Re: Raspberry PI 3 locking up

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Not trying to pry, but what did you find out? 

It locked up on me after it sat idle for a bit, then after I logged in and gnome started it froze. sitting at the login itself didn't seem to freeze it. 


The package solaar for my logitech k400 wireless keyboard, goes through the boot text then stops like it started the graphical interface on another device. Removing the package fixes it. 


Also do you happen to know where the system time is being picked up from initially? Every boot starts from july 25. It is a minor annoyance. 



Jul 25 15:50:31 raspi3 chronyd[685]: System clock wrong by 17015391.894310 seconds, adjustment started
Feb 07 13:20:23 raspi3 systemd[1]: Time has been changed





----- Original Message -----
From: Peter Robinson <pbrobinson@xxxxxxxxx>
To: Rafael Leiva-Ochoa <spawn@xxxxxxxxxxx>
Cc: Sean Omalley <omalley_s@xxxxxxxxxxxxxx>; Winfried de Heiden <wdh@xxxxxx>; "arm@xxxxxxxxxxxxxxxxxxxxxxx" <arm@xxxxxxxxxxxxxxxxxxxxxxx>
Sent: Tuesday, February 7, 2017 4:59 AM
Subject: Re: [fedora-arm] Re: Raspberry PI 3 locking up

On Tue, Feb 7, 2017 at 5:03 AM, Rafael Leiva-Ochoa <spawn@xxxxxxxxxxx> wrote:
> Any updates on this issue?

Two things on this:
1) I do the support for the Raspberry Pi in my own time when I have
the time and there's not other things more pressing. I have been
literally traveling for the last two weeks. Anyone is able to assist
with this.
2) If I've not explicitly sent an update or asked for people to test
there's probably not an update.

That said I worked on this until 2am and I think I've possibly got to
the cause of the problem and might have a short term solution to the
problem, Sadly it's going to need more work for 4.10 :-(

Based on 2) above I'll be replying to this thread when I have
something that people can actually test.


>  I can't seem to capture the kernel panic.
>
> On Fri, Feb 3, 2017 at 3:12 AM Peter Robinson <pbrobinson@xxxxxxxxx> wrote:
>>
>> On Fri, Feb 3, 2017 at 7:08 AM, Rafael Leiva-Ochoa <spawn@xxxxxxxxxxx>
>> wrote:
>> > Hi Peter, it locked up again with the 2.5 amp plug. No reaction from the
>> > keyboard or HDMI display.....
>>
>> I'm suspecting this is some type of thermal issue. I was home very
>> briefly and got two devices setup (I have around 6 various RPis) and
>> they both seemed to be OK, and the RPi3 wasn't hot to touch but in the
>> interim since I left it appears to have locked up so I'll have to look
>> at this closer when I get some spare cycles and am actually in the
>> same location as the devices.
>>
>> If someone can do some debug and identify which kernel it regressed (I
>> suspect when we moved to 4.9.x) it would help as at the moment I have
>> limited time to deal with this (It's a personal not $dayjob project).
>>
>> Peter
>>
>> > On Wed, Feb 1, 2017 at 11:44 PM Winfried de Heiden <wdh@xxxxxx> wrote:
>> >>
>> >> Hi all,
>> >>
>> >> Confirm:
>> >>
>> >> "...came back, and the monitor (tv in this case) was off, as it shuts
>> >> itself off after not getting a signal for x amount of time. The
>> >> keyboard
>> >> didn't respond to any input. The ssh session I had open locked up, and
>> >> I
>> >> couldn't connect to it on the IP address the router said it was
>> >> using..."
>> >>
>> >> Seems exactly the same for me :(
>> >>
>> >> Winfried
>> >>
>> >>
>> >> -----Oorspronkelijke bericht-----
>> >>
>> >> Datum: Wed, 1 Feb 2017 23:54:25 +0000 (UTC)
>> >> Onderwerp: [fedora-arm] Re: Raspberry PI 3 locking up
>> >> Cc: arm@xxxxxxxxxxxxxxxxxxxxxxx <arm@xxxxxxxxxxxxxxxxxxxxxxx>
>> >> Aan: Rafael Leiva-Ochoa <spawn@xxxxxxxxxxx>, Peter Robinson
>> >> <pbrobinson@xxxxxxxxx>, Winfried de Heiden <wdh@xxxxxx>
>> >> Reply-to: Sean Omalley <omalley_s@xxxxxxxxxxxxxx>
>> >> Van: Sean Omalley <omalley_s@xxxxxxxxxxxxxx>
>> >>
>> >> I have a 2.5amp power supply too. It stopped responding twice since I
>> >> have
>> >> updated (which took around 10 hours.)
>> >>
>> >>
>> >> I went to dinner and came back, and the monitor (tv in this case) was
>> >> off,
>> >> as it shuts itself off after not getting a signal for x amount of time.
>> >> The
>> >> keyboard didn't respond to any input. The ssh session I had open locked
>> >> up,
>> >> and I couldn't connect to it on the IP address the router said it was
>> >> using.
>> >> (it keeps incrementing, which is annoying and strange in it's own
>> >> right.)
>> >> This is the last part of that log.
>> >>
>> >>
>> >> It is connected to the network via a wireless dongle. But I didn't have
>> >> issues with that adapter on x86 when I had other network issues with
>> >> the
>> >> built-in adapter.
>> >>
>> >>
>> >> Feb 01 17:43:39 unknownc83a35b012e1.attlocal.net NetworkManager[742]:
>> >> <info>  [1485989019.9453] manager: NetworkManager state is now
>> >> CONNECTED_SITE
>> >> Feb 01 17:43:39 unknownc83a35b012e1.attlocal.net dbus-daemon[686]:
>> >> [system] Activating via systemd: service
>> >> name='org.freedesktop.nm_dispatcher'
>> >> unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.9'
>> >> (uid=0
>> >> pid=742 comm="/usr/sbin/NetworkManager --no-daemon "
>> >> label="system_u:system_r:NetworkManager_t:s0")
>> >> Feb 01 17:43:39 unknownc83a35b012e1.attlocal.net systemd[1]: tmp.mount:
>> >> Cannot add dependency job, ignoring: Unit tmp.mount is masked.
>> >> Feb 01 17:43:39 unknownc83a35b012e1.attlocal.net systemd[1]: Starting
>> >> Network Manager Script Dispatcher Service...
>> >> Feb 01 17:43:40 unknownc83a35b012e1.attlocal.net kernel:
>> >> alloc_contig_range: [21fdc, 21fe0) PFNs busy
>> >> Feb 01 17:43:40 unknownc83a35b012e1.attlocal.net kernel:
>> >> alloc_contig_range: [220c0, 220c4) PFNs busy
>> >> Feb 01 17:43:40 unknownc83a35b012e1.attlocal.net kernel:
>> >> alloc_contig_range: [220c4, 220c8) PFNs busy
>> >> Feb 01 17:43:40 unknownc83a35b012e1.attlocal.net dbus-daemon[686]:
>> >> [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
>> >> Feb 01 17:43:40 unknownc83a35b012e1.attlocal.net audit[1]:
>> >> SERVICE_START
>> >> pid=1 uid=0 auid=4294967295 ses=4294967295
>> >> subj=system_u:system_r:init_t:s0
>> >> msg='unit=NetworkManager-dispatcher comm="systemd"
>> >> exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
>> >> res=success'
>> >> Feb 01 17:43:40 unknownc83a35b012e1.attlocal.net systemd[1]: Started
>> >> Network Manager Script Dispatcher Service.
>> >> Feb 01 17:43:40 unknownc83a35b012e1.attlocal.net nm-dispatcher[2019]:
>> >> req:1 'connectivity-change': new request (5 scripts)
>> >> Feb 01 17:43:40 unknownc83a35b012e1.attlocal.net nm-dispatcher[2019]:
>> >> req:1 'connectivity-change': start running ordered scripts...
>> >> Feb 01 17:43:50 unknownc83a35b012e1.attlocal.net audit[1]: SERVICE_STOP
>> >> pid=1 uid=0 auid=4294967295 ses=4294967295
>> >> subj=system_u:system_r:init_t:s0
>> >> msg='unit=NetworkManager-dispatcher comm="systemd"
>> >> exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
>> >> res=success'
>> >> Feb 01 17:44:25 unknownc83a35b012e1.attlocal.net NetworkManager[742]:
>> >> <info>  [1485989065.1881] manager: NetworkManager state is now
>> >> CONNECTED_GLOBAL
>> >> Feb 01 17:44:25 unknownc83a35b012e1.attlocal.net dbus-daemon[686]:
>> >> [system] Activating via systemd: service
>> >> name='org.freedesktop.nm_dispatcher'
>> >> unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.9'
>> >> (uid=0
>> >> pid=742 comm="/usr/sbin/NetworkManager --no-daemon "
>> >> label="system_u:system_r:NetworkManager_t:s0")
>> >> Feb 01 17:44:25 unknownc83a35b012e1.attlocal.net systemd[1]: tmp.mount:
>> >> Cannot add dependency job, ignoring: Unit tmp.mount is masked.
>> >> Feb 01 17:44:25 unknownc83a35b012e1.attlocal.net systemd[1]: Starting
>> >> Network Manager Script Dispatcher Service...
>> >> Feb 01 17:44:25 unknownc83a35b012e1.attlocal.net dbus-daemon[686]:
>> >> [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
>> >> Feb 01 17:44:25 unknownc83a35b012e1.attlocal.net audit[1]:
>> >> SERVICE_START
>> >> pid=1 uid=0 auid=4294967295 ses=4294967295
>> >> subj=system_u:system_r:init_t:s0
>> >> msg='unit=NetworkManager-dispatcher comm="systemd"
>> >> exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
>> >> res=success'
>> >> Feb 01 17:44:25 unknownc83a35b012e1.attlocal.net nm-dispatcher[2039]:
>> >> req:1 'connectivity-change': new request (5 scripts)
>> >> Feb 01 17:44:25 unknownc83a35b012e1.attlocal.net systemd[1]: Started
>> >> Network Manager Script Dispatcher Service.
>> >> Feb 01 17:44:25 unknownc83a35b012e1.attlocal.net nm-dispatcher[2039]:
>> >> req:1 'connectivity-change': start running ordered scripts...
>> >> Feb 01 17:44:35 unknownc83a35b012e1.attlocal.net audit[1]: SERVICE_STOP
>> >> pid=1 uid=0 auid=4294967295 ses=4294967295
>> >> subj=system_u:system_r:init_t:s0
>> >> msg='unit=NetworkManager-dispatcher comm="systemd"
>> >> exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
>> >> res=success'
>> >> Feb 01 18:01:01 unknownc83a35b012e1.attlocal.net CROND[2082]: (root)
>> >> CMD
>> >> (run-parts /etc/cron.hourly)
>> >> Feb 01 18:01:02 unknownc83a35b012e1.attlocal.net run-parts[2085]:
>> >> (/etc/cron.hourly) starting 0anacron
>> >> Feb 01 18:01:02 unknownc83a35b012e1.attlocal.net run-parts[2091]:
>> >> (/etc/cron.hourly) finished 0anacron
>> >>
>> >>
>> >>
>> >> ________________________________
>> >> From: Rafael Leiva-Ochoa <spawn@xxxxxxxxxxx>
>> >> To: Peter Robinson <pbrobinson@xxxxxxxxx>; Winfried de Heiden
>> >> <wdh@xxxxxx>
>> >> Cc: arm@xxxxxxxxxxxxxxxxxxxxxxx
>> >> Sent: Wednesday, February 1, 2017 5:04 PM
>> >> Subject: [fedora-arm] Re: Raspberry PI 3 locking up
>> >>
>> >>
>> >>
>> >>  I will try my 2.5 amp power supply tonight.  If I still see the same
>> >> problems I will go ahead and respond back to the same email.
>> >>
>> >> On Wed, Feb 1, 2017 at 11:41 AM Winfried de Heiden <wdh@xxxxxx> wrote:
>> >>
>> >> Hi all,
>> >>
>> >>
>> >> Double checked: 2.5A power supply.Winfried
>> >>
>> >>
>> >> Op 01-02-17 om 13:58 schreef Winfried de Heiden:
>> >>
>> >> Hi all,
>> >>
>> >>
>> >>
>> >> I don't know by head but it should be enough; it worked for weeks and
>> >> it
>> >> is sold as "the official PI power supply".
>> >>
>> >>
>> >> I'll check tonight to be shure.
>> >>
>> >>
>> >> Winfried
>> >>
>> >>
>> >> -----Oorspronkelijke bericht-----
>> >>
>> >>
>> >> Datum: Wed, 1 Feb 2017 11:27:45 +0000
>> >> Onderwerp: [fedora-arm] Re: Raspberry PI 3 locking up
>> >> Cc: arm@xxxxxxxxxxxxxxxxxxxxxxx, Rafael Leiva-Ochoa <spawn@xxxxxxxxxxx>
>> >> Aan: Winfried de Heiden <wdh@xxxxxx>
>> >> Van: Peter Robinson <pbrobinson@xxxxxxxxx>
>> >> On Wed, Feb 1, 2017 at 7:52 AM, Winfried de Heiden <wdh@xxxxxx> wrote:
>> >> Hi all, Same for me, since a couple of days the Rapsbery Pi 3 suddenly
>> >> stops. One or
>> >>
>> >>
>> >> two time I was quick enough to catch a kernel panic on the screen.
>> >> Looks
>> >> like a kernel thing to me. I moved the SD-card to my " old"  Raspberry
>> >> Pi 2 (two), the same installation is running fine for a couple of days.
>> >> What is the AMP rating of your power supplies?
>> >>
>> >>
>> >> Screen shot of the kernel panic attached. I think I' ll create a
>> >> bugzilla
>> >> on
>> >>
>> >>
>> >> this. Winfried Op wo, 1 feb 2017 om 1:26 , schreef Rafael Leiva-Ochoa
>> >> <spawn@xxxxxxxxxxx>: Hi Everyone, I've been running a raspberry pi 3
>> >> with
>> >> Fedora release 25 (Twenty Five)
>> >> using kernal 4.9.6-200.fc25.armv7hl, and I have been noticing for the
>> >> last
>> >> 2
>> >> weeks that my Pi locks up. I tried hooking it up to an HDMI monitor,
>> >> and
>> >> USB
>> >> keyboard to see if the system generates any message, but I only get a
>> >> blank
>> >> screen and no reaction from the keyboard. I have looked at the
>> >> /var/log/message, and dmesg, and I don't see anything that could be
>> >> causing
>> >> the problem. I was thinking it could be overheating, but Fedara 25 does
>> >> not
>> >> support any of the rasbian commands to run heat sensor checks. Any
>> >> ideas?
>> >> Thanks, Rafael _______________________________________________
>> >> arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an
>> >> email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
>> >> _______________________________________________
>> >> arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an
>> >> email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
>> >>
>> >>
>> >>
>> >>
>> >> _______________________________________________
>> >>
>> >>
>> >> arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an
>> >> email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
>> >>
>> >>
>> >>
>> >>
>> >> _______________________________________________
>> >> arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
>> >> To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
>> >> _______________________________________________
>> >> arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
>> >> To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM (Vger)]     [Linux ARM]     [ARM Kernel]     [Fedora User Discussion]     [Older Fedora Users Discussion]     [Fedora Advisory Board]     [Fedora Security]     [Fedora Maintainers]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Mentors]     [Fedora Package Announce]     [Fedora Package Review]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Coolkey]     [Yum Users]     [Tux]     [Yosemite News]     [Linux Apps]     [KDE Users]     [Fedora Tools]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]

Powered by Linux