Hi, Thanks for the update. Are there any interest in adding rpi2/rpi3 support into update-uboot instead of having rpi-firmware-update? Regards, Hjalmarsson Den tis 7 jan. 2020 kl 23:00 skrev Paul Whalen <pwhalen@xxxxxxxxxx>: > > Hi Peter, > > ----- Original Message ----- > > Hi, > > > > The newly released arm-image-installer-2.15-1.fc31.noarch has some problems I > > like to point out with regards to raspberry pi and the newly introduced > > support for rock64. > > Lets start with rock64: > > Thanks, I merged the PR without looking at it closely, will be fixed on the next > release. > > > The boards.d file is named "rock64". This filename is supposed to match the > > folder name from uboot-images-armv8-2019.10-2.fc31.noarch, however that > > folder is named "rock64-rk3328". > > This results in the following: > > [root@localhost ~]# update-uboot --target=rock64-rk3328 --media=/dev/mmcblk0 > > /usr/bin/update-uboot: line 124: > > /usr/share/arm-image-installer/boards.d/rock64-rk3328: No such file or > > directory > > [root@localhost ~]# update-uboot --target=rock64 --media=/dev/mmcblk0 > > = No U-Boot files found for rock64. > > = Complete! > > ---- > > UGLYWORKAROUND: > > [root@localhost ~]# mv /usr/share/arm-image-installer/boards.d/rock64 > > /usr/share/arm-image-installer/boards.d/rock64-rk3328 > > [root@localhost ~]# update-uboot --target=rock64-rk3328 --media=/dev/mmcblk0 > > = Writing idbloader.img for rock64-rk3328 .... on media /dev/mmcblk0 > > 686+1 records in > > 686+1 records out > > 351280 bytes (351 kB, 343 KiB) copied, 0.105989 s, 3.3 MB/s > > = Writing u-boot FIT image for rock64-rk3328 .... on media /dev/mmcblk0 > > 1409+1 records in > > 1409+1 records out > > 721580 bytes (722 kB, 705 KiB) copied, 0.226429 s, 3.2 MB/s > > = Complete! > > --- > > > > Now for Raspberry Pi. > > This release dropped "rpi-uboot-update", which essentially took the > > corresponding raspberry pi uboot file files from uboot-images-armv8 and > > copied them to the correct location renaming to the correct name depending > > on if rpi2 or rpi3. > > The problem is that dropping this script removed the only "easy" way to > > update uboot for raspberry pi, since "update-uboot" has files for rpi2 and > > rpi3 which does nothing but setting the correct console-parameters. > > My proposal is to reintroduce "rpi-uboot-update" until update-uboot has > > information added for updating also the rpi2 and rpi3 unless there was a > > good reason for dropping this script? > > Will be readded next release which should be in koji shortly. Just waiting to > hear back about another issue and will do a build. > > Thanks for the feedback, apologies for the issues :) > > Paul > > > > > Best Regards, > > Peter Hjalmarsson > > _______________________________________________ > > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > > Fedora Code of Conduct: > > https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > > List Archives: > > https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx > > > _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
