> So, I was able to install Fedora on the Pinebook Pro following the blog > post https://nullr0ute.com/2021/05/fedora-on-the-pinebook-pro/ > The only difference is that I was unable to boot the installer from an > USB stick, and I used dd to copy the content of the SD card to eMMC. > > The only annoying problem that I'm facing is that I can't reboot the > Pinebook. I can reboot, sure, indeed, connecting through the serial > port, the system actually reboot, but the video becomes black with some > horizontal lines [1]. > Powering off the system, then on, the screen is ok. > > What could it be? I've seen similar, but not quite the same issue. Basically mine gets stuck at some part of U-Boot and doesn't proceed to continue to boot. I believe it's a bug somewhere in the firmware but I've not had time to debug it. I suspect basically some device doesn't get reset properly by the firmware on reboot and so causes issues actually booting. It's one of the things on my todo list to investigate but I've not had the time to dig into it as yet. _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure
