commit 7055433ef082eb3c77aefc9c28fc5bdb58a07574
Author: Miro Hrončok <miro@xxxxxxxxxx>
Date: Thu Mar 21 17:52:33 2013 +0100
Initial commit (#890839)
.gitignore | 1 +
slic3r-datadir.patch | 15 +++++
slic3r-english-locale.patch | 35 +++++++++++
slic3r.desktop | 8 +++
slic3r.spec | 140 +++++++++++++++++++++++++++++++++++++++++++
sources | 1 +
6 files changed, 200 insertions(+), 0 deletions(-)
---
diff --git a/.gitignore b/.gitignore
index e69de29..a5aeba9 100644
--- a/.gitignore
+++ b/.gitignore
@@ -0,0 +1 @@
+/slic3r-0.9.8-7105243.tar.gz
diff --git a/slic3r-datadir.patch b/slic3r-datadir.patch
new file mode 100644
index 0000000..1456dfe
--- /dev/null
+++ b/slic3r-datadir.patch
@@ -0,0 +1,15 @@
+Search for icons and such in /usr/share/slic3r.
+
+diff -ru a/lib/Slic3r.pm c/lib/Slic3r.pm
+--- a/lib/Slic3r.pm 2013-01-17 15:50:45.000000000 +0100
++++ c/lib/Slic3r.pm 2013-01-22 00:15:56.797243399 +0100
+@@ -24,8 +24,7 @@
+ warn "Running Slic3r under Perl >= 5.16 is not supported nor recommended\n"
+ if $^V >= v5.16;
+
+-use FindBin;
+-our $var = "$FindBin::Bin/var";
++our $var = "/usr/share/slic3r";
+
+ use Encode;
+ use Encode::Locale;
diff --git a/slic3r-english-locale.patch b/slic3r-english-locale.patch
new file mode 100644
index 0000000..69bde5d
--- /dev/null
+++ b/slic3r-english-locale.patch
@@ -0,0 +1,35 @@
+Upstream constantly refuses to support Perl >= 5.16.
+They say it handles locales incorrectly, but it might be caused by bad code
+design. Running Slic3r with locales using other char than point as a decimal
+separator causes crashes. This patch removes the warning about unsupported
+Perl version (it is very annoying) and forces Slic3r to use English decimal
+separator by setting the LC_NUMERIC environment variable. Setting it in more
+Perl way doesn't work and is overwritten in some of imported modules.
+https://github.com/alexrj/Slic3r/issues/935
+https://github.com/alexrj/Slic3r/pull/936#issuecomment-12544383
+https://github.com/alexrj/Slic3r/issues/538#issuecomment-14560494
+
+diff -ru a/lib/Slic3r.pm b/lib/Slic3r.pm
+--- a/lib/Slic3r.pm 2013-01-22 00:15:56.797243399 +0100
++++ b/lib/Slic3r.pm 2013-01-22 00:29:55.519336602 +0100
+@@ -21,9 +21,6 @@
+ $have_threads = $Config{useithreads} && eval "use threads; use Thread::Queue; 1";
+ }
+
+-warn "Running Slic3r under Perl >= 5.16 is not supported nor recommended\n"
+- if $^V >= v5.16;
+-
+ our $var = "/usr/share/slic3r";
+
+ use Encode;
+diff -ru a/slic3r.pl b/slic3r.pl
+--- a/slic3r.pl 2013-01-17 15:50:45.000000000 +0100
++++ b/slic3r.pl 2013-01-22 00:30:19.327252847 +0100
+@@ -10,6 +10,7 @@
+
+ use Getopt::Long qw(:config no_auto_abbrev);
+ use List::Util qw(first);
++$ENV{LC_NUMERIC} = 'en_US.UTF-8';
+ use Slic3r;
+ $|++;
+
diff --git a/slic3r.desktop b/slic3r.desktop
new file mode 100644
index 0000000..ab74c86
--- /dev/null
+++ b/slic3r.desktop
@@ -0,0 +1,8 @@
+
+[Desktop Entry]
+Name=Slic3r
+Exec=slic3r
+Icon=/usr/share/pixmaps/slic3r.ico
+Terminal=false
+Type=Application
+Categories=Graphics;
diff --git a/slic3r.spec b/slic3r.spec
new file mode 100644
index 0000000..c5ebce7
--- /dev/null
+++ b/slic3r.spec
@@ -0,0 +1,140 @@
+Name: slic3r
+Version: 0.9.8
+Release: 4%{?dist}
+Summary: G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
+License: AGPLv3 and CC-BY
+# Images are CC-BY, code is AGPLv3
+Group: Applications/Engineering
+URL: http://slic3r.org/
+%global commit 71052433de0ff1f3da04471ccbb572babafc3cae
+%global shortcommit %(c=%{commit}; echo ${c:0:7})
+Source0: https://github.com/alexrj/Slic3r/archive/%{commit}/%{name}-%{version}-%{shortcommit}.tar.gz
+
+# Use /usr/share to store icons
+Patch0: %{name}-datadir.patch
+
+# Use English decimal separator for numbers
+# Reasons are a bit complicated and are described in the patch
+Patch1: %{name}-english-locale.patch
+
+Source1: %{name}.desktop
+BuildArch: noarch
+BuildRequires: perl(Module::Build)
+BuildRequires: perl(List::Util)
+BuildRequires: perl(Test::More)
+BuildRequires: perl(Math::Clipper) >= 1.17
+BuildRequires: perl(Moo) >= 0.091009
+BuildRequires: perl(File::Spec)
+BuildRequires: perl(Math::ConvexHull) >= 1.0.4
+BuildRequires: perl(Math::ConvexHull::MonotoneChain)
+BuildRequires: perl(XML::SAX)
+BuildRequires: perl(XML::SAX::ExpatXS)
+BuildRequires: perl(Math::PlanePath)
+BuildRequires: perl(Scalar::Util)
+BuildRequires: perl(SVG)
+BuildRequires: perl(parent)
+BuildRequires: perl(Wx)
+BuildRequires: perl(Boost::Geometry::Utils)
+BuildRequires: perl(Math::Geometry::Voronoi)
+BuildRequires: perl(Growl::GNTP)
+BuildRequires: perl(Net::DBus)
+BuildRequires: perl(IO::Scalar)
+BuildRequires: desktop-file-utils
+Requires: perl(XML::SAX)
+Requires: perl(Growl::GNTP)
+Requires: perl(Net::DBus)
+Requires: perl(Math::Clipper) >= 1.17
+Requires: perl(:MODULE_COMPAT_%(eval "`perl -V:version`"; echo $version))
+
+%if 0%{?fedora} < 18
+# This is provided by XML::SAX (but not stated there)
+%filter_from_requires /perl(XML::SAX::PurePerl)/d
+%filter_setup
+%endif
+
+%description
+Slic3r is a G-code generator for 3D printers. It's compatible with RepRaps,
+Makerbots, Ultimakers and many more machines.
+See the project homepage at slic3r.org and the documentation on the Slic3r wiki
+for more information.
+
+%prep
+%setup -qn Slic3r-%{commit}
+%patch0 -p1
+%patch1 -p1
+
+%build
+perl Build.PL installdirs=vendor optimize="$RPM_OPT_FLAGS"
+./Build
+
+%install
+./Build install destdir=%{buildroot} create_packlist=0
+find %{buildroot} -type f -name '*.bs' -size 0 -exec rm -f {} \;
+
+mkdir -p %{buildroot}%{_datadir}/%{name}
+mkdir -p %{buildroot}%{_datadir}/pixmaps
+
+mv -f %{buildroot}%{_bindir}/%{name}.pl %{buildroot}%{_bindir}/%{name}
+cp -a var/* %{buildroot}%{_datadir}/%{name}
+ln -s ../%{name}/Slic3r.ico %{buildroot}%{_datadir}/pixmaps/%{name}.ico
+desktop-file-install --dir=%{buildroot}%{_datadir}/applications %{SOURCE1}
+
+%{_fixperms} %{buildroot}/*
+
+%check
+./Build test
+
+%files
+%doc MANIFEST README.markdown
+%{_bindir}/%{name}
+%{perl_vendorlib}/Slic3r*
+%{_datadir}/pixmaps/%{name}.ico
+%{_datadir}/applications/%{name}.desktop
+%{_datadir}/%{name}
+%{_mandir}/man3/*
+
+%changelog
+* Wed Mar 20 2013 Miro Hrončok <mhroncok@xxxxxxxxxx> - 0.9.8-4
+- Comments added about patches
+
+* Mon Mar 11 2013 Miro Hrončok <mhroncok@xxxxxxxxxx> - 0.9.8-3
+- In-file justification provided for patches
+
+* Mon Jan 21 2013 Miro Hrončok <mhroncok@xxxxxxxxxx> - 0.9.8-2
+- Added patch to grab icons from %%{datadir}/%%{name}
+- Added patch to avoid bad locales behavior
+- Removed no longer needed filtering perl(Wx::Dialog) from Requires
+- Filter perl(XML::SAX::PurePerl) only in F17
+- Removed Perl default filter
+- Removed bash launcher
+- Renamed slic3r.pl to slic3r
+
+* Thu Jan 17 2013 Miro Hrončok <mhroncok@xxxxxxxxxx> - 0.9.8-1
+- New version
+- (Build)Requires Math::Clipper 1.17
+
+* Thu Jan 17 2013 Miro Hrončok <mhroncok@xxxxxxxxxx> - 0.9.7-3
+- Updated source to respect GitHub rule
+- Dropped mkdir, ln -s, cp, mv, perl macros
+- Reorganized %%install section a bit
+- Added version to Require perl(Math::Clipper)
+
+* Sat Jan 05 2013 Miro Hrončok <miro@xxxxxxxxxx> - 0.9.7-2
+- Added Require perl(Math::Clipper)
+
+* Sun Dec 30 2012 Miro Hrončok <miro@xxxxxxxxxx> - 0.9.7-1
+- New version
+- Do not download additional sources from GitHub
+- Removed deleting empty directories
+
+* Fri Nov 16 2012 Miro Hrončok <miro@xxxxxxxxxx> - 0.9.5-2
+- Removed BRs provided by perl package
+
+* Wed Nov 14 2012 Miro Hrončok <miro@xxxxxxxxxx> 0.9.5-1
+- New version
+- Requires perl(Math::Clipper) >= 1.14
+- Requires perl(Math::ConvexHull::MonotoneChain)
+- Requires perl(XML::SAX::ExpatXS)
+
+* Thu Oct 04 2012 Miro Hrončok <miro@xxxxxxxxxx> 0.9.3-1
+- New package
diff --git a/sources b/sources
index e69de29..6c4b569 100644
--- a/sources
+++ b/sources
@@ -0,0 +1 @@
+ca45fd7f2825214dc71b0a34cf2f46ac slic3r-0.9.8-7105243.tar.gz
--
Fedora Extras Perl SIG
http://www.fedoraproject.org/wiki/Extras/SIGs/Perl
perl-devel mailing list
perl-devel@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/perl-devel
