From: RA-Jay Hung <jay_hung@xxxxxxxxxxxxxx> commit 7f6e144fb99a4a70d3c5ad5f074204c5b89a6f65 upstream. PCI/PCIE radio off behavior is different from SOC/USB. They mainly use MCU command to disable DMA, TX/RX and enter power saving mode. Resolves hang during suspend: https://bugzilla.redhat.com/show_bug.cgi?id=691128 Reported-by: Bastiaan Jacques <bastiaan@xxxxxxxxxxxx> Signed-off-by: RA-Jay Hung <jay_hung@xxxxxxxxxxxxxx> Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx> Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx> Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx> --- drivers/net/wireless/rt2x00/rt2800lib.c | 6 ----- drivers/net/wireless/rt2x00/rt2800pci.c | 36 ++++++++---------------------- 2 files changed, 10 insertions(+), 32 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 54917a2..e2a528d 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2810,10 +2810,7 @@ void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev) rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); /* Wait for DMA, ignore error */ @@ -2823,9 +2820,6 @@ void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 0); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); - rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); } EXPORT_SYMBOL_GPL(rt2800_disable_radio); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 3b3f1e4..37a38b5 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -475,39 +475,23 @@ static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) { - u32 reg; - - rt2800_disable_radio(rt2x00dev); - - rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280); - - rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, ®); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX0, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX1, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX2, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX3, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX4, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DTX_IDX5, 1); - rt2x00_set_field32(®, WPDMA_RST_IDX_DRX_IDX0, 1); - rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg); - - rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f); - rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00); + if (rt2x00_is_soc(rt2x00dev)) { + rt2800_disable_radio(rt2x00dev); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); + } } static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) { - /* - * Always put the device to sleep (even when we intend to wakeup!) - * if the device is booting and wasn't asleep it will return - * failure when attempting to wakeup. - */ - rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2); - if (state == STATE_AWAKE) { - rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0); + rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0x02); rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP); + } else if (state == STATE_SLEEP) { + rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, 0xffffffff); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, 0xffffffff); + rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0x01, 0xff, 0x01); } return 0; -- 1.7.1 _______________________________________________ kernel mailing list kernel@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/kernel
