Hello,
today I've tried once again to install Fedora on Rock 5B.
It works !! Even with GUI!
What you need:
1)
https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.9.1/rock-5b_UEFI_Release_v0.9.1.img
dd this Image on a SD-Card
dd this Image on a USB stick
Put both in your Rock 5B and boot. I've done the Net-install installation with KDE Wayland. The SD-Card with UEFI is needed for booting. Don't know if it's possible to write it to the Firmware or somewhere else.
After a first check
not working:
- Sound
- Bluetooth
working
- Fan for CPU
- WIFI
- NVME
oot@rockpi5:~# lsblk -f
NAME FSTYPE FSVER LABEL UUID
FSAVAIL FSUSE% MOUNTPOINTS
zram0
[SWAP]
nvme0n1
├─nvme0n1p1 vfat FAT32 F81B-9757
588M 2% /boot/efi
├─nvme0n1p2 xfs
0fa12a00-a5e6-4063-b5d9-a6bbb8e5d324
711,5M 26% /boot
└─nvme0n1p3 LVM2_member LVM2 001
6X90NM-HSY9-mFxU-AmZs-aBwa-53sW-OeWx6m
├─fedora-root xfs
900a06a9-f39b-45ee-b088-439a4088693c
6,1G 59% /
└─fedora-homelv xfs
cc8dcc56-38ac-4ac2-9c0c-332b89044974
95,4G 5% /home
root@rockpi5:~# lspci
0000:01:00.0 Non-Volatile memory controller: Samsung Electronics
Co Ltd NVMe SSD Controller SM961/PM961/SM963
0002:01:00.0 Network controller: Realtek Semiconductor Co., Ltd.
Device b852
0004:01:00.0 Ethernet controller: Realtek Semiconductor Co.,
Ltd. RTL8125 2.5GbE Controller (rev 05)
root@rockpi5:~# lsmod | sort
bluetooth 897024 17
btrtl,btmtk,btintel,btbcm,bnep,btusb,rfcomm
bnep 32768 2
btbcm 24576 1 btusb
btintel 57344 1 btusb
btmtk 16384 1 btusb
btrtl 32768 1 btusb
btusb 77824 0
cfg80211 1073152 3 rtw89_8852b,rtw89_core,mac80211
crct10dif_ce 12288 1
dm_multipath 45056 0
fat 94208 1 vfat
fuse 180224 3
ghash_ce 20480 0
ip_set 61440 0
joydev 32768 0
libarc4 12288 1 mac80211
loop 36864 0
mac80211 1282048 2 rtw89_core,rtw89_pci
Module Size Used by
nf_conntrack 180224 2 nf_nat,nft_ct
nf_defrag_ipv4 12288 1 nf_conntrack
nf_defrag_ipv6 24576 1 nf_conntrack
nf_nat 57344 1 nft_chain_nat
nfnetlink 20480 3 nf_tables,ip_set
nf_reject_ipv4 16384 1 nft_reject_inet
nf_reject_ipv6 24576 1 nft_reject_inet
nf_tables 286720 391
nft_ct,nft_reject_inet,nft_fib_ipv6,nft_fib_ipv4,nft_chain_nat,nft_reject,nft_fib,nft_fib_inet
nft_chain_nat 12288 3
nft_ct 20480 7
nft_fib 12288 3
nft_fib_ipv6,nft_fib_ipv4,nft_fib_inet
nft_fib_inet 12288 1
nft_fib_ipv4 12288 1 nft_fib_inet
nft_fib_ipv6 12288 1 nft_fib_inet
nft_reject 12288 1 nft_reject_inet
nft_reject_inet 12288 16
nvme 57344 4
nvme_core 176128 5 nvme
ohci_hcd 61440 1 ohci_platform
ohci_platform 12288 0
polyval_ce 12288 0
polyval_generic 12288 1 polyval_ce
qrtr 45056 4
r8169 110592 0
rfcomm 98304 0
rfkill 40960 8 bluetooth,cfg80211
rtw89_8852b 368640 1 rtw89_8852be
rtw89_8852be 12288 0
rtw89_core 495616 2 rtw89_8852b,rtw89_pci
rtw89_pci 69632 1 rtw89_8852be
scsi_dh_alua 24576 0
scsi_dh_emc 12288 0
scsi_dh_rdac 16384 0
snd 131072 5 snd_seq,snd_seq_device,snd_timer
snd_hrtimer 12288 1
snd_seq 110592 7 snd_seq_dummy
snd_seq_device 16384 1 snd_seq
snd_seq_dummy 12288 0
snd_timer 49152 2 snd_seq,snd_hrtimer
soundcore 16384 1 snd
sunrpc 733184 1
uinput 24576 0
vfat 20480 1
xfs 2199552 3
xhci_plat_hcd 20480 0
zram 32768 2
root@rockpi5:~#
Don't know what driver for graphic is used. System isn't fast as
the Armbian version, but hey it's working.
Andreas
Thank you Peter,
so we have to wait. I will try it again at the end of the year.
Greetings
Andreas
Am 01.08.23 um 00:06 schrieb Peter Robinson:
Hi Andreas,_______________________________________________
So a quick look on upstream lists it doesn't look like USB [1] orIt's in my backlog of devices to play with for F-39.Hello Peter,
It looks like it's not finding the storage, you don't mention what
sort of storage you're trying to run Fedora from, is it the SD card or
do you have the firmware on SD and Fedora on something else?
Peter
UEFI is on SD-Card, Fedora iso is on USB-Stick, another empty USB-Stick
and NVME disc are available for storage.
either of the PCI controllers [2][3], there's two different ones, have
yet made it upstream as yet. so ATM without a custom kernel I wouldn't
expect it to work for either USB or NVME storage.
The patch set for the USB support isn't upstream yet and it'll only
support the upper USB3 port until they land another driver. On the
plus side it looks like both the pcie patch sets are headed towards
the 6.6 merge window.
Looking at upstream DTs for the Rock5B it looks like it's just the
mSD/eMMC storage that's enabled as of 6.5-rc4, it doesn't look like
even the ethernet works.
I think out of the box we probably won't be usable until F-40 for this
device. I have seen a lot posted upstream, it seems a lot of that
hasn't actually landed yet though.
Peter
[1] https://www.spinics.net/lists/linux-usb/msg244163.html
[2] https://www.spinics.net/lists/linux-pci/msg141988.html
[3] https://www.spinics.net/lists/linux-pci/msg141465.html
On Sun, 30 Jul 2023, 13:18 Andreas Reschke, <arm_ml@xxxxxxxxxxx>
wrote:
Hi there,https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b_UEFI_Release_v0.7.1.img
I've tried to install Fedora on my Rock 5 without success.
Booting with
on SD-Card and source fromhttps://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/aarch64/iso/Fedora-Everything-netinst-aarch64-Rawhide-20230730.n.0.iso.
Board boots up fine but later starting in loop withhttps://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
installer errors end ###############
[ 352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
timeout, still waiting for following initqueue hooks:
[ 352.161387] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh:
"[ -e
"/dev/root" ]"
[ 352.164564] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[
"$main_loop"
-ge "10" ]"
[ 352.167716] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
/tmp/settle.done ]"
[ 352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
starting timeout scripts
[ 352.172610] dracut-initqueue[1065]: Warning: #############
Anaconda
installer errors begin #############
[ 352.172852] dracut-initqueue[1065]: Warning: #
#
[ 352.173097] dracut-initqueue[1065]: Warning: It seems that the
boot
has failed. Possible causes include
[ 352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2
or
inst.repo boot parameters on the
[ 352.173537] dracut-initqueue[1065]: Warning: kernel cmdline.
Please
verify that you have specified
[ 352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or
inst.repo.
[ 352.173918] dracut-initqueue[1065]: Warning: Please also note
that
the 'inst.' prefix is now mandatory.
[ 352.174156] dracut-initqueue[1065]: Warning: #
#
[ 352.174354] dracut-initqueue[1065]: Warning: #### Installer
errors encountered during boot: ####
[ 352.174543] dracut-initqueue[1065]: Warning: #
#
[ 352.174775] dracut-initqueue[1065]: Warning: Reason unknown
[ 352.174970] dracut-initqueue[1065]: Warning: #
#
Full log file: see rock.txt
Has anybody more succcess ?
Greetings
Andreas_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
Do not reply to spam, report it:
https://pagure.io/fedora-infrastructure/new_issue
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
_______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
