Hi, > > Hello together, hello Peter, > > > > I've on my Pinebook Pro U-Boot 2022.10. > > > > Howto: https://nullr0ute.com/2021/05/fedora-on-the-pinebook-pro/ > > > > Does it make sence to update U-Boot to up2date Version from Fedora 39 > > (uboot-images-armv8-2023-07-3.fc39.noarch) ? Are there any significant > > changes ? > > Whatever you decide, don't install 2023.10-rc3. It's broken. I still > haven't found the time to disassemble my PBP and put it into maskrom > mode to recover. I'll probably have some time next week and will try > to install 2023.10 final. So I finally got time to look into this on my PBP and what's happened is they're moved the offsets the u-boot.itb needs to be written. So if you do the following for the SPI flash rather than the previous one it should work: sf update ${fdt_addr_r} E0000 ${filesize} A nasty hack that may work is if you use the spi-flashing-disk to setup a mSD card with the same version that's on the SPI flash it may boot with that to a U-Boot prompt to save taking it to pieces. spi-flashing-disk --media=/dev/sda --target=pinebook-pro-rk3399 I am going to update the details in the blog post to cover this, also we can likely now move to a single command for flashing a combined blob in F-40. Note I've also discovered a bug in the U-Boot menu if booting off NVME, I am looking into that currently. Peter -- _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
