Hello Alex,
thanks for the help, but it didn't work:
root@pinebook-pro:~# bluetoothctl
power on
No default controller available
root@pinebook-pro:~# inxi
--bluetooth
Bluetooth:
Device-1: rk3399-uart driver: dw_apb_uart
Report: btmgmt ID: hci0 state: up address: N/A
root@pinebook-pro:~#
I use BCM4345C5 from here https://github.com/armbian/firmware/blob/master/brcm/BCM4345C5.hcd putting it into the /usr/lib/firmware/brcm and after full shutdown it works. Reboot is not sufficient. Sometimes it shows that it's on and cannot find any device, but so is the wifi on Pinebook Pro, so you know, full shutdown and hope it works on next boot.
---
Best regards, Alex
On Friday, August 9th, 2024 at 12:06, Andreas Reschke <arm_ml@xxxxxxxxxxx> wrote:
Hello,
first: don't know if Bluetooth has worked before. If updated today the laptop and noticed Bluetooth isn't working.
dmesg | grep -i bluetooth missed 'brcm/BCM4345C5.hcd
After searching Internet I've found https://copr.fedorainfracloud.org/coprs/jwillikers/pinebook-pro and installed ap6256-firmware-2020.02-10.fc39.aarch64.rpm
No failure on
root@pinebook-pro:/home/andreas# dmesg | grep -i bluetooth
[ 54.157295] Bluetooth: Core ver 2.22
[ 54.168145] NET: Registered PF_BLUETOOTH protocol family
[ 54.168154] Bluetooth: HCI device and connection manager initialized
[ 54.168167] Bluetooth: HCI socket layer initialized
[ 54.168173] Bluetooth: L2CAP socket layer initialized
[ 54.168215] Bluetooth: SCO socket layer initialized
[ 54.375968] Bluetooth: HCI UART driver ver 2.3
[ 54.381603] Bluetooth: HCI UART protocol H4 registered
[ 54.387230] Bluetooth: HCI UART protocol BCSP registered
[ 54.418449] Bluetooth: HCI UART protocol LL registered
[ 54.420446] Bluetooth: HCI UART protocol ATH3K registered
[ 54.438694] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 54.438939] Bluetooth: HCI UART protocol Intel registered
[ 54.450367] Bluetooth: HCI UART protocol Broadcom registered
[ 54.450978] Bluetooth: HCI UART protocol QCA registered
[ 54.466370] Bluetooth: HCI UART protocol AG6XX registered
[ 54.481649] Bluetooth: HCI UART protocol Marvell registered
[ 54.871946] Bluetooth: hci0: BCM: chip id 130
[ 54.878835] Bluetooth: hci0: BCM: features 0x0f
[ 54.881103] Bluetooth: hci0: BCM4345C5
[ 54.881119] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0000
[ 54.915175] Bluetooth: hci0: BCM4345C5 'brcm/BCM4345C5.hcd' Patch
[ 55.863677] Bluetooth: hci0: BCM: features 0x0f
[ 55.889055] Bluetooth: hci0: BCM4345C5 Ampak_CL1.5 UART 37.4 MHz BT 5.0 [Version: Version: 0033.0080]
[ 55.889093] Bluetooth: hci0: BCM4345C5 (003.006.006) build 0080
[ 55.890379] Bluetooth: hci0: BCM: Using default device address (43:45:c5:00:1f:ac)
[ 57.583111] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 57.587702] Bluetooth: BNEP filters: protocol multicast
[ 57.592713] Bluetooth: BNEP socket layer initialized
root@pinebook-pro:~# rfkill | grep blue
1 bluetooth hci0 unblocked unblocked
root@pinebook-pro:~#
Bluetooth doesn't find any controller.
Greetings
Andreas
-- _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
