDHAT)/scripts/x86_rngd.sh
> $(CROSS_RPMFLAGS) --target s390x --with cross -ba $(RPM)/SOURCES/$(PACKAGE_NAME).spec
> $(REDHAT)/scripts/generate-cross-report.sh "s390x"
>
> -rh-cross-all-rpms: rh-cross-download rh-sources
> +dist-cross-all-rpms: dist-cross-download dist-sources
> $(REDHAT)/scripts/x86_rngd.sh
> $(CROSS_RPMFLAGS) --target aarch64 --with cross -ba $(RPM)/SOURCES/$(PACKAGE_NAME).spec
> $(CROSS_RPMFLAGS) --target ppc64 --with cross -ba $(RPM)/SOURCES/$(PACKAGE_NAME).spec
> @@ -47,22 +47,22 @@ rh-cross-all-rpms: rh-cross-download rh-sources
> $(CROSS_RPMFLAGS) -ba $(RPM)/SOURCES/$(PACKAGE_NAME).spec
> $(REDHAT)/scripts/generate-cross-report.sh "aarch64 ppc64 s390x x86_64"
>
> -rh-cross-aarch64-build: rh-cross-download rh-sources
> +dist-cross-aarch64-build: dist-cross-download dist-sources
> $(REDHAT)/scripts/x86_rngd.sh
> $(CROSS_RPMFLAGS) --target aarch64 --with cross --without debuginfo -bc $(RPM)/SOURCES/$(PACKAGE_NAME).spec
> $(REDHAT)/scripts/generate-cross-report.sh "aarch64"
>
> -rh-cross-ppc64-build: rh-cross-download rh-sources
> +dist-cross-ppc64-build: dist-cross-download dist-sources
> $(REDHAT)/scripts/x86_rngd.sh
> $(CROSS_RPMFLAGS) --target ppc64 --with cross --without debuginfo -bc $(RPM)/SOURCES/$(PACKAGE_NAME).spec
> $(REDHAT)/scripts/generate-cross-report.sh "ppc64"
>
> -rh-cross-s390x-build: rh-cross-download rh-sources
> +dist-cross-s390x-build: dist-cross-download dist-sources
> $(REDHAT)/scripts/x86_rngd.sh
> $(CROSS_RPMFLAGS) --target s390x --with cross --without debuginfo -bc $(RPM)/SOURCES/$(PACKAGE_NAME).spec
> $(REDHAT)/scripts/generate-cross-report.sh "s390x"
>
> -rh-cross-all-builds: rh-cross-download rh-sources
> +dist-cross-all-builds: dist-cross-download dist-sources
> $(REDHAT)/scripts/x86_rngd.sh
> $(CROSS_RPMFLAGS) --target aarch64 --with cross --without debuginfo -bc $(RPM)/SOURCES/$(PACKAGE_NAME).spec
> $(CROSS_RPMFLAGS) --target ppc64 --with cross --without debuginfo -bc $(RPM)/SOURCES/$(PACKAGE_NAME).spec
> diff --git a/redhat/configs/README b/redhat/configs/README
> index 0d3c309da206..b07491a3445f 100644
> --- a/redhat/configs/README
> +++ b/redhat/configs/README
> @@ -39,7 +39,7 @@ been reviewed by Fedora kernel maintainers. Since the Fedora kernel turns on
> more configuration options than ARK, there are often settings that are not set
> to default in pending-common. These settings are moved to the fedora/
> configuration directory after community review. Options are populated with
> -"make FLAVOR=fedora rh-commit-configs".
> +"make FLAVOR=fedora dist-commit-configs".
>
>
> All the configuration options for each arch and variant can be found
> diff --git a/redhat/configs/editconfig b/redhat/configs/editconfig
> index 09ece06029c1..0261b0393d49 100755
> --- a/redhat/configs/editconfig
> +++ b/redhat/configs/editconfig
> @@ -4,7 +4,7 @@
> #
> # For help, run ./editconfig -h
> #
> -# TODO: Is there a way to verify the output? Maybe run 'make rh-configs' &
> +# TODO: Is there a way to verify the output? Maybe run 'make dist-configs' &
> # the process_configs.sh -c tool on the modified CONFIG? This would
> # require a modification to process_configs.sh to take a single
> # CONFIG option but is do-able.
> diff --git a/redhat/configs/evaluate_configs b/redhat/configs/evaluate_configs
> index 3835ca7421ba..5ed3e0407bca 100755
> --- a/redhat/configs/evaluate_configs
> +++ b/redhat/configs/evaluate_configs
> @@ -499,7 +499,7 @@ fi
> # Find configs that are requested but do not exist in the final .configs
> #
> if [ "$FINDDEAD" ]; then
> - (cd ..; make rh-configs)
> + (cd ..; make dist-configs)
>
> awk '
> /is not set/ {
> diff --git a/redhat/docs/index.rst b/redhat/docs/index.rst
> index 7d13aec5940f..36601ed011ca 100644
> --- a/redhat/docs/index.rst
> +++ b/redhat/docs/index.rst
> @@ -40,7 +40,7 @@ Once GitLab finishes forking the repository (this can take a while):
> git checkout upstream/ark-latest
> # If you're on Fedora, you need to run:
> # ln -s /usr/bin/python3 /usr/libexec/platform-python
> - make rh-srpm
> + make dist-srpm
> sudo dnf builddep -y redhat/rpm/SPECS/kernel.spec
>
>
> @@ -60,8 +60,8 @@ patches) , a sub-system maintainer's tree, or your own creation.
> git merge -m "Merge branch 'os-build'" os-build
> # Fedora carries a patch to alter this setting, so we need to change the configuration to build a vanilla tree.
> sed -i 's/=13/=11/g' redhat/configs/fedora/generic/arm/aarch64/CONFIG_FORCE_MAX_ZONEORDER
> - # If you're targeting RHEL and have brew/rhpkg installed, use "make DIST=.elrdy rh-srpm" instead
> - make rh-srpm
> + # If you're targeting RHEL and have brew/rhpkg installed, use "make DIST=.elrdy dist-srpm" instead
> + make dist-srpm
>
> You can now build the SRPM however you like:
>
> @@ -73,7 +73,7 @@ You can now build the SRPM however you like:
> koji build --scratch rawhide redhat/rpm/SRPMS/kernel*src.rpm
>
> Want to add a patch? Just git-cherry-pick it or apply it with git-am and
> -re-run ``make rh-srpm``. Change configurations in ``redhat/configs/``
> +re-run ``make dist-srpm``. Change configurations in ``redhat/configs/``
> (consult the repository layout for details on this).
>
>
> diff --git a/redhat/docs/maintaining.rst b/redhat/docs/maintaining.rst
> index 3cfd8b6d2904..625884a7e154 100644
> --- a/redhat/docs/maintaining.rst
> +++ b/redhat/docs/maintaining.rst
> @@ -156,8 +156,8 @@ Snapshot Release
> git merge -m "Merge configuration and build scripts" os-build
> # If there's a temporary fix you want in just this build, you can run git-cherry-pick here.
> touch localversion
> - make rh-release
> - make rh-release-tag
> + make dist-release
> + make dist-release-tag
> git push upstream $(git describe)
> git branch -D build-branch
>
> @@ -170,8 +170,8 @@ Upstream Release
> git checkout -b ark/"$UPSTREAM_REF" ark/patches/"$UPSTREAM_REF"
> git merge -m "Merge configuration and build scripts" os-build
> touch localversion
> - make rh-release
> - make rh-release-tag
> + make dist-release
> + make dist-release-tag
> git push $(git describe) ark/"$UPSTREAM_REF" ark/patches/"$UPSTREAM_REF"
> git checkout ark-latest && git reset --hard ark/"$UPSTREAM_REF" && git push -f upstream ark-latest
>
> @@ -200,7 +200,7 @@ From the release branch/tag, run:
> # localversion sets the buildid, releases should have an empty build id
> rm localversion
> touch localversion
> - make rh-dist-git
> + make dist-dist-git
>
> cd /tmp/RHEL*/kernel
> git commit -a -s -F ../changelog
> @@ -219,7 +219,7 @@ From the release branch/tag, run:
> # localversion sets the buildid, releases should have an empty build id
> rm localversion
> touch localversion
> - make DIST=.elrdy rh-dist-git
> + make DIST=.elrdy dist-dist-git
> cd /tmp/RHEL-8*/kernel
> git commit -a -s -F ../changelog
> git push
> diff --git a/redhat/koji/Makefile b/redhat/koji/Makefile
> index c75afa4d4782..079244c24552 100644
> --- a/redhat/koji/Makefile
> +++ b/redhat/koji/Makefile
> @@ -27,7 +27,7 @@ buildid: notes
>
> sources: buildid
> echo $(BUILDID) > ../../localversion
> - $(MAKE) -C ../ rh-sources
> + $(MAKE) -C ../ dist-sources
> mv -f ../rpm/SOURCES/* .
> rm -f ./$(PACKAGE_NAME).spec
> mv ../rpm/SPECS/$(PACKAGE_NAME).spec .
> diff --git a/redhat/koji/kernel.spec b/redhat/koji/kernel.spec
> index 61c36ba8fb80..12f17a667b84 100644
> --- a/redhat/koji/kernel.spec
> +++ b/redhat/koji/kernel.spec
> @@ -1,4 +1,4 @@
> This is a dummy spec file. It will be replaced by the sources target of the
> Makefile in this directory. That target will replace this file with the real
> -kernel.spec file in ../rpm/SPECS as generated by make -C ../ rh-sources
> +kernel.spec file in ../rpm/SPECS as generated by make -C ../ dist-sources
>
> diff --git a/redhat/scripts/ci/ark-create-release.sh b/redhat/scripts/ci/ark-create-release.sh
> index fd57e533ddb4..8b3b414be953 100755
> --- a/redhat/scripts/ci/ark-create-release.sh
> +++ b/redhat/scripts/ci/ark-create-release.sh
> @@ -27,8 +27,8 @@ fi
> if [ -n "$BASE_RELEASE" ]; then
> printf "There's already a release for %s (tagged as %s); if you're trying \
> to create a new release check out that tag, apply any commits you \
> - want, and then run \"touch localversion && make rh-release && make \
> - rh-release-tag\".\n" "$UPSTREAM_REF" "$BASE_RELEASE"
> + want, and then run \"touch localversion && make dist-release && make \
> + dist-release-tag\".\n" "$UPSTREAM_REF" "$BASE_RELEASE"
> exit 3
> fi
>
> @@ -55,8 +55,8 @@ for patch_url in $MR_PATCHES; do
> done
>
> touch localversion
> -make rh-release
> -make rh-release-tag
> +make dist-release
> +make dist-release-tag
> RELEASE=$(git describe)
> git checkout ark-latest
> git reset --hard "$RELEASE"
> diff --git a/redhat/scripts/ci/ark-update-configs.sh b/redhat/scripts/ci/ark-update-configs.sh
> index 59a2fe9868f9..1669abe1ae89 100755
> --- a/redhat/scripts/ci/ark-update-configs.sh
> +++ b/redhat/scripts/ci/ark-update-configs.sh
> @@ -47,8 +47,8 @@ if ! git merge -m "Merge '$UPSTREAM_REF' into 'os-build'" "$UPSTREAM_REF"; then
> exit 1
> fi
>
> -make FLAVOR=fedora rh-configs-commit
> -make FLAVOR=rhel rh-configs-commit
> +make FLAVOR=fedora dist-configs-commit
> +make FLAVOR=rhel dist-configs-commit
>
> if git show -s --oneline HEAD | grep -q "AUTOMATIC: New configs"; then
> ./redhat/gen_config_patches.sh
> diff --git a/redhat/scripts/configdiff.sh b/redhat/scripts/configdiff.sh
> index 139efcb83c63..6c62a3412e94 100755
> --- a/redhat/scripts/configdiff.sh
> +++ b/redhat/scripts/configdiff.sh
> @@ -18,7 +18,7 @@ get_configarch()
> # to the srcarch used in the $RHCP_RHEL/pending-common/generic path.
> file=$1
>
> - # make rh-configs-prep uses <package-name>-<arch>-<variant>.config
> + # make dist-configs-prep uses <package-name>-<arch>-<variant>.config
> # the trick is to get the <package-name> and filter it out
> arch="$(echo "$file" | sed "s/$PACKAGE_NAME-\([^-]*\).*.config/\1/")"
>
> @@ -159,5 +159,5 @@ generate_rh_config()
> rm -rf $WORK
> }
>
> -make rh-configs-prep > /dev/null || die "Failed make rh-prep"
> +make dist-configs-prep > /dev/null || die "Failed make dist-prep"
> generate_rh_config
> diff --git a/redhat/scripts/download_cross.sh b/redhat/scripts/download_cross.sh
> index c674893f138a..2e2f719a43f8 100755
> --- a/redhat/scripts/download_cross.sh
> +++ b/redhat/scripts/download_cross.sh
> @@ -26,7 +26,7 @@ fi
>
> # if we're not root, all we can do now is see what's installed
> if [ "$(whoami)" != "root" ]; then
> - echo "Checking for RHEL7 cross compile packages. If this fails, run \"make rh-cross-download\" as root."
> + echo "Checking for RHEL7 cross compile packages. If this fails, run \"make dist-cross-download\" as root."
> rpm -q $@
> if [ $? == 0 ]; then
> echo "Compilers found."
> --
> 2.26.2
> _______________________________________________
> kernel mailing list -- kernel@xxxxxxxxxxxxxxxxxxxxxxx
> To unsubscribe send an email to kernel-leave@xxxxxxxxxxxxxxxxxxxxxxx
> Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives: https://lists.fedoraproject.org/archives/list/kernel@xxxxxxxxxxxxxxxxxxxxxxx
_______________________________________________
kernel mailing list -- kernel@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to kernel-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/kernel@xxxxxxxxxxxxxxxxxxxxxxx
