Hi, Month ago I've been able successfully boot my pine64 on top of almost regular fedora resources: https://kloczek.wordpress.com/2017/04/04/work-in-progress-fedora-rawhide-on-pine64/ All what is really needed to add ATF patches to u-boot. As I've been a bit busy in last month I was not able to finish my uboot-tools.spec aftr it was updated to 2017.05 to propose necessary changes (will try to do this in next two weeks). Only other issue which I found are: 1) u-boot cannot boot out of regular vmlinuz and before reboot is necessary unpack it to uImage file and change entry in /boot/extlinux/extlinux.conf. If someone can provide some other way how to boot from vmlinuz I would be happy to see it 2) during boot is reported OOPS and I've reported it in https://bugzilla.redhat.com/show_bug.cgi?id=1440419 3) rtl8192cu eth driver seems has no possibility to pass in params MAC address and after each reboot and as long as someone will be using DHCP with dynamic IP assignment after each reboot pine will be with new IP. Nevertheless in last +week I was not able regularly update my pine64 and when I've done update yesterday I found that kernel 4.11.0-0.rc8.git4.1.fc27 and 4.11.0-1.fc27 no longer boots and last kernel which I have which is booting is 4.11.0-0.rc6.git3.1.fc27. Something introduced after 4.11.0-0.rc6.git3.1.fc27 now is causing that Fedora kernel no longer boots on pine64. Simple after loading kernel there is no even single line of kernel messages. kloczek -- Tomasz Kłoczko | LinkedIn: http://lnkd.in/FXPWxH _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
