Just for those following this email, I installed the Fedora Beta LXDE
image on a RPI-3+, copied/modified the .dtb file, and booted with no
issues on boot. Used a USB-to-Ethernet adapter to run "dnf update",
which caused the onboard ethernet to start working. No trouble found so
far. Will keep updated as I continue to mess with this...
Geoff MarrIRC: coremodule
Geoff Marr
---------- Forwarded message ----------
From: Geoffrey Marr <gmarr@xxxxxxxxxx>
Date: Thu, Apr 5, 2018 at 10:26 AM
Subject: Re: [fedora-arm] Re: Raspberry Pi 3+
To: Eric Sandeen <sandeen@xxxxxxxxxx>
From: Geoffrey Marr <gmarr@xxxxxxxxxx>
Date: Thu, Apr 5, 2018 at 10:26 AM
Subject: Re: [fedora-arm] Re: Raspberry Pi 3+
To: Eric Sandeen <sandeen@xxxxxxxxxx>
Just for those following this email, I installed the Fedora Beta LXDE image on a RPI-3+, copied/modified the .dtb file, and booted with no issues on boot. Used a USB-to-Ethernet adapter to run "dnf update", which caused the onboard ethernet to start working. No trouble found so far. Will keep updated as I continue to mess with this...
Geoff Marr
IRC: coremoduleOn Mon, Apr 2, 2018 at 7:28 PM, Eric Sandeen <sandeen@xxxxxxxxxx> wrote:
On 4/2/18 7:05 PM, Peter Robinson wrote:
> On Mon, Apr 2, 2018 at 7:42 PM, Tomáš Frolík <tomas.frolik2@xxxxxxxxx> wrote:
>> Peter, I would like to as You, whether the onboard-wired-ethernet problem on RPi3+ was solved in current F28 test release (31.3.2018). If not, can You provide any indication when it could be?
>
> I don't know what you mean by "I would like to as You", please note
> that I provide the support for RPi in my own time as and when I have
> spare time.
>
> That said I did pull in some patches that should improve a bunch of
> things on the 3+but they're not in an official build just yet, you can
> get a scratch kernel [1] and report back whether they improved your
> situation. There's a couple of patches that might improve the wired
> lan but I've not currently got access to ethernet to test as I'm
> currently traveling.
>
> [1] https://koji.fedoraproject.org/koji/taskinfo?taskID=26121358
That kernel did fix the "mac address changes every reboot" for me.
And yes, the ethernet port does still work. ;)
Thanks!
And the ethernet port LEDS ... I seem to have a flashing amber
activity LED, and the green LED is off.
-Eric
_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@lists.fedoraproject.org
_______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
