----- Original Message ----- > I have a raspberry pi 3b+ and I have a few questions > > 1) I try to boot the Fedora 28 aarch64 raw image I run into an issue with the > " Rx: failed to receive: -5".. I believe someone has a bug report opened > already.. any idea on when this might be fixed? > > https://bugzilla.redhat.com/show_bug.cgi?id=1573261 > > I can only boot the armhfp release as of right now. I guess I'm just looking > for more detail about this issue. It will be fixed as soon as possible, unfortunately we don't have an ETA. You should be able to boot the aarch64 image, it just takes a while. Disconnecting the ethernet cable until the kernel is booted is likely the fastest option. > > 2) if I want to network boot and I can't use aarch64 because of the above > issue what could I use for the boot file for armhfp? I'm familiar with > booting x86 systems and you can typically use pxelinux.0 to start the > process. If you could provide a download link that would be great on > instructions on how to create the boot file would be fine. You need to create a folder named 'pxelinux.cfg' in your tftp directory and put a file named using the MAC address of the client, eg pxelinux.cfg/01-02-02-01-07-15-80, where the mac address is 02:02:01:07:15:80. If you run 'bootcmd_pxe' in Uboot you will see the file name it expects. => run bootcmd_pxe starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.0.215 (1005 ms) Using sms0 device TFTP from server 192.168.0.99; our IP address is 192.168.0.215 Filename 'pxelinux.0'. Load address: 0x82000000 Loading: ## 1.5 MiB/s done Bytes transferred = 26764 (688c hex) missing environment variable: pxeuuid Retrieving file: pxelinux.cfg/01-02-02-01-07-15-80 Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.0.99; our IP address is 192.168.0.215 Filename 'pxelinux.cfg/01-02-02-01-07-15-80'. Load address: 0x80100000 Loading: # 1.2 MiB/s done Bytes transferred = 12067 (2f23 hex) Config file found Rawhide Boot Options 1: Fedora 27 Final - Everything 2: Fedora-27 Final Server Kickstart Defaults 3: Fedora-27 Final Kickstart Minimal 4: Fedora-28-20180425.0 Everything 5: Fedora-28-20180425.0 Server Kickstart Defaults 6: Fedora-28-20180425.0 Kickstart Minimal Hopefully that helps! Paul > > thanks, Mike > > _______________________________________________ > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: > https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx/message/VABMK56XARO2SWHPJF4U6Y7UQMRFGBN4/ > _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx/message/E2QXN7FD7IRWQC2RPPS3D4RK5R7CHIQ7/
