> I have a wandboard quad, and I'd like to move the root filesystem to a sata drive. I have the drive connected and formatted, and I copied all of "/" to a partition on the sata drive. For the wandboard you can actually have the entire OS on SATA. The only thing that needs to be on a SD card is U-Boot. So if you take a new image and DD it out to the sata device, then just dd out the U-Boot to a mSD card it should just all boot. > Now the question is "where do I need to change the UUID to match that of the new partition". > > I know I need to change /etc/fstab, /boot/extlinux/extlinux.conf and perhaps /boot/grub/grub.conf, but do I also have to regenerate the initramfs images, and if so, what command would I use so they contain the correct UUID and drivers? > > If I need to rebuild the initramfs, that would be a bit of a chicken and egg problem, because I would not be able to boot from the sata drive until I rebuilt it, but if I rebuilt it while running from the SD card, I'd guess the rebuilt initramfs would still reference the SD card. > > Steve > _______________________________________________ > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
