On 05/17/2018 08:41 PM, Zamir SUN wrote: > > > On 05/16/2018 01:08 AM, Jeremy Linton wrote: >> Hi, >> >> On 05/14/2018 10:26 AM, Zamir SUN wrote: >>> Hi, >>> >>> Today I am trying my HikeyBoard (620) with >>> Fedora-Minimal-28-1.1.aarch64.raw.xz. It simply cannot boot. >> >> So, two quick questions. What firmware & version are you using, and have >> you tried booting one of the installer images? >> >> (I tend to use the server iso image, and have had a decent bit of luck >> with it). >> > > Thanks for the suggestions. > > I believe I haven't updated firmware after Fedora 27 released. I'll try > the installer way later when I have some time. > Hi Jeremy, I updated to the newest firmware on Linaro website[1]. But boot still stuck in "EFI stub: Exiting boot services and installing virtual address map...". I flashed the firmware from your github[2] and the dracut timeout error is still there. I am posting the console log from the UART here[3]. Addition note that might be useful: 1. The guide of flashing the firmware in[4] do not work for me. After flashing l-loader.bin I cannot flash ptable-*.img(it just hang there without any progress). When I see [5] I tried to flash the recovery.bin first then it works. 2. I cannot type in anything using minicon after system boot to anaconda text installer or dracut emergency shell. So I cannot install the system myself or trying to get more logs. However I can edit the grub menu via console, still not sure why. 3. I did not see anything special with earlycon=pl011,0xf7113000 configured. [1] https://releases.linaro.org/96boards/hikey/linaro/binaries/latest/ [2] https://github.com/jlinton/OpenPlatformPkg [3] https://paste.fedoraproject.org/paste/cchgFYr~5R6YbjfGm4ZgNg [4] https://github.com/96boards/documentation/wiki/HiKeyUEFI#flash-binaries-to-emmc- [5] https://www.96boards.org/documentation/consumer/hikey/installation/board-recovery.md.html So can you help with the second point (typing on console)? In that way I can at least debug more myself. >> >>> >>> I confirmed the xz image has the same hash as is shown on the mirror. >>> I. used the following command to write to my TF card. >>> xzcat Fedora-Minimal-28-1.1.aarch64.raw.xz | sudo dd status=progress >>> bs=4M of=/dev/mmcblk0 >>> >>> The system failed in dracut init queue timeout, with a warning "Warning: >>> /dev/disk/by-uuid/9a926ac9-5938-4539-bb79-72f87b36095f does not exist " >>> >>> However I confirmed the uuid is right for my partition. >>> >>> Besides, I cannot type anything via minicon to it so I cannot really >>> debug more right now. I am posting the last block of message via UART. >>> >>> So anyone have some hints for this? Thanks in advance! >>> >>> (P.S. Fedora 27 works fine on my hikey board). >>> >>> >>> [ 222.639468] dracut-initqueue[468]: Warning: dracut-initqueue timeout >>> - starts >>> [ 222.639909] dracut-initqueue[468]: Warning: Could not boot. >>> >>> Starting Setup Virtual Console... >>> >>> [ OK [ 222.716760] audit: type=1130 audit(1520288415.819:14): pid=1 >>> uid=0 au' >>> ] Started Setup [ 222.738436] audit: type=1131 >>> audit(1520288415.819:15): pid=1' >>> Virtual Console. >>> >>> Starting Dracut Emergency Shell... >>> >>> [ 222.825449] audit: type=1131 audit(1520288415.929:16): pid=1 uid=0 >>> auid=4294' >>> Warning: /dev/disk/by-uuid/9a926ac9-5938-4539-bb79-72f87b36095f does not >>> exist >>> >>> >>> Generating "/run/initramfs/rdsosreport.txt" >>> >>> [ 222.897318] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req >>> 400000H) >>> [ 222.956555] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req >>> 1000000) >>> [ 222.967237] print_req_error: 6 callbacks suppressed >>> >>> [ 222.967243] print_req_error: I/O error, dev mmcblk0, sector 1 >>> >>> [ 222.985808] print_req_error: I/O error, dev mmcblk0, sector 0 >>> >>> [ 222.991640] print_req_error: I/O error, dev mmcblk0, sector 1 >>> >>> [ 223.001405] Buffer I/O error on dev mmcblk0, logical block 0, async >>> page read >>> [ 223.032457] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req >>> 400000H) >>> [ 223.089436] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req >>> 1000000) >>> [ 223.100132] print_req_error: I/O error, dev mmcblk0, sector 1 >>> >>> [ 223.114267] print_req_error: I/O error, dev mmcblk0, sector 0 >>> >>> [ 223.120128] print_req_error: I/O error, dev mmcblk0, sector 1 >>> >>> [ 223.129994] Buffer I/O error on dev mmcblk0, logical block 0, async >>> page read >>> [ 223.176307] print_req_error: I/O error, dev mmcblk0, sector 0 >>> >>> [ 223.182146] print_req_error: I/O error, dev mmcblk0, sector 1 >>> >>> [ 223.211348] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req >>> 400000H) >>> [ 223.268935] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req >>> 1000000) >>> [ 223.279748] print_req_error: I/O error, dev mmcblk0, sector 1 >>> >>> [ 223.285597] print_req_error: I/O error, dev mmcblk0, sector 2 >>> >>> [ 223.313471] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req >>> 400000H) >>> [ 223.373025] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req >>> 1000000) >>> [ 223.442453] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req >>> 400000H) >>> [ 223.499139] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req >>> 1000000) >>> [ 223.533285] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req >>> 400000H) >>> [ 223.592543] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req >>> 1000000) >>> [ 223.663611] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req >>> 400000H) >>> [ 223.723301] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req >>> 1000000) >>> [ 223.757851] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req >>> 400000H) >>> [ 223.817927] mmc_host mmc0: Bus speed (slot 0) = 99200000Hz (slot req >>> 1000000) >>> >> > -- Ziqian SUN (Zamir) GPG : 1D86 6D4A 49CE 4BBD 72CF FCF5 D856 6E11 F2A0 525E Want to know more about Fedora? Visit https://fedoraproject.org/wiki/ Ready to contribute? See https://whatcanidoforfedora.org/ _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx/message/H3GDNO2JO4WMNVLGJTWNWB6KA5ZBPO6P/
