> Next step I'll just try and boot fc29s kernel... This was with rawhides > 4.20.0-0.rc5.git3.1.fc30.aarch64 kernel. > tried 4.18.6... still fails at __efi_rt_asm_wrapper EFI stub: Booting Linux Kernel... EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied EFI stub: Using DTB from configuration table EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 4.18.16-300.fc29.aarch64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 8.2.1 20180801 8 [ 0.000000] Machine model: Rockchip RK3328 EVB [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.70 by [ 0.000000] efi: SMBIOS=0xfbf1f000 [ 0.000000] cma: Reserved 64 MiB at 0x00000000f7000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000feffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xfef77780-0xfef84fff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000feffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000080f4fff] [ 0.000000] node 0: [mem 0x00000000080f5000-0x000000000810afff] [ 0.000000] node 0: [mem 0x000000000810b000-0x00000000fbf1efff] [ 0.000000] node 0: [mem 0x00000000fbf1f000-0x00000000fbf27fff] [ 0.000000] node 0: [mem 0x00000000fbf28000-0x00000000fef2ffff] [ 0.000000] node 0: [mem 0x00000000fef30000-0x00000000fef3ffff] [ 0.000000] node 0: [mem 0x00000000fef40000-0x00000000feffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000feffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s53528 r8192 d32488 u94208 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027656 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.16-300.fc29.aarch64 root=UUID=de1dc35e-0dc9-430c-a43a-a0cd5089c836 ro logl8 [ 0.000000] Memory: 3974004K/4175872K available (9980K kernel code, 1926K rwdata, 6664K rodata, 5760K init, 913K bss, 136332K reserv) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x40/0x4d0 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 37453 entries in 147 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] rockchip_mmc_get_phase: invalid clk rate [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001707] Console: colour dummy device 80x25 [ 0.002225] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.003211] pid_max: default: 32768 minimum: 301 [ 0.003833] Security Framework initialized [ 0.004227] Yama: becoming mindful. [ 0.004578] SELinux: Initializing. [ 0.007898] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010019] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010780] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.011455] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.014163] ASID allocator initialised with 32768 entries [ 0.014809] Hierarchical SRCU implementation. [ 0.019059] Remapping and enabling EFI services. [ 0.020111] smp: Bringing up secondary CPUs ... [ 0.021321] Detected VIPT I-cache on CPU1 [ 0.021390] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.022277] Detected VIPT I-cache on CPU2 [ 0.022340] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.023234] Detected VIPT I-cache on CPU3 [ 0.023296] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.023431] smp: Brought up 1 node, 4 CPUs [ 0.026801] SMP: Total of 4 processors activated. [ 0.027252] CPU features: detected: 32-bit EL0 Support [ 0.039841] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.040637] CPU: All CPU(s) started at EL2 [ 0.041050] alternatives: patching kernel code [ 0.044785] devtmpfs: initialized [ 0.055043] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.056017] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.060551] pinctrl core: initialized pinctrl subsystem [ 0.062352] SMBIOS 3.0 present. [ 0.062688] DMI: rockchip evb_rk3328/evb_rk3328, BIOS 2019.01-rc1-00169-ge11ef3d26e-dirty 12/16/2018 [ 0.064445] NET: Registered protocol family 16 [ 0.065474] audit: initializing netlink subsys (disabled) [ 0.066193] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1 [ 0.067663] cpuidle: using governor menu [ 0.068369] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) [ 0.069075] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.077773] DMA: preallocated 256 KiB pool for atomic allocations [ 0.078754] Serial: AMBA PL011 UART driver [ 0.108570] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.109658] cryptd: max_cpu_qlen set to 1000 [ 0.111114] ACPI: Interpreter disabled. [ 0.112586] vcc_sys: supplied by dc_12v [ 0.113802] vgaarb: loaded [ 0.114603] SCSI subsystem initialized [ 0.115534] usbcore: registered new interface driver usbfs [ 0.116105] usbcore: registered new interface driver hub [ 0.116727] usbcore: registered new device driver usb [ 0.117412] pps_core: LinuxPPS API ver. 1 registered [ 0.117885] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 0.118761] PTP clock support registered [ 0.119428] EDAC MC: Ver: 3.0.0 [ 0.120381] Registered efivars operations [ 0.120782] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 0.121611] Mem abort info: [ 0.121880] ESR = 0x86000006 [ 0.122173] Exception class = IABT (current EL), IL = 32 bits [ 0.122757] SET = 0, FnV = 0 [ 0.123051] EA = 0, S1PTW = 0 [ 0.123352] [0000000000000000] user address but active_mm is swapper [ 0.123956] Internal error: Oops: 86000006 [#1] SMP [ 0.124421] Modules linked in: [ 0.124723] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.18.16-300.fc29.aarch64 #1 [ 0.125431] Hardware name: rockchip evb_rk3328/evb_rk3328, BIOS 2019.01-rc1-00169-ge11ef3d26e-dirty 12/16/2018 [ 0.126378] pstate: 40000005 (nZcv daif -PAN -UAO) [ 0.126833] pc : (null) [ 0.127160] lr : __efi_rt_asm_wrapper+0x28/0x44 [ 0.127589] sp : ffff00000804bc00 [ 0.127905] x29: ffff00000804bc00 x28: 0000000000000000 [ 0.128415] x27: 0000000000000000 x26: ffff0000097bf000 [ 0.128925] x25: ffff00000992dad0 x24: 0000000000000001 [ 0.129434] x23: 0000000000000000 x22: ffff00000804bcf0 [ 0.129943] x21: ffff8000f5bd2c00 x20: ffff000008dedaa8 [ 0.130454] x19: ffff0000097c0240 x18: 0000000000000000 [ 0.130960] x17: 0000000000000000 x16: 0000000000000000 [ 0.131470] x15: 0000000000000010 x14: ffffffffffffffff [ 0.131980] x13: ffff00008986afd7 x12: ffff00000986afdf [ 0.132489] x11: ffff0000096a3000 x10: ffff00000804b9e0 [ 0.132998] x9 : 0000000000000000 x8 : 0000000000000000 [ 0.133506] x7 : 0000000000000000 x6 : ffff8000f5039000 [ 0.134015] x5 : 0000000000000000 x4 : ffff8000f5039000 [ 0.134524] x3 : 0000000000000000 x2 : ffff00000804bcf0 [ 0.135033] x1 : ffff8000f5bd2c00 x0 : ffff00000804bce8 [ 0.135545] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) [ 0.136179] Call trace: [ 0.136415] (null) [ 0.136706] virt_efi_get_next_variable+0x78/0xd0 [ 0.137157] efivar_init+0x98/0x300 [ 0.137498] efisubsys_init+0xd4/0x26c [ 0.137859] do_one_initcall+0x3c/0x1ac [ 0.138230] kernel_init_freeable+0x298/0x33c [ 0.138647] kernel_init+0x18/0x114 [ 0.138985] ret_from_fork+0x10/0x18 [ 0.139332] Code: bad PC value [ 0.139638] ---[ end trace 61176baca05f898f ]--- [ 0.140130] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.140130] [ 0.140998] SMP: stopping secondary CPUs [ 0.141380] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.141380] ]--- _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
