Could you not grab the uboot and what nots from Ayufan, https://github.com/ayufan-rock64/linux-u-boot ( perhaps build and test ), my original build ( current ) used this method.. Nige On Thu, Nov 14, 2019 at 8:51 AM agharta82@xxxxxxxxx <agharta82@xxxxxxxxx> wrote: > > I'm seriously thinking that the problem is how u-boot images are created. > > I've searched inside usr/share/uboot/rockpro64-rk3399/ of sd-card, same > chip manufacturer. FYI all series of 3399 have same content (rock960, > rock-pi-4, roc, puma, orangepi, etc.. see usr/share/uboot filder). > > The content is here: > > idbloader.img > spl_sd.img > spl_spi.img > u-boot-dtb.img > u-boot-spl.bin > u-boot.bin > u-boot.dtb > u-boot.img > u-boot.itb > > > The rock64 content is different: > > idbloader.img > u-boot-dtb.img > u-boot-spl.bin > u-boot.bin > u-boot.dtb > u-boot.img > u-boot.itb > > Missing files: spl_sd.img, spl_spi.img > > > I think that the uboot build for rock64 was made only for eMMC module, > not for sd card. > > > How to known how uboot build was made? > > Where are the build sources? > > > Many thanks again, > > Agharta > > > > > > Il 13/11/19 16:41, agharta82@xxxxxxxxx ha scritto: > > I've found this thread: > > > > http://u-boot.10912.n7.nabble.com/help-with-serial-on-the-rockchip64-td384563.html > > > > > > Seems seek value for dd are correct. > > > > sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64 > > sudo dd if=u-boot.itb of=/dev/mmcblk0 seek=16384 > > > > The question is if idbloader was built dorm mmc or for sdcard too.... > > > > Mmm.... as soon as I've resolved serial spi boot problem I think I can > > tell You why Fedora does not boot. > > > > > > Regards, > > > > Agharta > > > > > > > > > > > > Il 13/11/19 13:58, Nigel Sollars ha scritto: > >> Yes the output I gave you in my first post is a Rock64 4GB with a 64GB > >> eMMC running Arch Linux. I can get you all the info you need when I > >> get back to the house. > >> > >> Nige > >> > >> On Wed, Nov 13, 2019 at 7:55 AM agharta82@xxxxxxxxx > >> <agharta82@xxxxxxxxx> wrote: > >>> Hi all, > >>> > >>> Many thanks Nigel, but nope. > >>> > >>> This is the output: > >>> > >>> C`Ek�kh[j�C4Mkj_C6�n�4��Vj-[mC`�d[�6��K��RV%���<U�5TU��]JU�BVU��꭫U�U���U�U > >>> ]��UեUQR����(�(��U*U�U��L�\� �ꨊ婪����ժ�)U�UQQ > >>> Q�ժw�UUQQQ���U�(J�*�(�U*�e�E��� > >>> U� �WE���i���+� � > >>> �UU(�UU�i+�*��*���Uj�*�E�*�J���BZ���U��.�ծ���������(���U��UTQQ���i-���U��UTQQ�%��(��u,�U�� > >>> > >>> > >>> Not good.... > >>> > >>> Benson, i would contribute to Pagure..... if something works! > >>> > >>> Actually I've found boot images of Rock64 inside fedora sdcard but I > >>> can't made them working. > >>> > >>> Nigel, do You have a Rock64 sbc? Does Your serial console works > >>> during SPI boot? > >>> > >>> > >>> Many thanks to both. > >>> > >>> Cheers, > >>> > >>> Agharta > >>> > >>> > >>> > >>> Il 13/11/19 04:49, Benson Muite ha scritto: > >>> > >>> On 11/13/19 2:29 AM, Nigel Sollars wrote: > >>> > >>> Serial console / uart setup, > >>> > >>> 1500000 8n1 > >>> > >>> Thanks Nigel. > >>> > >>> > >>> Nige > >>> > >>> Agharta, Please let us know if it works, and if so can you > >>> contribute to the Pagure repository? > >>> > >>> > >>> On Tue, Nov 12, 2019 at 2:08 PM agharta agharta > >>> <agharta82@xxxxxxxxx> wrote: > >>> > >>> Hi Benson, > >>> > >>> No, unfortunately seems not working. > >>> > >>> I've tried with seek (16348, 64, 512, etc). No luck. > >>> > >>> I think the problem is related how to boot images are builded. > >>> > >>> Should I write sidbloader.img? > >>> > >>> Following Your link about ARMv8, i see at row 3: > >>> > >>> dd if=$PREFIX/usr/share/uboot/$TARGET/spl.img of=$MEDIA seek=64; > >>> sync; sleep 5 > >>> > >>> But spl.img is not available in usr/share/uboot/ in my sdcard. > >>> > >>> So, I still searching over web. > >>> > >>> Meanwhile, did You known that serial console speed of > >>> > >>> > >>> > >>> Il 12/11/19 07:46, Benson Muite ha scritto: > >>> > >>> Hi Agharta, > >>> > >>> Thanks for the update. Responses below. Hope you are successful. > >>> > >>> Benson > >>> > >>> On 11/11/19 7:09 PM, agharta82@xxxxxxxxx wrote: > >>> > >>> Hi Benson, > >>> > >>> You helped me a lot!!! > >>> > >>> Following Your suggestion, I've investigate over $TARGET and $MEDIA. > >>> > >>> After writing sdcard with pine64-lts, inside usr/share/uboot/ (of > >>> sdcard) i can see rock64-rk3328 (my sbc), rockpro64-rk3399 and many > >>> other sbc not listed into arm-image-installer folder > >>> (/usr/share/arm-image-installer/boards.d/)!!!!!!!! > >>> > >>> So, rock64 is really supported by fedora (31, minimal, aarch64)!!! > >>> > >>> Another interesting thing: if I create a file called rock64-rk3328 > >>> into my /usr/share/arm-image-installer/boards.d/ and set > >>> --target=rock64-rk3328, arm-image-installer executes IT! > >>> > >>> So, next step: I've copied pine64-lts into rock64-rk3328. > >>> > >>> One question: rock64-rk3328 folder does not have sunxi-spl.bin, but > >>> a file called idbloader.img. Should I 'dd' it insead of sunxi-spl.bin? > >>> > >>> Following this link seems yes > >>> http://opensource.rock-chips.com/wiki_Boot_option > >>> > >>> Thanks, this seems helpful. > >>> > >>> Seems needed to add some extra stuffs too (seek): > >>> > >>> dd if=idbloader.img of=sdb seek=64 > >>> dd if=u-boot.itb of=sdb seek=16384 > >>> > >>> So, script become as follow: > >>> > >>> # write uboot > >>> echo "= Writing idbloader.img for $TARGET ...." > >>> dd if=$PREFIX/usr/share/uboot/$TARGET/sidbloader.img of=$MEDIA bs=8k > >>> seek=64; sync > >>> echo "= Writing u-boot FIT image for $TARGET ...." > >>> dd if=$PREFIX/usr/share/uboot/$TARGET/u-boot.itb of=$MEDIA bs=8k > >>> seek=16384; sync; sleep 5 > >>> # set console for allwinner > >>> SYSCON=ttyS0,115200 > >>> > >>> > >>> Looks similar to what is at: > >>> > >>> https://pagure.io/arm-image-installer/blob/master/f/socs.d/Rockchips-ARMv8 > >>> > >>> > >>> https://pagure.io/arm-image-installer/blob/master/f/socs.d/Rockchips-ARMv7 > >>> > >>> > >>> Might need to change seek value. I do not have that board, so cannot > >>> try this out, but hope it works. If it does work, can you contribute > >>> the script back? I believe additions are also needed here: > >>> > >>> https://pagure.io/arm-image-installer > >>> > >>> https://pagure.io/arm-image-installer/blob/master/f/boards.d > >>> > >>> Tomorrow I'll try! > >>> > >>> > >>> Thanks a lot for Your support. > >>> > >>> Best regards, > >>> > >>> Agharta > >>> > >>> > >>> > >>> Il 11/11/19 16:21, Benson Muite ha scritto: > >>> > >>> Hi Agharta, > >>> > >>> I used an earlier Fedora release on Banana pro (after first using > >>> Fedora combined with a different kernel). It worked ok, but took a > >>> bit of time for the Arm image to support Banana pro. > >>> > >>> On 11/11/19 4:04 PM, agharta82@xxxxxxxxx wrote: > >>> > >>> Hi Benson > >>> > >>> a) Yes, but I can't specify Rock64 as --target parameter. > >>> > >>> "A number of Pine64 boards are supported, but you might use as a > >>> bass to get something for rock64" Can You explain me how? Is it > >>> possibile without manual recompilation, etc...? (see why in b) and c) ) > >>> > >>> There was a message earlier on the list that support had been added > >>> for rock 64. Thus you might be able to take the configuration for > >>> Pine64 and modify that for Rock 64, though can also wait. After > >>> installing the arm image installer, as indicated at > >>> https://fedoraproject.org/wiki/Architectures/ARM/Installation in a > >>> terminal I can type > >>> > >>> $ls /usr/share/arm-image-installer/boards.d/ > >>> > >>> to get a listing of supported boards. Typing > >>> > >>> $more /usr/share/arm-image-installer/boards.d/pinebook > >>> > >>> gives settings for Pinebook, which are > >>> > >>> # write uboot > >>> echo "= Writing sunxi-spl.bin for $TARGET ...." > >>> dd if=$PREFIX/usr/share/uboot/$TARGET/sunxi-spl.bin of=$MEDIA bs=8k > >>> seek=1; sync > >>> echo "= Writing u-boot FIT image for $TARGET ...." > >>> dd if=$PREFIX/usr/share/uboot/$TARGET/u-boot.itb of=$MEDIA bs=8k > >>> seek=5; sync; sleep 5 > >>> # set console for allwinner > >>> SYSCON=ttyS0,115200 > >>> > >>> The commands for pine_h64, pine64_plus and pine64-lts are the same, > >>> so you might try these for your Rock 64. > >>> > >>> b) Yes, an Armbian kernel....but I'd like to use a 'standard' kernel. > >>> > >>> Ok. > >>> > >>> c) Yes, is possibile, but i still prefer a community delivered rpm > >>> (and maintained). > >>> > >>> Noted. Thanks for using and reporting where work is still required. > >>> Sorry cannot be much more help at present. > >>> > >>> Thanks again for Your support. > >>> > >>> Best regards, > >>> > >>> Agharta > >>> > >>> > >>> > >>> _______________________________________________ > >>> arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > >>> To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > >>> Fedora Code of Conduct: > >>> https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > >>> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > >>> List Archives: > >>> https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx > >>> > >>> > >>> > >> -- “Science is a differential equation. Religion is a boundary condition.” Alan Turing _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
