And I used the xfs_growfs /dev/mmcblk0p4.... and that did nothing. I provided that as part of the first email that I sent.
On Wed, Apr 5, 2017 at 6:56 AM Paul Whalen <pwhalen@xxxxxxxxxx> wrote:
Hi Rafael,
----- Original Message -----
> Does the xfs_growfs not do that?
>
> The process on the wiki page only has the resize process.
>
> Thanks,
>From the wiki[1]:
# enlarge the 4th partition (this example uses mmcblk0)
growpart /dev/mmcblk0 4
# grow the fileystem to fill the available space
resize2fs /dev/mmcblk0p4
# for the server image (which uses xfs)
xfs_growfs /dev/mmcblk0p4
Paul
[1] - https://fedoraproject.org/wiki/Architectures/ARM/F26/Installation#FAQ
>
> Rafael
> On Wed, Apr 5, 2017 at 6:35 AM Peter Robinson < pbrobinson@xxxxxxxxx > wrote:
>
>
> On Tue, Apr 4, 2017 at 2:18 AM, Rafael Leiva-Ochoa < spawn@xxxxxxxxxxx >
> wrote:
> > Hi Everyone,
> >
> > I have a Raspberry Pi 3 running a 64GB card. After installing Fedora 25
> > Server, I tried using the xfs_growfs command to enlarge the partition. But,
> > it does not work. I have done this before on my other Pi's with no
> > problems.
> > Restarting did not help. Any ideas?
>
> Did you expand the partition first?
>
> PS re-forwarding the same email is not useful, you'll likely just get
> more ignored next time!
>
> > Here is the out of my Pi:
> >
> > [root@localhost ~]# df -H
> >
> > Filesystem Size Used Avail Use% Mounted on
> >
> > devtmpfs 451M 0 451M 0% /dev
> >
> > tmpfs 509M 13k 509M 1% /dev/shm
> >
> > tmpfs 509M 435k 509M 1% /run
> >
> > tmpfs 509M 0 509M 0% /sys/fs/cgroup
> >
> > /dev/mmcblk0p4 3.0G 2.1G 965M 68% /
> >
> > /dev/mmcblk0p2 479M 321M 144M 70% /boot
> >
> > tmpfs 102M 0 102M 0% /run/user/0
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]# lsblk
> >
> > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
> >
> > mmcblk0 179:0 0 59.5G 0 disk
> >
> > ├─mmcblk0p4 179:4 0 2.8G 0 part /
> >
> > ├─mmcblk0p2 179:2 0 488M 0 part /boot
> >
> > ├─mmcblk0p3 179:3 0 488M 0 part [SWAP]
> >
> > └─mmcblk0p1 179:1 0 29M 0 part
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]# xfs_growfs /dev/mmcblk0p4
> >
> > meta-data="" isize=512 agcount=4, agsize=183104 blks
> >
> > = sectsz=512 attr=2, projid32bit=1
> >
> > = crc=1 finobt=1 spinodes=0 rmapbt=0
> >
> > = reflink=0
> >
> > data = "" blocks=732416, imaxpct=25
> >
> > = sunit=0 swidth=0 blks
> >
> > naming =version 2 bsize=4096 ascii-ci=0 ftype=1
> >
> > log =internal bsize=4096 blocks=2560, version=2
> >
> > = sectsz=512 sunit=0 blks, lazy-count=1
> >
> > realtime =none extsz=4096 blocks=0, rtextents=0
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]#
> >
> > [root@localhost ~]# df -H
> >
> > Filesystem Size Used Avail Use% Mounted on
> >
> > devtmpfs 451M 0 451M 0% /dev
> >
> > tmpfs 509M 13k 509M 1% /dev/shm
> >
> > tmpfs 509M 435k 509M 1% /run
> >
> > tmpfs 509M 0 509M 0% /sys/fs/cgroup
> >
> > /dev/mmcblk0p4 3.0G 2.1G 965M 68% /
> >
> > /dev/mmcblk0p2 479M 321M 144M 70% /boot
> >
> > tmpfs 102M 0 102M 0% /run/user/0
> >
> > [root@localhost ~]#
> >
> >
> > Thanks,
> >
> >
> > Rafael
> >
> >
> > _______________________________________________
> > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
> > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
> >
>
> _______________________________________________
> arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
> To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
>
_______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx