Hi Timothy, On Wed, Jun 8, 2011 at 5:31 AM, Timothy Murphy <gayleard@xxxxxxxxxx> wrote: > I have a home LAN on network 192.168.2.0, > with a server at 192.168.2.2, > and various other laptops, iphones, etc on the LAN, > eg I am currently on laptop 192.168.2.7 . > > There seem to be 3 places where gateways are specified: > > 1. In /etc/dhcpd.conf on the server, under "option routers"; > > 2. In /etc/sysconfig/network-scripts/ifcfg-* > on the client machines; > > 3. In /etc/network on these machines. > > I've read that the entries in ifcfg-* are ignored? > > I haven't actually given gateways in /etc/network anywhere. > Perhaps I should? > > My server has address 192.168.2.2 on eth1, > and address 192.168.1.2 on eth0, which is > connected to my ADSL modem with address 192.168.1.254 . > > Now I'm wondering if I should give > GATEWAY=192.168.2.2 or GATEWAY=192.168.1.254 > on client machines? The default gateway on your clients should be 192.168.2.2 > > route -n on the server gives > ------------------------------ > Destination Gateway Genmask Flags Metric Ref Use > Iface > 192.168.5.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 > 192.168.5.0 192.168.5.2 255.255.255.0 UG 0 0 0 tun0 > 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 > 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 > 0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 eth0 > ------------------------------ > I'm not sure how it found the (correct) default gateway 192.168.1.254 ? > > These questions arise because I tried changing my server > to machine 192.168.1.5, connected to the modem. > Everything worked fine on the new server, > but I could not access the ethernet on other machines, > even after modifying the route tables on these machines > to have default gateway 192.168.2.5 (the new server). > > I tried both with NetworkManager and with the network service, > but neither worked satisfactorily. > > Any enlightenment gratefully received. To get Internet on your client machines, you need to enable IP forwarding on server (I am not sure whether its enabled by default or not) and then you need to add a SNAT rule with the IP address '192.168.1.254' (your server's WAN side IP) Hope this helps. Thanks, Anoop > > -- > Timothy Murphy > e-mail: gayleard /at/ eircom.net > tel: +353-86-2336090, +353-1-2842366 > s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland > > _______________________________________________ > kde mailing list > kde@xxxxxxxxxxxxxxxxxxxxxxx > https://admin.fedoraproject.org/mailman/listinfo/kde > New to KDE4? - get help from http://userbase.kde.org > _______________________________________________ kde mailing list kde@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/kde New to KDE4? - get help from http://userbase.kde.org
