> I am also impatiently waiting for Fedora support on Rock64. I'm willing to > test things but I don't have the time to learn the precise magic required > to get from the existing U-Boot to booting Fedora. I took a stab at it > briefly, but other things have required my time so I've just been waiting > on for someone else to make it happen :) > > On Sat, Dec 8, 2018 at 2:34 AM mark co-dyre < > forwardbackwards(a)fedoraproject.org> wrote: As of right now I'm stuck here... if there's anything obvious that I should be focusing on please point it out and possibly recommend a tool to avenue I should start down in searching for a solution. DDR version 1.13 20180428 ID:0x805 N In LPDDR3 786MHz Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB ddrconfig:7 OUT Boot1 Release Time: Feb 2 2018 15:41:39, version: 2.46 ChipType = 0x11, 144 SdmmcInit=2 0 BootCapSize=0 UserCapSize=0MB FwPartOffset=2000 , 0 SdmmcInit=0 0 BootCapSize=0 UserCapSize=30436MB FwPartOffset=2000 , 0 StorageInit ok = 35976 Raw SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit ret = 0, SecureMode = 0 LoadTrustBL No find bl30.bin No find bl32.bin Load uboot, ReadLba = 2000 Load OK, addr=0x200000, size=0x92bd4 RunBL31 0x10000 NOTICE: BL31: v1.3(debug):9d3f591 NOTICE: BL31: Built : 14:39:02, Jan 17 2018 NOTICE: BL31:Rockchip release version: v1.3 INFO: ARM GICv2 driver initialized INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: plat_rockchip_pmu_init: pd status 0xe INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initiK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2019.01-rc1 (Dec 04 2018 - 16:09:21 +0000) Model: Rockchip RK3328 EVB DRAM: 4 GiB MMC: rksdmmc@ff500000: 1, rksdmmc@ff520000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Rockchip RK3328 EVB Net: Warning: ethernet@ff540000 (eth0) using random MAC address - 72:af:2b:fe:8b:98 eth0: ethernet@ff540000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found EFI removable media binary efi/fedora/grubaa64.efi Found DTB mmc 1:2 /dtb/rockchip/rk3328-evb.dtb 32498 bytes read in 3 ms (10.3 MiB/s) Scanning disk rksdmmc@xxxxxxxxxxxx... Card did not respond to voltage select! Scanning disk rksdmmc@xxxxxxxxxxxx... Disk rksdmmc@xxxxxxxxxxxx not ready Found 4 disks 1882872 bytes read in 88 ms (20.4 MiB/s) ## Starting EFI application at 02080000 ... Speed: 100, full duplex "Synchronous Abort" handler, esr 0x96000210 elr: fffffffffcf419b0 lr : fffffffffcf419a8 (reloc) elr: 00000000fbc799b0 lr : 00000000fbc799a8 x0 : 0000000000000000 x1 : 00000000fbb6ae56 x2 : 00000000ffffffff x3 : 00000000fbd718cc x4 : 00000000fbb6f080 x5 : 0000000000000020 x6 : 00000000fcf26538 x7 : 00000000fbb6be20 x8 : 0000000000000001 x9 : 0000000000000008 x10: 00000000fcf56070 x11: 00000000fcf56070 x12: 000000000000a3c0 x13: 0000000000000001 x14: 00000000fcf2686c x15: 00000000ffffffff x16: 0000000000001550 x17: 0000000000000000 x18: 00000000fcf2fdf8 x19: 0000000000000000 x20: 00000000fcf56130 x21: 00000000fef385c8 x22: 0000000000000000 x23: 0000000002080000 x24: 0000000000000003 x25: 0000000000000000 x26: 0000000000000000 x27: 0000000000000000 x28: 00000000fcf56010 x29: 00000000fcf26920 Resetting CPU ... _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
