Hello.
I'm afraid the new release did not work for any of my two Allwinner devices. The dd commands went through of course but upon rebooting the devices failed to reach the login; please see the console outputs attached.
BR
-----Original Message-----
From: Peter Robinson <pbrobinson@xxxxxxxxx>
To: Adrian Torregrosa <adrian.torregrosa@xxxxxxxxx>
Subject: Re: [fedora-arm] U-Boot 2024.10 testing
Date: 2024.09.02 23:31:09
Hi Adrian,
I created Bug 2309138 - Allwinner A64 devices fail to boot once their uboot gets upgraded to 2024.04.
So I think uboot-tools-2024.10-0.3.rc3.fc41 should fix the Allwinner
issues, if you could test it and provide karma on the update below
that would be fab. I tested it on my Pine64+
I upgraded mi Radxa Rock Pi E with the UBoot in the rc2 .rpm and as far as I can tell it works fine:U-Boot TPL 2024.10-rc2 (Aug 15 2024 - 00:00:00)DDR3, 333MHzBW=32 Col=10 Bk=8 CS0 Row=14 CS=1 Die BW=16 Size=512MBTrying to boot from BOOTROMReturning to boot ROM...U-Boot SPL 2024.10-rc2 (Aug 15 2024 - 00:00:00 +0000)Trying to boot from MMC2## Checking hash(es) for config config-1 ... OK## Checking hash(es) for Image atf-1 ... sha256+ OK## Checking hash(es) for Image u-boot ... sha256+ OK## Checking hash(es) for Image fdt-1 ... sha256+ OK## Checking hash(es) for Image atf-2 ... sha256+ OK## Checking hash(es) for Image atf-3 ... sha256+ OKNOTICE: BL31: v2.10.4(release):NOTICE: BL31: Built : 00:00:00, Jul 17 2024NOTICE: BL31:Rockchip release version: v1.2U-Boot 2024.10-rc2 (Aug 15 2024 - 00:00:00 +0000)Model: Radxa ROCK Pi EDRAM: 512 MiB (effective 510 MiB)PMIC: RK805 (on=0x40, off=0x01)Core: 244 devices, 29 uclasses, devicetree: separateMMC: mmc@ff500000: 1, mmc@ff520000: 0Loading Environment from MMC... Reading from MMC(1)... *** Warning - bad CRC, using default environmentIn: serial@ff130000Out: serial@ff130000Err: serial@ff130000Model: Radxa ROCK Pi ENet: eth0: ethernet@ff540000Found DTB: rockchip/rk3328-rock-pi-e.dtbCard did not respond to voltage select! : -110*** U-Boot Boot Menu ***Fedorammc 1ExitPress UP/DOWN to move, ENTER to select, ESC to quitBooting: FedoraFound DTB: rockchip/rk3328-rock-pi-e.dtbethernet@ff540000 Waiting for PHY auto negotiation to complete....... doneSpeed: 1000, full duplex...Best regards.-----Original Message-----From: Peter Robinson <pbrobinson@xxxxxxxxx>To: Adrian Torregrosa <adrian.torregrosa@xxxxxxxxx>Subject: Re: [fedora-arm] U-Boot 2024.10 testingDate: 2024.09.01 19:43:27Hi Adrian,A couple of weeks ago I upgraded my Orange Pi Zero Plus and my Sinovoip Banana Pi M64, both of which are based on Allwinner 64, from F39 to F40. That went fine so after that I attempted upgrading their UBoots and that did not work:I think I've got to the bottom of the issue, any chance you can do aF-41 bug report for me? Link below should go straight there for you.So I reverted back to U-Boot SPL 2023.07.This afternoon I tried upgrading the Banana Pi to this rc2 version and the result was quite similar:Yup, it's the same.For the record, I was able to upgrade my Raspberry Pi 3B's and my Radxa Rock Pi E's UBoots to 2024.04.What about to the 2024.10 RC builds in F-41? You can use the F-41U-Boot without having to upgrade the OS. Mostly interested in theRockPi as I can test the RPi3.Thanks,PeterBest regards.-----Original Message-----From: Peter Robinson <pbrobinson@xxxxxxxxx>Subject: [fedora-arm] U-Boot 2024.10 testingDate: 2024.08.16 12:45:29Hi Folks,I've started building the 2024.10 RCs in F-41+ so it would be great toget some testing.I found that at least the Allwinner a64 devices looked like theyregressed in F-40 and I've tested the Pine64+ with the rc2 build and Ithink they should be OK now.It would be great if people could test and provide some feedback onthese builds as we go towards F-41 beta freeze.Peter
U-Boot SPL 2024.10-rc3 (Sep 02 2024 - 00:00:00 +0000)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.10.4(release):
NOTICE: BL31: Built : 00:00:00, Jul 17 2024
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x20b5940, model: BananaPi-M64
SCP/INF: Crust v0.6.10000
U-Boot 2024.10-rc3 (Sep 02 2024 - 00:00:00 +0000) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: BananaPi-M64
DRAM: 2 GiB
Core: 76 devices, 21 uclasses, devicetree: separate
WDT: Not starting watchdog@1c20ca0
MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Allwinner mUSB OTG (Peripheral)
Net: eth0: ethernet@1c30000using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
, eth1: usb_ether
starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
Bus usb@1c1b000: USB EHCI 1.00
Bus usb@1c1b400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
scanning bus usb@1c1b000 for devices... 2 USB Device(s) found
scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Found DTB: allwinner/sun50i-a64-bananapi-m64.dtb
Card did not respond to voltage select! : -110
Failed to load EFI variables
*** U-Boot Boot Menu ***
mmc 0
mmc 1
Exit
Press UP/DOWN to move, ENTER to select, ESC to quit
Booting: mmc 0
Found DTB: allwinner/sun50i-a64-bananapi-m64.dtb
ethernet@1c30000 Waiting for PHY auto negotiation to complete....... done
GRUB version 2.06
┌───────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│*Fedora Linux (6.9.12-200.fc40.aarch64) 40 (Forty) │
│ UEFI Firmware Settings │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└───────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
Use the ▲ and ▼ keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a
command-line. ESC to return previous menu.
The highlighted entry will be executed automatically in 0s.
Booting `Fedora Linux (6.9.12-200.fc40.aarch64) 40 (Forty)'
error: ../../grub-core/disk/efi/efidisk.c:615:failure reading sector 0x1e6f80 from `hd0'.
Press any key to continue...
[ 1.938437] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 1.938462] fbcon: Taking over console
[ 1.950490] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.9.12-200.fc40.aarch64 #1
[ 1.957898] Hardware name: sinovoip BananaPi-M64/BananaPi-M64, BIOS 2024.10-rc3 10/01/2024
[ 1.966170] Call trace:
[ 1.968626] dump_backtrace+0xdc/0x140
[ 1.972398] show_stack+0x20/0x40
[ 1.975727] dump_stack_lvl+0x60/0x80
[ 1.979409] dump_stack+0x18/0x28
[ 1.982740] panic+0x180/0x390
[ 1.985813] mount_root_generic+0x200/0x2c8
[ 1.990019] mount_root+0xd4/0xf0
[ 1.993351] prepare_namespace+0x1e4/0x258
[ 1.997464] kernel_init_freeable+0x1a8/0x1e8
[ 2.001838] kernel_init+0x28/0x158
[ 2.005341] ret_from_fork+0x10/0x20
[ 2.008936] SMP: stopping secondary CPUs
[ 2.012876] Kernel Offset: 0x1a0000 from 0xffff800080000000
[ 2.018455] PHYS_OFFSET: 0x40000000
[ 2.021952] CPU features: 0x0,00000060,00100000,0200421b
[ 2.027273] Memory Limit: none
[ 2.030343] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
U-Boot SPL 2024.10-rc3 (Sep 02 2024 - 00:00:00 +0000)
DRAM: 512 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.10.4(release):
NOTICE: BL31: Built : 00:00:00, Jul 17 2024
NOTICE: BL31: Detected Allwinner H5 SoC (1718)
NOTICE: BL31: Found U-Boot DTB at 0x20a63e8, model: Xunlong Orange Pi Zero Plus
NOTICE: PMIC: Assuming H5 reference regulator design
SCP/INF: Crust v0.6.10000
U-Boot 2024.10-rc3 (Sep 02 2024 - 00:00:00 +0000) Allwinner Technology
CPU: Allwinner H5 (SUN50I)
Model: Xunlong Orange Pi Zero Plus
DRAM: 512 MiB
Core: 67 devices, 20 uclasses, devicetree: separate
WDT: Not starting watchdog@1c20ca0
MMC: mmc@1c0f000: 0, mmc@1c10000: 1
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Net: eth0: ethernet@1c30000
starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
Bus usb@1c1b000: USB EHCI 1.00
Bus usb@1c1b400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
scanning bus usb@1c1b000 for devices... 1 USB Device(s) found
scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Found DTB: allwinner/sun50i-h5-orangepi-zero-plus.dtb
Card did not respond to voltage select! : -110
*** U-Boot Boot Menu ***
Fedora
mmc 0
Exit
Press UP/DOWN to move, ENTER to select, ESC to quit
Booting: Fedora
Found DTB: allwinner/sun50i-h5-orangepi-zero-plus.dtb
ethernet@1c30000 Waiting for PHY auto negotiation to complete....... done
GRUB version 2.06
┌───────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│*Fedora Linux (6.9.12-200.fc40.aarch64) 40 (Forty) │
│ UEFI Firmware Settings │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└───────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
Use the ▲ and ▼ keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a
command-line. ESC to return previous menu.
The highlighted entry will be executed automatically in 0s.
Booting `Fedora Linux (6.9.12-200.fc40.aarch64) 40 (Forty)'
EFI stub: Decompressing Linux Kernel...
EFI stub: EFI_RNG_PROTOCOL unavailable
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.9.12-200.fc40.aarch64 (mockbuild@a0f25bb3ef7640ddac41c2eb5a4f6985) (gcc (GCC) 14.1.1 20240701 (Red Hat 14.1.1-7), GNU ld version 2.41-37.fc40) #1 SMP PREEMPT_DYNAMIC Sat Jul 27 16:26:34 UTC 2024
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: Xunlong Orange Pi Zero Plus
[ 0.000000] efi: EFI v2.10 by Das U-Boot
[ 0.000000] efi: RTPROP=0x58ef8040 SMBIOS 3.0=0x59f3f000 MOKvar=0x58ee1000 MEMRESERVE=0x58ed8040
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x5fc972c0-0x5fcadfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000058ee0fff]
[ 0.000000] node 0: [mem 0x0000000058ee1000-0x0000000058ee1fff]
[ 0.000000] node 0: [mem 0x0000000058ee2000-0x0000000058ef7fff]
[ 0.000000] node 0: [mem 0x0000000058ef8000-0x0000000058ef8fff]
[ 0.000000] node 0: [mem 0x0000000058ef9000-0x0000000058ef9fff]
[ 0.000000] node 0: [mem 0x0000000058efa000-0x0000000058f1bfff]
[ 0.000000] node 0: [mem 0x0000000058f1c000-0x0000000059f3efff]
[ 0.000000] node 0: [mem 0x0000000059f3f000-0x0000000059f3ffff]
[ 0.000000] node 0: [mem 0x0000000059f40000-0x000000005df3ffff]
[ 0.000000] node 0: [mem 0x000000005df40000-0x000000005df5ffff]
[ 0.000000] node 0: [mem 0x000000005df60000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] cma: Reserved 64 MiB at 0x0000000054e00000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 55 pages/cpu s100776 r8192 d116312 u225280
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,msdos2)/vmlinuz-6.9.12-200.fc40.aarch64 root=UUID=869eff8d-1694-425b-8dc4-c00701742baf ro console=ttyS0,115200 console=tty0
[ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=(hd0,msdos2)/vmlinuz-6.9.12-200.fc40.aarch64", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024
[ 0.000000] Policy zone: DMA
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
[ 0.000000] software IO TLB: mapped [mem 0x000000005f15b000-0x000000005f25b000] (1MB)
[ 0.000000] Memory: 351560K/524288K available (20224K kernel code, 5388K rwdata, 16324K rodata, 12480K init, 10186K bss, 107192K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 62915 entries in 246 pages
[ 0.000000] ftrace: allocated 246 pages with 6 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] Dynamic Preempt: voluntary
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000439] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.001150] Console: colour dummy device 80x25
[ 0.001167] printk: legacy console [tty0] enabled
[ 0.003505] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.003546] pid_max: default: 32768 minimum: 301
[ 0.009262] LSM: initializing lsm=lockdown,capability,yama,selinux,bpf,landlock,ima,evm
[ 0.011788] Yama: becoming mindful.
[ 0.011828] SELinux: Initializing.
[ 0.021313] LSM support for eBPF active
[ 0.021341] landlock: Up and running.
[ 0.023131] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.023169] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.030331] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.032940] rcu: Hierarchical SRCU implementation.
[ 0.032985] rcu: Max phase no-delay instances is 400.
[ 0.036428] Remapping and enabling EFI services.
[ 0.037216] smp: Bringing up secondary CPUs ...
[ 0.039529] Detected VIPT I-cache on CPU1
[ 0.039680] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.041580] Detected VIPT I-cache on CPU2
[ 0.041701] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.043450] Detected VIPT I-cache on CPU3
[ 0.043562] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.043775] smp: Brought up 1 node, 4 CPUs
[ 0.043885] SMP: Total of 4 processors activated.
[ 0.043904] CPU: All CPU(s) started at EL2
[ 0.043952] CPU features: detected: 32-bit EL0 Support
[ 0.043972] CPU features: detected: 32-bit EL1 Support
[ 0.043994] CPU features: detected: CRC32 instructions
[ 0.044085] alternatives: applying system-wide alternatives
[ 0.045433] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.047479] devtmpfs: initialized
[ 0.057334] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.057450] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.064856] pinctrl core: initialized pinctrl subsystem
[ 0.067218] SMBIOS 3.7.0 present.
[ 0.067283] DMI: xunlong Xunlong Orange Pi Zero Plus/Xunlong Orange Pi Zero Plus, BIOS 2024.10-rc3 10/01/2024
[ 0.072831] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.075865] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.076394] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.076999] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.078472] audit: initializing netlink subsys (disabled)
[ 0.079094] audit: type=2000 audit(0.077:1): state=initialized audit_enabled=0 res=1
[ 0.081170] thermal_sys: Registered thermal governor 'fair_share'
[ 0.081180] thermal_sys: Registered thermal governor 'step_wise'
[ 0.081204] thermal_sys: Registered thermal governor 'user_space'
[ 0.081308] cpuidle: using governor menu
[ 0.081675] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.081867] ASID allocator initialised with 65536 entries
[ 0.083957] Serial: AMBA PL011 UART driver
[ 0.090163] platform 1100000.mixer: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000
[ 0.090912] platform 1100000.mixer: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000
[ 0.091071] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/mixer@1100000
[ 0.104774] Modules: 16544 pages in range for non-PLT usage
[ 0.104800] Modules: 508064 pages in range for PLT usage
[ 0.107033] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.107101] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.107137] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.107159] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.107182] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.107202] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.107224] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.107245] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.110100] Demotion targets for Node 0: null
[ 0.113052] cryptd: max_cpu_qlen set to 1000
[ 0.117106] raid6: skipped pq benchmark and selected neonx8
[ 0.117155] raid6: using neon recovery algorithm
[ 0.118564] fbcon: Taking over console
[ 0.118719] ACPI: Interpreter disabled.
[ 0.120280] iommu: Default domain type: Translated
[ 0.120316] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.122296] SCSI subsystem initialized
[ 0.122990] usbcore: registered new interface driver usbfs
[ 0.123076] usbcore: registered new interface driver hub
[ 0.123161] usbcore: registered new device driver usb
[ 0.123589] pps_core: LinuxPPS API ver. 1 registered
[ 0.123611] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.123657] PTP clock support registered
[ 0.124226] EDAC MC: Ver: 3.0.0
[ 0.124990] scmi_core: SCMI protocol bus registered
[ 0.125110] efivars: Registered efivars operations
[ 0.128132] NetLabel: Initializing
[ 0.128175] NetLabel: domain hash size = 128
[ 0.128193] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.128383] NetLabel: unlabeled traffic allowed by default
[ 0.128432] mctp: management component transport protocol core
[ 0.128454] NET: Registered PF_MCTP protocol family
[ 0.128970] vgaarb: loaded
[ 0.129846] clocksource: Switched to clocksource arch_sys_counter
[ 0.134710] VFS: Disk quotas dquot_6.6.0
[ 0.134954] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.135735] pnp: PnP ACPI: disabled
[ 0.150778] NET: Registered PF_INET protocol family
[ 0.151124] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.249529] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.249725] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.250322] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.250454] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.250620] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.251346] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear)
[ 0.251589] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.251640] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.252791] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.252875] NET: Registered PF_XDP protocol family
[ 0.252913] PCI: CLS 0 bytes, default 64
[ 0.253417] Trying to unpack rootfs image as initramfs...
[ 0.263314] kvm [1]: nv: 477 coarse grained trap handlers
[ 0.264037] kvm [1]: IPA Size Limit: 40 bits
[ 0.273048] kvm [1]: vgic interrupt IRQ9
[ 0.273200] kvm [1]: Hyp nVHE mode initialized successfully
[ 0.277641] Initialise system trusted keyrings
[ 0.277876] Key type blacklist registered
[ 0.278405] workingset: timestamp_bits=37 max_order=17 bucket_order=0
[ 0.278561] zbud: loaded
[ 0.298562] integrity: Platform Keyring initialized
[ 0.298667] integrity: Machine keyring initialized
[ 0.385348] NET: Registered PF_ALG protocol family
[ 0.385448] xor: measuring software checksum speed
[ 0.391089] 8regs : 1757 MB/sec
[ 0.396744] 32regs : 1764 MB/sec
[ 0.403029] arm64_neon : 1578 MB/sec
[ 0.403066] xor: using function: 32regs (1764 MB/sec)
[ 0.403102] Key type asymmetric registered
[ 0.403124] Asymmetric key parser 'x509' registered
[ 2.322953] Freeing initrd memory: 27172K
[ 2.357579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 2.358044] io scheduler mq-deadline registered
[ 2.358073] io scheduler kyber registered
[ 2.358561] io scheduler bfq registered
[ 2.369529] atomic64_test: passed
[ 2.397483] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.415781] msm_serial: driver initialized
[ 2.416294] SuperH (H)SCI(F) driver initialized
[ 2.424153] usbcore: registered new interface driver usbserial_generic
[ 2.424240] usbserial: USB Serial support registered for generic
[ 2.424553] mousedev: PS/2 mouse device common for all mice
[ 2.426505] sun6i-rtc 1f00000.rtc: registered as rtc0
[ 2.426561] sun6i-rtc 1f00000.rtc: hctosys: unable to read the hardware clock
[ 2.428596] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 2.428769] device-mapper: uevent: version 1.0.3
[ 2.429781] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@xxxxxxxxxxxxxxx
[ 2.433165] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.434265] SMCCC: SOC_ID: ID = jep106:091e:1718 Revision = 0x00000001
[ 2.435145] hid: raw HID events driver (C) Jiri Kosina
[ 2.435375] usbcore: registered new interface driver usbhid
[ 2.435399] usbhid: USB HID core driver
[ 2.438357] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.440419] drop_monitor: Initializing network drop monitor service
[ 2.440876] Initializing XFRM netlink socket
[ 2.442414] NET: Registered PF_INET6 protocol family
[ 2.476210] Segment Routing with IPv6
[ 2.476267] RPL Segment Routing with IPv6
[ 2.476390] In-situ OAM (IOAM) with IPv6
[ 2.476557] mip6: Mobile IPv6
[ 2.476600] NET: Registered PF_PACKET protocol family
[ 2.495509] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 2.495939] registered taskstats version 1
[ 2.497184] Loading compiled-in X.509 certificates
[ 2.553038] Loaded X.509 cert 'Fedora kernel signing key: 46b50358de5d7313b1884e54655096a6e5af07fa'
[ 2.597247] page_owner is disabled
[ 2.598192] Key type .fscrypt registered
[ 2.598223] Key type fscrypt-provisioning registered
[ 2.610044] Btrfs loaded, zoned=yes, fsverity=yes
[ 2.610255] Key type big_key registered
[ 2.611431] Key type encrypted registered
[ 2.611712] ima: secureboot mode disabled
[ 2.611743] ima: No TPM chip found, activating TPM-bypass!
[ 2.611787] Loading compiled-in module X.509 certificates
[ 2.615331] Loaded X.509 cert 'Fedora kernel signing key: 46b50358de5d7313b1884e54655096a6e5af07fa'
[ 2.615374] ima: Allocated hash algorithm: sha256
[ 2.615503] ima: No architecture policies found
[ 2.615683] evm: Initialising EVM extended attributes:
[ 2.615704] evm: security.selinux
[ 2.615721] evm: security.SMACK64 (disabled)
[ 2.615739] evm: security.SMACK64EXEC (disabled)
[ 2.615757] evm: security.SMACK64TRANSMUTE (disabled)
[ 2.615775] evm: security.SMACK64MMAP (disabled)
[ 2.615792] evm: security.apparmor (disabled)
[ 2.615809] evm: security.ima
[ 2.615825] evm: security.capability
[ 2.615860] evm: HMAC attrs: 0x1
[ 2.811349] alg: No test for 842 (842-scomp)
[ 2.811626] alg: No test for 842 (842-generic)
[ 3.611315] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 3.613783] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[ 3.615604] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 3.621424] sun50i-h5-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 3.623060] sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
[ 3.624142] printk: legacy console [ttyS0] disabled
[ 3.624766] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 153, base_baud = 1500000) is a 16550A
[ 3.624893] printk: legacy console [ttyS0] enabled
[ 5.144608] sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
[ 5.371791] clk: Disabling unused clocks
[ 5.375998] PM: genpd: Disabling unused power domains
[ 5.397506] Freeing unused kernel memory: 12480K
[ 5.416131] Checked W+X mappings: passed, no W+X pages found
[ 5.421938] Run /init as init process
[ 5.468238] systemd[1]: System time before build time, advancing clock.
[ 5.510434] systemd[1]: systemd 255.10-1.fc40 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 5.542977] systemd[1]: Detected architecture arm64.
[ 5.548000] systemd[1]: Running in initrd.
[ 5.554608] systemd[1]: Hostname set to <localhost.localdomain>.
[ 6.206551] systemd[1]: Queued start job for default target initrd.target.
[ 6.254492] systemd[1]: Expecting device dev-disk-by\x2duuid-869eff8d\x2d1694\x2d425b\x2d8dc4\x2dc00701742baf.device - /dev/disk/by-uuid/869eff8d-1694-425b-8dc4-c00701742baf...
[ 6.271792] systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
[ 6.280484] systemd[1]: Reached target slices.target - Slice Units.
[ 6.287337] systemd[1]: Reached target swap.target - Swaps.
[ 6.293414] systemd[1]: Reached target timers.target - Timer Units.
[ 6.301817] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 6.313133] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 6.322851] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 6.332941] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 6.341539] systemd[1]: Reached target sockets.target - Socket Units.
[ 6.378285] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 6.388889] systemd[1]: memstrack.service - Memstrack Anylazing Service was skipped because no trigger condition checks were met.
[ 6.417287] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 6.436480] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 6.445525] systemd[1]: systemd-pcrphase-initrd.service - TPM2 PCR Barrier (initrd) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 6.469994] systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
[ 6.492098] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 6.517048] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 6.612690] alua: device handler registered
[ 6.625962] systemd-journald[211]: Collecting audit messages is disabled.
[ 6.626066] emc: device handler registered
[ 6.646757] rdac: device handler registered
[ 6.661362] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 6.692365] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 6.705750] systemd[1]: Started systemd-journald.service - Journal Service.
Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Linux version 6.9.12-200.fc40.aarch64 (mockbuild@a0f25bb3ef7640ddac41c2eb5a4f6985) (gcc (GCC) 14.1.1 20240701 (Red Hat 14.1.1-7), GNU ld version 2.41-37.fc40) #1 SMP PREEMPT_DYNAMIC Sat Jul 27 16:26:34 UTC 2024
KASLR disabled due to lack of seed
Machine model: Xunlong Orange Pi Zero Plus
efi: EFI v2.10 by Das U-Boot
efi: RTPROP=0x58ef8040 SMBIOS 3.0=0x59f3f000 MOKvar=0x58ee1000 MEMRESERVE=0x58ed8040
NUMA: No NUMA configuration found
NUMA: Faking a node at [mem 0x0000000040000000-0x000000005fffffff]
NUMA: NODE_DATA [mem 0x5fc972c0-0x5fcadfff]
Zone ranges:
DMA [mem 0x0000000040000000-0x000000005fffffff]
DMA32 empty
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000040000000-0x0000000058ee0fff]
node 0: [mem 0x0000000058ee1000-0x0000000058ee1fff]
node 0: [mem 0x0000000058ee2000-0x0000000058ef7fff]
node 0: [mem 0x0000000058ef8000-0x0000000058ef8fff]
node 0: [mem 0x0000000058ef9000-0x0000000058ef9fff]
node 0: [mem 0x0000000058efa000-0x0000000058f1bfff]
node 0: [mem 0x0000000058f1c000-0x0000000059f3efff]
node 0: [mem 0x0000000059f3f000-0x0000000059f3ffff]
node 0: [mem 0x0000000059f40000-0x000000005df3ffff]
node 0: [mem 0x000000005df40000-0x000000005df5ffff]
node 0: [mem 0x000000005df60000-0x000000005fffffff]
Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
cma: Reserved 64 MiB at 0x0000000054e00000 on node -1
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.4
percpu: Embedded 55 pages/cpu s100776 r8192 d116312 u225280
pcpu-alloc: s100776 r8192 d116312 u225280 alloc=55*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Detected VIPT I-cache on CPU0
CPU features: detected: ARM erratum 845719
alternatives: applying boot alternatives
Kernel command line: BOOT_IMAGE=(hd0,msdos2)/vmlinuz-6.9.12-200.fc40.aarch64 root=UUID=869eff8d-1694-425b-8dc4-c00701742baf ro console=ttyS0,115200 console=tty0
Unknown kernel command line parameters "BOOT_IMAGE=(hd0,msdos2)/vmlinuz-6.9.12-200.fc40.aarch64", will be passed to user space.
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 129024
Policy zone: DMA
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
software IO TLB: area num 4.
software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
software IO TLB: mapped [mem 0x000000005f15b000-0x000000005f25b000] (1MB)
Memory: 351560K/524288K available (20224K kernel code, 5388K rwdata, 16324K rodata, 12480K init, 10186K bss, 107192K reserved, 65536K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 62915 entries in 246 pages
ftrace: allocated 246 pages with 6 groups
trace event string verifier disabled
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=4.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Root IRQ handler: gic_handle_irq
GIC: Using split EOI/Deactivate mode
rcu: srcu_init: Setting srcu_struct sizes based on contention.
clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
arch_timer: cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour dummy device 80x25
printk: legacy console [tty0] enabled
Calibrating[ 10.364748] sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
delay loop (ski[ 10.374198] sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
pped), value calculated using ti[ 10.385787] sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
mer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 10.397805] sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
pid_ma[ 10.398750] sunxi-mmc 1c0f000.mmc: Got CD GPIO
x: default: 3276[ 10.406680] ehci-platform 1c1b000.usb: EHCI Host Controller
8 minimum: 301 10.407184] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
0m
LS[ 10.407665] ehci-platform 1c1b000.usb: irq 158, io mem 0x01c1b000
M: initializing [ 10.407765] phy phy-1c19400.phy.0: Changing dr_mode to 1
lsm=lockdown,cap[ 10.407795] ehci-platform 1c1a000.usb: EHCI Host Controller
ability,yama,sel[ 10.408341] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 2
inux,bpf,landloc[ 10.413934] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
k,ima,evm
sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[0;21;39mYama: b[ 10.414904] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
ecoming mindful.[ 10.415188] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
[ 10.415420] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
SELinux: Initia[ 10.415557] sun8i-ce 1c15000.crypto: Register cbc(aes)
lizing.
10.421256] ehci-platform 1c1a000.usb: irq 157, io mem 0x01c1a000
;21;39mLSM suppo[ 10.422290] sun8i-ce 1c15000.crypto: Register ecb(aes)
rt for eBPF acti[ 10.426205] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
ve
10.429936] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
9mlandlock: Up a[ 10.430441] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ 10.430457] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mount[ 10.430468] usb usb1: Product: EHCI Host Controller
-cache hash tabl[ 10.430476] usb usb1: Manufacturer: Linux 6.9.12-200.fc40.aarch64 ehci_hcd
e entries: 1024 [ 10.430484] usb usb1: SerialNumber: 1c1b000.usb
(order: 1, 8192 [ 10.431553] hub 1-0:1.0: USB hub found
bytes, linear) 10.431657] hub 1-0:1.0: 1 port detected
0m
Mo[ 10.440339] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
untpoint-cache h[ 10.444146] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
ash table entrie[ 10.479796] mmc0: new high speed SDIO card at address 0001
s: 1024 (order: [ 10.486084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
1, 8192 bytes, l[ 10.514167] mmc1: host does not support reading read-only switch, assuming write-enable
inear)
10.517382] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
21;33mcacheinfo:[ 10.521713] mmc1: new high speed SDHC card at address aaaa
Unable to detec[ 10.523900] usb usb2: Product: EHCI Host Controller
t cache hierarch[ 10.655590] usb usb2: Manufacturer: Linux 6.9.12-200.fc40.aarch64 ehci_hcd
[ 10.663840] usb usb2: SerialNumber: 1c1a000.usb
rcu: [ 10.670730] hub 2-0:1.0: USB hub found
Hierarchical SRC[ 10.674954] hub 2-0:1.0: 1 port detected
U implementation.
rcu: Max phase no-delay instances is 400.
Remapping and enabling EFI services.
smp: Bringing up [ 10.692518] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
secondary CPUs ...
Detected VIPT [ 10.704071] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 3
I-cache on CPU1 Unable to handle kernel paging request at virtual address ffff000054044008
[0m
C[ 10.716185] ohci-platform 1c1b400.usb: irq 161, io mem 0x01c1b400
PU1: Booted seco[ 10.721927] Mem abort info:
ndary processor [ 10.733569] ESR = 0x0000000096000045
0x0000000001 [0x[ 10.738704] EC = 0x25: DABT (current EL), IL = 32 bits
410fd034]
SET = 0, FnV = 0
[0;21;39mDetecte[ 10.749888] EA = 0, S1PTW = 0
d VIPT I-cache o[ 10.754439] FSC = 0x05: level 1 translation fault
n CPU2
10.760717] Data abort info:
21;39mCPU2: Boot[ 10.764997] ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000
ed secondary pro[ 10.771883] CM = 0, WnR = 1, TnD = 0, TagAccess = 0
cessor 0x0000000[ 10.778324] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
002 [0x410fd034][ 10.785033] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000514ce000
[ 10.786296] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
Detected VIPT I-[ 10.793124] [ffff000054044008] pgd=180000005fdff003
[ 10.793160] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.802779] , p4d=180000005fdff003, pud=0000000000000000
[ 10.802810] Internal error: Oops: 0000000096000045 [#1] SMP
[ 10.802852] usb usb3: Product: Generic Platform OHCI controller
[ 10.809021] Modules linked in: ohci_platform des_generic
[ 10.809051] usb usb3: Manufacturer: Linux 6.9.12-200.fc40.aarch64 ohci_hcd
[ 10.809063] usb usb3: SerialNumber: 1c1b400.usb
[ 10.816268] libdes udc_core sun8i_ce(+) ohci_hcd nvmem_sunxi_sid
[ 10.817353] hub 3-0:1.0: USB hub found
[ 10.821610] phy_sun4i_usb ehci_platform sun4i_tcon sun6i_dma sunxi_mmc sun8i_tcon_top scsi_dh_rdac scsi_dh_emc
[ 10.821745] hub 3-0:1.0: 1 port detected
[ 10.827234] scsi_dh_alua
[ 10.827247] CPU: 0 PID: 306 Comm: (udev-worker) Not tainted 6.9.12-200.fc40.aarch64 #1
[ 10.884239] Hardware name: xunlong Xunlong Orange Pi Zero Plus/Xunlong Orange Pi Zero Plus, BIOS 2024.10-rc3 10/01/2024
[ 10.895035] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 10.898975] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[ 10.902010] pc : decay_va_pool_node+0xd8/0x5a0
[ 10.902032] lr : decay_va_pool_node+0xc4/0x5a0
[ 10.902617] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 4
[ 10.908664] sp : ffff800084593750
[ 10.908670] x29: ffff8000845937c0 x28: 0000000000000002 x27: 0000000000001880
[ 10.908690] x26: ffff000000044948 x25: 0000000000000000
[ 10.908913] ohci-platform 1c1a400.usb: irq 160, io mem 0x01c1a400
[ 10.913162] x24: ffff800084593798
[ 10.913172] x23: ffff8000845937a8 x22: ffff000000044000 x21: ffffffffffffffff
[ 10.957655] x20: 00000000000000a0 x19: ffff8000837481c8 x18: 0000000000000000
[ 10.964814] x17: 637261612e303463 x16: 662e3030322d3231 x15: 0000ffff81d60928
[ 10.970153] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 10.971972] x14: 5400160b13131717 x13: 0000000000000005 x12: 0000000000000003
[ 10.972007] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.972019] x11: 0000000000000000
[ 10.972038] usb usb4: Product: Generic Platform OHCI controller
[ 10.980284] x10: 0000000000001840 x9 : ffff8000804de30c
[ 10.980297] x8 : ffff8000837483e8
[ 10.980310] usb usb4: Manufacturer: Linux 6.9.12-200.fc40.aarch64 ohci_hcd
[ 10.980321] x7 : 0000000000000000
[ 10.980336] usb usb4: SerialNumber: 1c1a400.usb
[ 10.981267] hub 4-0:1.0: USB hub found
[ 10.987466] x6 : 000000000000003f
[ 10.987481] x5 : ffff000000044100 x4 : 0000000000000000 x3 : 0000000000000001
[ 10.987499] x2 : 0000000000000000 x1 : ffff000054044000
[ 10.987613] hub 4-0:1.0: 1 port detected
[ 10.994743] x0 : ffff000000044900
[ 10.994755] Call trace:
[ 10.994762] decay_va_pool_node+0xd8/0x5a0
[ 11.060766] __purge_vmap_area_lazy+0xa4/0x440
[ 11.065233] _vm_unmap_aliases+0x220/0x308
[ 11.069345] vm_unmap_aliases+0x24/0x38
[ 11.073195] change_memory_common+0x90/0x130
[ 11.077485] set_memory_ro+0x20/0x38
[ 11.081078] module_enable_rodata_ro+0x6c/0xe0
[ 11.085538] complete_formation+0x104/0x1d8
[ 11.089741] load_module+0x56c/0x7e8
[ 11.093329] __do_sys_init_module+0x13c/0x168
[ 11.097699] __arm64_sys_init_module+0x24/0x40
[ 11.102157] invoke_syscall+0x74/0x100
[ 11.105921] el0_svc_common.constprop.0+0xc8/0xf0
[ 11.110639] do_el0_svc+0x24/0x38
[ 11.113968] el0_svc+0x3c/0x158
[ 11.117132] el0t_64_sync_handler+0x120/0x138
[ 11.121509] el0t_64_sync+0x194/0x198
[ 11.125193] Code: 540025c2 f94002c1 f9002fe1 f94017e0 (f9000437)
[ 11.131302] ---[ end trace 0000000000000000 ]---
cache on CPU3 11.136000] note: (udev-worker)[306] exited with preempt_count 1
m
CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU: All CPU(s) started at EL2
CPU features: detected: 32-bit EL0 Support
CPU features: detected: 32-bit EL1 Support
CPU features: detected: CRC32 instructions
alternatives: applying system-wide alternatives
CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
SMBIOS 3.7.0 present.
DMI: xunlong Xunlong Orange Pi Zero Plus/Xunlong Orange Pi Zero Plus, BIOS 2024.10-rc3 10/01/2024
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.077:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
Serial: AMBA PL011 UART driver
platform 1100000.mixer: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000
platform 1100000.mixer: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000
platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/mixer@1100000
Modules: 16544 pages in range for non-PLT usage
Modules: 508064 pages in range for PLT usage
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
Demotion targets for Node 0: null
cryptd: max_cpu_qlen set to 1000
raid6: skipped pq benchmark and selected neonx8
raid6: using neon recovery algorithm
fbcon: Taking over console
ACPI: Interpreter disabled.
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
PTP clock support registered
EDAC MC: Ver: 3.0.0
scmi_core: SCMI protocol bus registered
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
vgaarb: loaded
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI: disabled
NET: Registered PF_INET protocol family
IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
TCP: Hash tables configured (established 4096 bind 4096)
MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear)
UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
kvm [1]: nv: 477 coarse grained trap handlers
kvm [1]: IPA Size Limit: 40 bits
kvm [1]: vgic interrupt IRQ9
kvm [1]: Hyp nVHE mode initialized successfully
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=37 max_order=17 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
NET: Registered PF_ALG protocol family
xor: measuring software checksum speed
8regs : 1757 MB/sec
32regs : 1764 MB/sec
arm64_neon : 1578 MB/sec
xor: using function: 32regs (1764 MB/sec)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 27172K
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed
Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
msm_serial: driver initialized
SuperH (H)SCI(F) driver initialized
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
mousedev: PS/2 mouse device common for all mice
sun6i-rtc 1f00000.rtc: registered as rtc0
sun6i-rtc 1f00000.rtc: hctosys: unable to read the hardware clock
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@xxxxxxxxxxxxxxx
ledtrig-cpu: registered to indicate activity on CPUs
SMCCC: SOC_ID: ID = jep106:091e:1718 Revision = 0x00000001
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
NET: Registered PF_PACKET protocol family
Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 46b50358de5d7313b1884e54655096a6e5af07fa'
page_owner is disabled
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, zoned=yes, fsverity=yes
Key type big_key registered
Key type encrypted registered
ima: secureboot mode disabled
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 46b50358de5d7313b1884e54655096a6e5af07fa'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor (disabled)
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
alg: No test for 842 (842-scomp)
alg: No test for 842 (842-generic)
gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
sun50i-h5-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
printk: legacy console [ttyS0] disabled
1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 153, base_baud = 1500000) is a 16550A
printk: legacy console [ttyS0] enabled
sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pd not found, using dummy regulator
clk: Disabling unused clocks
PM: genpd: Disabling unused power domains
Freeing unused kernel memory: 12480K
Checked W+X mappings: passed, no W+X pages found
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=(hd0,msdos2)/vmlinuz-6.9.12-200.fc40.aarch64
systemd[1]: System time before build time, advancing clock.
systemd[1]: systemd 255.10-1.fc40 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture arm64.
systemd[1]: Running in initrd.
systemd[1]: Hostname set to <localhost.localdomain>.
systemd[1]: Queued start job for default target initrd.target.
systemd[1]: Expecting device dev-disk-by\x2duuid-869eff8d\x2d1694\x2d425b\x2d8dc4\x2dc00701742baf.device - /dev/disk/by-uuid/869eff8d-1694-425b-8dc4-c00701742baf...
systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Reached target timers.target - Timer Units.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Reached target sockets.target - Socket Units.
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: memstrack.service - Memstrack Anylazing Service was skipped because no trigger condition checks were met.
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: systemd-pcrphase-initrd.service - TPM2 PCR Barrier (initrd) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
alua: device handler registered
systemd-journald[211]: Collecting audit messages is disabled.
emc: device handler registered
rdac: device handler registered
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
systemd[1]: Started systemd-journald.service - Journal Service.
[ OK ] Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ OK ] Reached target sysinit.target - System Initialization.
sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
[* ] (1 of 2) Job dev-disk-by\x2duuid-86…vice/start running (5s / no limit)
sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
sun50i-h5-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
sun8i-ce 1c15000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
sunxi-mmc 1c0f000.mmc: Got CD GPIO
ehci-platform 1c1b000.usb: EHCI Host Controller
ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1c1b000.usb: irq 158, io mem 0x01c1b000
phy phy-1c19400.phy.0: Changing dr_mode to 1
ehci-platform 1c1a000.usb: EHCI Host Controller
ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 2
ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
sun8i-ce 1c15000.crypto: Register cbc(aes)
ehci-platform 1c1a000.usb: irq 157, io mem 0x01c1a000
sun8i-ce 1c15000.crypto: Register ecb(aes)
sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 6.9.12-200.fc40.aarch64 ehci_hcd
usb usb1: SerialNumber: 1c1b000.usb
[ OK ] Started plymouth-start.service - Show Plymouth Boot Screen.
hub 1-0:1.0: 1 port detected
sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
mmc0: new high speed SDIO card at address 0001
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ OK ] Started systemd-ask-password-plymo…quests to Plymouth Directory Watch.
[ OK ] Reached target paths.target - Path Units.
[ OK ] Reached target basic.target - Basic System.
[ OK ] Started rngd.service - Hardware RNG Entropy Gatherer Daemon.
mmc1: host does not support reading read-only switch, assuming write-enable
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
mmc1: new high speed SDHC card at address aaaa
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 6.9.12-200.fc40.aarch64 ehci_hcd
usb usb2: SerialNumber: 1c1a000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci-platform 1c1b400.usb: Generic Platform OHCI controller
ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 3
Unable to handle kernel paging request at virtual address ffff000054044008
ohci-platform 1c1b400.usb: irq 161, io mem 0x01c1b400
Mem abort info:
ESR = 0x0000000096000045
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000514ce000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ffff000054044008] pgd=180000005fdff003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
, p4d=180000005fdff003, pud=0000000000000000
Internal error: Oops: 0000000096000045 [#1] SMP
usb usb3: Product: Generic Platform OHCI controller
Modules linked in: ohci_platform des_generic
usb usb3: Manufacturer: Linux 6.9.12-200.fc40.aarch64 ohci_hcd
usb usb3: SerialNumber: 1c1b400.usb
libdes udc_core sun8i_ce(+) ohci_hcd nvmem_sunxi_sid
hub 3-0:1.0: USB hub found
phy_sun4i_usb ehci_platform sun4i_tcon sun6i_dma sunxi_mmc sun8i_tcon_top scsi_dh_rdac scsi_dh_emc
hub 3-0:1.0: 1 port detected
scsi_dh_alua
CPU: 0 PID: 306 Comm: (udev-worker) Not tainted 6.9.12-200.fc40.aarch64 #1
Hardware name: xunlong Xunlong Orange Pi Zero Plus/Xunlong Orange Pi Zero Plus, BIOS 2024.10-rc3 10/01/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
ohci-platform 1c1a400.usb: Generic Platform OHCI controller
pc : decay_va_pool_node+0xd8/0x5a0
lr : decay_va_pool_node+0xc4/0x5a0
ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 4
sp : ffff800084593750
x29: ffff8000845937c0 x28: 0000000000000002 x27: 0000000000001880
x26: ffff000000044948 x25: 0000000000000000
ohci-platform 1c1a400.usb: irq 160, io mem 0x01c1a400
x24: ffff800084593798
x23: ffff8000845937a8 x22: ffff000000044000 x21: ffffffffffffffff
x20: 00000000000000a0 x19: ffff8000837481c8 x18: 0000000000000000
x17: 637261612e303463 x16: 662e3030322d3231 x15: 0000ffff81d60928
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
x14: 5400160b13131717 x13: 0000000000000005 x12: 0000000000000003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
x11: 0000000000000000
usb usb4: Product: Generic Platform OHCI controller
x10: 0000000000001840 x9 : ffff8000804de30c
x8 : ffff8000837483e8
usb usb4: Manufacturer: Linux 6.9.12-200.fc40.aarch64 ohci_hcd
x7 : 0000000000000000
usb usb4: SerialNumber: 1c1a400.usb
hub 4-0:1.0: USB hub found
x6 : 000000000000003f
x5 : ffff000000044100 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : ffff000054044000
hub 4-0:1.0: 1 port detected
x0 : ffff000000044900
Call trace:
decay_va_pool_node+0xd8/0x5a0
__purge_vmap_area_lazy+0xa4/0x440
_vm_unmap_aliases+0x220/0x308
vm_unmap_aliases+0x24/0x38
change_memory_common+0x90/0x130
set_memory_ro+0x20/0x38
module_enable_rodata_ro+0x6c/0xe0
complete_formation+0x104/0x1d8
load_module+0x56c/0x7e8
__do_sys_init_module+0x13c/0x168
__arm64_sys_init_module+0x24/0x40
invoke_syscall+0x74/0x100
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x158
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
Code: 540025c2 f94002c1 f9002fe1 f94017e0 (f9000437)
---[ end trace 0000000000000000 ]---
note: (udev-worker)[306] exited with preempt_count 1
[*** ] Job dev-disk-by\x2duuid-869eff8d\x2…start running (1min 3s / no limit)
[ 70.625891] sun8i-ce 1c15000.crypto: ERROR: Cannot allocate fallback for cbc(des3_ede) -110
[ 70.634321] alg: skcipher: failed to allocate transform for cbc-des3-sun8i-ce: -110
[ 70.642017] alg: self-tests for cbc(des3_ede) using cbc-des3-sun8i-ce failed (rc=-110)
[ 70.642028] ------------[ cut here ]------------
sun8i-[ 70.654605] alg: self-tests for cbc(des3_ede) using cbc-des3-sun8i-ce failed (rc=-110)
ce 1c15000.crypt[ 70.654683] WARNING: CPU: 1 PID: 331 at crypto/testmgr.c:5880 alg_test+0x950/0x9a0
o: ERROR: Cannot[ 70.672820] Modules linked in: ohci_platform des_generic libdes udc_core sun8i_ce(+) ohci_hcd nvmem_sunxi_sid phy_sun4i_usb ehci_platform sun4i_tcon sun6i_dma sunxi_mmc sun8i_tcon_top scsi_dh_rdac scsi_dh_emc scsi_dh_alua
allocate fallba[ 70.693810] CPU: 1 PID: 331 Comm: cryptomgr_test Tainted: G D 6.9.12-200.fc40.aarch64 #1
ck for cbc(des3_[ 70.693824] Hardware name: xunlong Xunlong Orange Pi Zero Plus/Xunlong Orange Pi Zero Plus, BIOS 2024.10-rc3 10/01/2024
ede) -110
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[0;21;31malg: sk[ 70.693843] pc : alg_test+0x950/0x9a0
cip[h e r :7 0f.a6i9l3e8d5 9t] lr : alg_test+0x950/0x9a0
o allocate trans[ 70.735218] sp : ffff8000844e3d40
form for cbc-des[ 70.735224] x29: ffff8000844e3df0 x28: 0000000000000059 x27: 00000000ffffff92
3-sun8i-ce: -110[ 70.735243] x26: 0000000000000027 x25: ffff800081573aa0 x24: 00000000ffffffff
[ 70.735260] x23: ffff8000837c3000 x22: ffff000000920a80 x21: 0000000000000385
[ 70.735278] x20: ffff000000920a00 x19: ffff8000815730e0 x18: 0000000000000000
[ 70.764401] x17: 64656c6961662065 x16: 632d69386e75732d x15: 0720072007200720
[ 70.778687] x14: 0000000000000000 x13: 20726f6620737473 x12: 65742d666c657320
[ 70.778705] x11: 656820747563205b x10: 0000000000000029 x9 : ffff80008025ebb4
[ 70.793000] x8 : 0000000000000029 x7 : 0000000000000001 x6 : 0000000000000029
[ 70.793017] x5 : ffff00001f35dd88 x4 : 0000000000000000 x3 : 0000000000000027
[ 70.800302] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000013bf2480
[ 70.800320] Call trace:
[ 70.817038] alg_test+0x950/0x9a0
[ 70.817055] cryptomgr_test+0x2c/0x58
[ 70.824046] kthread+0xf4/0x108
[ 70.824064] ret_from_fork+0x10/0x20
[ 70.830795] ---[ end trace 0000000000000000 ]---
[ 70.830912] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
[** ] Job dev-disk-by\x2duuid-869eff8d\x2…start running (1min 4s / no limit)
------------[ cut here ]------------
alg: self-tests for cbc(des3_ede) using cbc-des3-sun8i-ce failed (rc=-110)
WARNING: CPU: 1 PID: 331 at crypto/testmgr.c:5880 alg_test+0x950/0x9a0
Modules linked in: ohci_platform des_generic libdes udc_core sun8i_ce(+) ohci_hcd nvmem_sunxi_sid phy_sun4i_usb ehci_platform sun4i_tcon sun6i_dma su[ 70.891183] sun8i-ce 1c15000.crypto: Register md5
nxi_mmc sun8i_tcon_top scsi_dh_rdac scsi_dh_emc scsi_dh_alua
CPU: 1 PID: 331 Comm: cryptomgr_test Tainted: G D 6.9.12-200.fc40.aarch64 #1
Hardware name: xunlong Xunlong Orange Pi Zero Plus/Xunlong Orange Pi Zero Plus, BIOS 2024.10-rc3 10/01/2024
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : alg_test+0x950/0x9a0
lr : alg_test+0x950/0x9a0
sp : ffff8000844e3d40
x29: ff[ 70.941251] sun8i-ce 1c15000.crypto: Register sha1
ff8000844e3df0 x28: 0000000000000059 x27: 00000000ffffff92
x26: 0000000000000027 x25: ffff800081573aa0 x24: 00000000ffffffff
x23: ffff8000837c3000 x22: ffff000000920a80 x21: 0000000000000385
x20: ffff000000920a00 x19: ffff8000815730e0 x18: 0000000000000000
x17: 64656c6961662065 x16: 632d69386e75732d x15: 0720072007200720
x14: 0000000000000000 x13: 20726f6620737473 x12: 65742d666c657320
x11: 656820747563205b x10: 000000[ 70.990466] sun8i-ce 1c15000.crypto: Register sha224
0000000029 x9 : ffff80008025ebb4
x8 : 0000000000000029 x7 : 0000000000000001 x6 : 0000000000000029
x5 : ffff00001f35dd88 x4 : 0000000000000000 x3 : 0000000000000027
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000013bf2480
Call trace:
alg_test+0x950/0x9a0
cryptomgr_test+0x2c/0x58
kthread+0xf4/0x108
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
sun8i[ 71.040015] sun8i-ce 1c15000.crypto: Register sha256
-ce 1c15000.crypto: Register ecb(des3_ede)
sun8i-ce 1c15000.crypto: Register md5
sun8i-ce 1c15000.crypto: Register sha1
sun8i-ce 1c15000.crypto: Register sha224
sun8i-ce 1c15000.crypto: Register sha256
[ 71.090706] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha384 not supported
[ 71.097513] sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
[ 71.104262] sun8i-ce 1c15000.crypto: Register stdrng
sun8i-[ 71.109584] alg: No test for stdrng (sun8i-ce-prng)
ce 1c15000.crypt[ 71.109658] sun8i-ce 1c15000.crypto: TRNG not supported
o: DEBUG: Algo o[ 71.122199] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 0
f sha384 not supported
sun8i-ce 1c15000.crypto: DEBUG: Algo of sha512 not supported
sun8i-ce 1c15000.crypto: Register stdrng
alg: No test for stdrng (sun8i-ce-prng)
sun8i-ce 1c15000.crypto: TRNG not supported
[** 259.193872] random: crng init done
;31m* ] Job dev-disk-by\x2duuid-869eff8d\x2…tart running (4min 12s / no limit)
[* ] Job dev-disk-by\x2duuid-869eff8d\x2…tart running (6min 54s / no limit)
-- _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
