Re: U-Boot testing request - 2023.10 series

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Hello, Peter.

On Saturday, 19 August 2023 at 19:53, Peter Robinson wrote:
> Hi Folks,
> The 2023.10 RC series are now landing in F-39 and rawhide. There's
> been the beginnings of a few enhancements.
> The first one that is noticeable is a bootmenu during the firmware
> init process where it will allow you to select the device/partition
> you wish to boot from, with the default selected and the usual time
> out. It should make things a little easier for things like
> reinstalling off a USB stick for devices that support that sort of
> install.
> I've done some testing across a bunch of devices, various RPi, the
> Pinebook pro and numerous SBCs so I think it should work just fine, at
> least be no different than the usual process but I'd like to hear any
> feedback.

I copied the Pinebook Pro u-boot binaries from
from /usr/share/uboot/pinebook-pro-rk3399/ to a μSD card (previously
formatted using spi-flashing disk script). Then I did the steps from "Write the
firmware to flash" section.

Unfortunately, after reset (or power-off/power-on cycle), I get this:
U-Boot SPL 2023.10-rc3 (Aug 21 2023 - 00:00:00 +0000)
Trying to boot from SPI
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
Trying to boot from SPI
Trying to boot from MMC2
Card did not respond to voltage select! : -110
spl: mmc init failed with error: -95
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

I checked the spi-flashing-disk script, and all it does is create a vfat
formatted partition and copy the 4 binaries from the directory
corresponding to the board model. I think I did everything correctly, so
is the new u-boot broken on PBP?

There should be a science of discontent. People need hard times and
oppression to develop psychic muscles.
        -- from "Collected Sayings of Muad'Dib" by the Princess Irulan
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct:
List Guidelines:
List Archives:
Do not reply to spam, report it:

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM (Vger)]     [Linux ARM]     [ARM Kernel]     [Fedora User Discussion]     [Older Fedora Users Discussion]     [Fedora Advisory Board]     [Fedora Security]     [Fedora Maintainers]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Mentors]     [Fedora Package Announce]     [Fedora Package Review]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Coolkey]     [Yum Users]     [Tux]     [Yosemite News]     [Linux Apps]     [KDE Users]     [Fedora Tools]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]

Powered by Linux