2017-05-23 1:06 GMT+02:00 Andrew Gillis <andrew@xxxxxxxxxxxxx>: > I am using an imx6 SoM from SolidRun. We have purchased a large number of > these and mostly they work fine. > > I tried to update to Fedora 25 and now a few of them won't boot. (most work > fine) > > All my SoMs are all supposed to be the same but some must be different. Both > worked fine with an older version of Fedora > > Is there any way to just force a boot from MMC1 with no checks? > > I tried to update to the u-boot from Fedora 26 just to see if that would > help. It does not. > > > This is what I get with the "bad" ones > > > U-Boot SPL 2016.09.01 (Oct 19 2016 - 14:40:29) > Trying to boot from unknown boot device > SPL: Unsupported Boot Device! > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### > > > The ones that boot correctly do this > > > U-Boot SPL 2016.09.01 (Oct 19 2016 - 14:40:29) > Trying to boot from MMC1 > > > U-Boot 2016.09.01 (Oct 19 2016 - 14:40:29 +0000) > > CPU: Freescale i.MX6DL rev1.3 996 MHz (running at 792 MHz) > CPU: Commercial temperature grade (0C to 95C) at 28C > Reset cause: POR > Board: MX6 Hummingboard > DRAM: 1 GiB > MMC: FSL_SDHC: 0 > *** Warning - bad CRC, using default environment It means that it's using the default environment because no custom env was ever saved. try (on the devices that do not boot) resetenv savenv -- - Nicolas (kwizart) _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx