Hi Ben, > I've been trying without success to get the F32 Workstation RC1.6 (tomorrow's release) installed on my Pinebook Pro. If anyone here has done it, do you have instructions written up somewhere? I have done it but it's all from serial console so it doesn't make it an overly useful device. > One layer of trouble I've had is that the image apparently doesn't have the uboot files. The arm-image-installer script looks for them, AFAICT, in the image, so I called the installer with the PREFIX set to '', which was enough to get the install script to work, but the PBP doesn't boot from the SD card. The 1.6 release actually does have the uboot files, it's called pinebook-pro-rk3399, but we're going to need to flash it slightly differently. > I also used the 'rock64' target, which seems like it should be the right answer and not 'pinebook' (since the Pinebook uses a different board from the Pinebook Pro). But maybe that's part of my problem, too? It's not, the options are extremely device specific. To summarise where we are for everyone, with other deadlines I ran out of time to really polish this for F-32, it does actually boot on Fedora 32 but there's an issue with display output I've not got to the bottom of as yet. I'm hoping to catch up and I'll do a remix image with the fixes in so people can consume it easily. Once the screen is working any further enhancements we deliver in F-32 can be provided simply by the usual update mechanisms. Peter _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
