On Fri, Jun 26, 2020 at 2:57 PM Nicolas Chauvet <kwizart@xxxxxxxxx> wrote: > > HI, > > FYI, I've found an issue with the current kernel 5.6.x (maybe earlier) > the as3722_regulator module isn't added by dracut in hostonly mode (it > is added as all others regulators) > > I need to add this: > cat >/etc/dracut.conf.d/jetson-tk1.conf<<EOF > add_drivers+=" as3722-regulator " > EOF > > This prevents the board to mount the rootfs in mmc or sda when the > initramfs is in host-only mode. So two questions: 1) when did this regress? 2) is it an issue with 5.7 (heading to f-32 RSN) or 5.8-rcX? > I've reported the issue to dracut upstream at > https://github.com/dracutdevs/dracut/issues/847 Why is this a dracut issue, it sounds like a module dep issue. > Now I wonder if other boards are affected by such regulators tweak and > if a common solution can be found ? We already pull all the regulator driver into the generic initrd, and regulator drivers should already be assessed by dracut when building the initrd if the kernel deps are right so I suspect there's a regression or some other change which has changed this, first step will be to work out the last known good kernel and work it out from there. Peter _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx