Apparently I got my wires crossed slightly. The results when booting 3.1.0 and 3.3.2 are different. So... I followed the instructions on fedoraproject.org, modifying the kernel command line options to get debugging output. 3.3.2 - console output -------------------------------------------------------------- ... [see attachment] Write protecting the kernel text: 5456k Write protecting the kernel read-only data: 2124k NX-protecting the kernel data: 4784K init[1] general protection ip:b771a419 sp:bffccc5c error:0 Kernel panic - not syncing: Attempting to kill init! ---------------------------------------------------------------------- At this point the system is locked up and there does not appear to be any way to retrieve any init.log file. See the attachment for a screen dump of the final bits of the console output. Because this computer is located remotely I don't have any way to access more output than that. 3.1.0 console output ----------------------------------------------------- ....[lots of output] dmesg | grep dracut >>> very many screenshots [ I have no way to save the output to a file] The last 7 screens of this dmesg output are attached. From the emergency shell, the output of dmsetup ls --tree --> No devices found blkid --> no output blkid -c udev --> no output 2.6 Boot --------------------------------------------------- Boots normally. Some data: dmsetup ls --tree VolGroup00-LogVol01 (253:1) â??â?? (104:2) VolGroup00-LogVol00 (253:0) â??â?? (104:2) blkid /dev/cciss/c0d0p1: LABEL="/boot" UUID="c051ed89-7747-4756-bb8e-6f15ccfead88" SEC_TYPE="ext2" TYPE="ext3" /dev/dm-0: UUID="8af89900-0449-40e8-952a-75b8ffa7a693" SEC_TYPE="ext2" TYPE="ext3" /dev/dm-1: TYPE="swap" /dev/cciss/c0d1p5: LABEL="/data1" UUID="c082e209-e3d9-4515-9327-e78fb434088a" SEC_TYPE="ext2" TYPE="ext3" /dev/cciss/c0d1p6: LABEL="/data2" UUID="3882e8f8-817e-4a6a-ae36-febcabddfcd4" SEC_TYPE="ext2" TYPE="ext3" /dev/cciss/c0d2: LABEL="data2" UUID="57fe361b-0d73-4cc9-9592-cfc7c8fad00d" SEC_TYPE="ext2" TYPE="ext3" /dev/cciss/c0d2p5: LABEL="/data3" UUID="5f079cb2-a086-4700-9b87-5d57e706dca8" SEC_TYPE="ext2" TYPE="ext3" /dev/cciss/c0d2p6: LABEL="/data4" UUID="cfcf37a2-f2ff-4ff5-98c7-d4fcd40e7418" SEC_TYPE="ext2" TYPE="ext3" /dev/VolGroup00/LogVol00: UUID="8af89900-0449-40e8-952a-75b8ffa7a693" SEC_TYPE="ext2" TYPE="ext3" /dev/VolGroup00/LogVol01: TYPE="swap" /dev/mapper/VolGroup00-LogVol01: TYPE="swap" /dev/mapper/VolGroup00-LogVol00: UUID="8af89900-0449-40e8-952a-75b8ffa7a693" SEC_TYPE="ext2" TYPE="ext3" /dev/cciss/c0d0p2: UUID="IC0t0N-WiTL-UQ7d-IsRD-w5Hz-91Pv-Big08T" TYPE="LVM2_member" blkid -c udev /dev/cciss/c0d0p1: LABEL="/boot" UUID="c051ed89-7747-4756-bb8e-6f15ccfead88" TYPE="ext3" /dev/cciss/c0d0p2: UUID="IC0t0N-WiTL-UQ7d-IsRD-w5Hz-91Pv-Big08T" TYPE="LVM2_member" /dev/cciss/c0d1p5: LABEL="/data1" UUID="c082e209-e3d9-4515-9327-e78fb434088a" TYPE="ext3" /dev/cciss/c0d1p6: LABEL="/data2" UUID="3882e8f8-817e-4a6a-ae36-febcabddfcd4" TYPE="ext3" /dev/cciss/c0d2: LABEL="data2" UUID="57fe361b-0d73-4cc9-9592-cfc7c8fad00d" SEC_TYPE="ext2" TYPE="ext3" /dev/cciss/c0d2p5: LABEL="/data3" UUID="5f079cb2-a086-4700-9b87-5d57e706dca8" TYPE="ext3" /dev/cciss/c0d2p6: LABEL="/data4" UUID="cfcf37a2-f2ff-4ff5-98c7-d4fcd40e7418" TYPE="ext3" /dev/mapper/VolGroup00-LogVol00: UUID="8af89900-0449-40e8-952a-75b8ffa7a693" TYPE="ext3" /dev/mapper/VolGroup00-LogVol01: TYPE="swap" more /etc/fstab /dev/VolGroup00/LogVol00 / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm tmpfs defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0 LABEL=/data1 /d0 ext3 rw,acl 1 2 LABEL=/data2 /d1 ext3 defaults 1 2 LABEL=/data3 /d2 ext3 defaults 1 2 LABEL=/data4 /d3 ext3 defaults 1 2 Thanks! Jim
_______________________________________________ kernel mailing list kernel@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/kernel
