On 7 November 2017 at 18:40, Tomasz Kłoczko <kloczko.tomasz@xxxxxxxxx> wrote: [..] > Generally dongle is working however when I'm trying to use it with > RPi3 using lsusb I see it as: > > Bus 001 Device 009: ID 0bda:8176 Realtek Semiconductor Corp. > RTL8188CUS 802.11n WLAN Adapter I must apologize. I had plugged in in one end of the usb hub tiny wifi dongle which was responsible for this line. Now on plug in this this new 802.11ac dongle in dmesg I see only: [root@rpi3 ~]# dmesg [ 168.367092] usb 1-1.4: new full-speed USB device number 13 using dwc2 [ 168.451090] usb 1-1.4: device descriptor read/64, error -32 [ 168.636097] usb 1-1.4: device descriptor read/64, error -32 [ 168.827104] usb 1-1.4: new full-speed USB device number 14 using dwc2 [ 168.911099] usb 1-1.4: device descriptor read/64, error -32 [ 169.100106] usb 1-1.4: device descriptor read/64, error -32 [ 169.291105] usb 1-1.4: new full-speed USB device number 15 using dwc2 [ 169.711119] usb 1-1.4: device not accepting address 15, error -32 [ 169.794122] usb 1-1.4: new full-speed USB device number 16 using dwc2 [ 170.215120] usb 1-1.4: device not accepting address 16, error -32 [ 170.221952] usb 1-1-port4: unable to enumerate USB device So situation is a bit different. Dongle: Bus 003 Device 099: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac 2T2R DB WLAN Adapter is not correctly initialized/detected. kloczek -- Tomasz Kłoczko | LinkedIn: http://lnkd.in/FXPWxH _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
