Following guide on https://fedoraproject.org/wiki/Architectures/ARM/F25/Installation#For_Versatile_Express_Emulation_with_QEMU. Used images: Fedora-Minimal-armhfp-25-1.3-sda.raw Fedora-Minimal-armhfp-25-20161117.n.0-sda.raw Guest fails to boot with messages below. Please advise. [ OK ] Mounted Configuration File System. [ 32.037543] ------------[ cut here ]------------ [ 32.038282] WARNING: CPU: 0 PID: 383 at drivers/irqchip/irq-gic-common.c:80 gic_configure_irq+0x78/0xac [ 32.039013] Modules linked in: virtio_net(+) virtio_scsi(+) virtio_mmio virtio_ring virtio scsi_transport_iscsi [ 32.040259] CPU: 0 PID: 383 Comm: systemd-udevd Not tainted 4.8.6-300.fc25.armv7hl #1 [ 32.040813] Hardware name: Generic DT based system [ 32.041978] [<c02192f4>] (unwind_backtrace) from [<c0214108>] (show_stack+0x18/0x1c) [ 32.042647] [<c0214108>] (show_stack) from [<c0516624>] (dump_stack+0x80/0x9c) [ 32.043157] [<c0516624>] (dump_stack) from [<c0254f10>] (__warn+0xe4/0x104) [ 32.043689] [<c0254f10>] (__warn) from [<c0254fec>] (warn_slowpath_null+0x24/0x2c) [ 32.044163] [<c0254fec>] (warn_slowpath_null) from [<c0545188>] (gic_configure_irq+0x78/0xac) [ 32.044677] [<c0545188>] (gic_configure_irq) from [<c02abe54>] (__irq_set_trigger+0x7c/0x178) [ 32.045185] [<c02abe54>] (__irq_set_trigger) from [<c02ac448>] (__setup_irq+0x4f8/0x5b8) [ 32.045750] [<c02ac448>] (__setup_irq) from [<c02ac678>] (request_threaded_irq+0xbc/0x174) [ 32.046719] [<c02ac678>] (request_threaded_irq) from [<bf062758>] (vm_find_vqs+0x4c/0x2f8 [virtio_mmio]) [ 32.047501] [<bf062758>] (vm_find_vqs [virtio_mmio]) from [<bf0a2ca0>] (virtscsi_init+0xc8/0x1d0 [virtio_scsi]) [ 32.048125] [<bf0a2ca0>] (virtscsi_init [virtio_scsi]) from [<bf0a2e90>] (virtscsi_probe+0xe8/0x2d8 [virtio_scsi]) [ 32.048915] [<bf0a2e90>] (virtscsi_probe [virtio_scsi]) from [<bf0226e0>] (virtio_dev_probe+0x114/0x220 [virtio]) [ 32.049706] [<bf0226e0>] (virtio_dev_probe [virtio]) from [<c0630318>] (driver_probe_device+0x1d0/0x3e8) [ 32.050283] [<c0630318>] (driver_probe_device) from [<c06305b8>] (__driver_attach+0x88/0xf8) [ 32.050849] [<c06305b8>] (__driver_attach) from [<c062e5b0>] (bus_for_each_dev+0x84/0x94) [ 32.051417] [<c062e5b0>] (bus_for_each_dev) from [<c062f7dc>] (bus_add_driver+0x180/0x234) [ 32.051957] [<c062f7dc>] (bus_add_driver) from [<c0631134>] (driver_register+0xa8/0xe8) [ 32.052506] [<c0631134>] (driver_register) from [<bf0a809c>] (init+0x9c/0x1000 [virtio_scsi]) [ 32.053107] [<bf0a809c>] (init [virtio_scsi]) from [<c0209d48>] (do_one_initcall+0x130/0x158) [ 32.053689] [<c0209d48>] (do_one_initcall) from [<c034b188>] (do_init_module+0x60/0x1d8) [ 32.054201] [<c034b188>] (do_init_module) from [<c02d7950>] (load_module+0x1ae4/0x2120) [ 32.054774] [<c02d7950>] (load_module) from [<c02d81a0>] (SyS_finit_module+0x94/0xc0) [ 32.055317] [<c02d81a0>] (SyS_finit_module) from [<c020fb80>] (ret_fast_syscall+0x0/0x3c) [ 32.055973] ---[ end trace 8580c707e4338642 ]--- [ 32.056360] genirq: Setting trigger mode 1 for irq 51 failed (gic_set_type+0x0/0x6c) [ 32.064328] ------------[ cut here ]------------ [ 32.064759] WARNING: CPU: 0 PID: 381 at drivers/irqchip/irq-gic-common.c:80 gic_configure_irq+0x78/0xac [ 32.065372] Modules linked in: virtio_net(+) virtio_scsi(+) virtio_mmio virtio_ring virtio scsi_transport_iscsi [ 32.066367] CPU: 0 PID: 381 Comm: systemd-udevd Tainted: G W 4.8.6-300.fc25.armv7hl #1 [ 32.066987] Hardware name: Generic DT based system [ 32.067330] [<c02192f4>] (unwind_backtrace) from [<c0214108>] (show_stack+0x18/0x1c) [ 32.067872] [<c0214108>] (show_stack) from [<c0516624>] (dump_stack+0x80/0x9c) [ 32.068397] [<c0516624>] (dump_stack) from [<c0254f10>] (__warn+0xe4/0x104) [ 32.068883] [<c0254f10>] (__warn) from [<c0254fec>] (warn_slowpath_null+0x24/0x2c) [ 32.069390] [<c0254fec>] (warn_slowpath_null) from [<c0545188>] (gic_configure_irq+0x78/0xac) [ 32.069826] [<c0545188>] (gic_configure_irq) from [<c02abe54>] (__irq_set_trigger+0x7c/0x178) [ 32.070217] [<c02abe54>] (__irq_set_trigger) from [<c02ac448>] (__setup_irq+0x4f8/0x5b8) [ 32.070636] [<c02ac448>] (__setup_irq) from [<c02ac678>] (request_threaded_irq+0xbc/0x174) [ 32.071086] [<c02ac678>] (request_threaded_irq) from [<bf062758>] (vm_find_vqs+0x4c/0x2f8 [virtio_mmio]) [ 32.071618] [<bf062758>] (vm_find_vqs [virtio_mmio]) from [<bf0ad934>] (init_vqs+0x1f0/0x3a8 [virtio_net]) [ 32.072160] [<bf0ad934>] (init_vqs [virtio_net]) from [<bf0af3fc>] (virtnet_probe+0x524/0x890 [virtio_net]) [ 32.072687] [<bf0af3fc>] (virtnet_probe [virtio_net]) from [<bf0226e0>] (virtio_dev_probe+0x114/0x220 [virtio]) [ 32.073218] [<bf0226e0>] (virtio_dev_probe [virtio]) from [<c0630318>] (driver_probe_device+0x1d0/0x3e8) [ 32.073712] [<c0630318>] (driver_probe_device) from [<c06305b8>] (__driver_attach+0x88/0xf8) [ 32.074111] [<c06305b8>] (__driver_attach) from [<c062e5b0>] (bus_for_each_dev+0x84/0x94) [ 32.074489] [<c062e5b0>] (bus_for_each_dev) from [<c062f7dc>] (bus_add_driver+0x180/0x234) [ 32.074927] [<c062f7dc>] (bus_add_driver) from [<c0631134>] (driver_register+0xa8/0xe8) [ 32.075347] [<c0631134>] (driver_register) from [<c0209d48>] (do_one_initcall+0x130/0x158) [ 32.075795] [<c0209d48>] (do_one_initcall) from [<c034b188>] (do_init_module+0x60/0x1d8) [ 32.076222] [<c034b188>] (do_init_module) from [<c02d7950>] (load_module+0x1ae4/0x2120) [ 32.076631] [<c02d7950>] (load_module) from [<c02d81a0>] (SyS_finit_module+0x94/0xc0) [ 32.076991] [<c02d81a0>] (SyS_finit_module) from [<c020fb80>] (ret_fast_syscall+0x0/0x3c) [ 32.077356] ---[ end trace 8580c707e4338643 ]--- [ 32.077629] genirq: Setting trigger mode 1 for irq 50 failed (gic_set_type+0x0/0x6c) [ 32.127129] virtio_net: probe of virtio0 failed with error -22 [ 32.153173] ------------[ cut here ]------------ [ 32.153554] WARNING: CPU: 0 PID: 383 at kernel/irq/manage.c:1478 __free_irq+0xb0/0x29c [ 32.154061] Trying to free already-free IRQ 51 [ 32.154322] Modules linked in: virtio_net virtio_scsi(+) virtio_mmio virtio_ring virtio scsi_transport_iscsi [ 32.154940] CPU: 0 PID: 383 Comm: systemd-udevd Tainted: G W 4.8.6-300.fc25.armv7hl #1 [ 32.155355] Hardware name: Generic DT based system [ 32.155677] [<c02192f4>] (unwind_backtrace) from [<c0214108>] (show_stack+0x18/0x1c) [ 32.156110] [<c0214108>] (show_stack) from [<c0516624>] (dump_stack+0x80/0x9c) [ 32.156676] [<c0516624>] (dump_stack) from [<c0254f10>] (__warn+0xe4/0x104) [ 32.157107] [<c0254f10>] (__warn) from [<c0254f6c>] (warn_slowpath_fmt+0x3c/0x4c) [ 32.157590] [<c0254f6c>] (warn_slowpath_fmt) from [<c02aae98>] (__free_irq+0xb0/0x29c) [ 32.158048] [<c02aae98>] (__free_irq) from [<c02ab138>] (free_irq+0x64/0x70) [ 32.158490] [<c02ab138>] (free_irq) from [<bf0a2d5c>] (virtscsi_init+0x184/0x1d0 [virtio_scsi]) [ 32.158990] [<bf0a2d5c>] (virtscsi_init [virtio_scsi]) from [<bf0a2e90>] (virtscsi_probe+0xe8/0x2d8 [virtio_scsi]) [ 32.159630] [<bf0a2e90>] (virtscsi_probe [virtio_scsi]) from [<bf0226e0>] (virtio_dev_probe+0x114/0x220 [virtio]) [ 32.160294] [<bf0226e0>] (virtio_dev_probe [virtio]) from [<c0630318>] (driver_probe_device+0x1d0/0x3e8) [ 32.160818] [<c0630318>] (driver_probe_device) from [<c06305b8>] (__driver_attach+0x88/0xf8) [ 32.161295] [<c06305b8>] (__driver_attach) from [<c062e5b0>] (bus_for_each_dev+0x84/0x94) [ 32.161772] [<c062e5b0>] (bus_for_each_dev) from [<c062f7dc>] (bus_add_driver+0x180/0x234) [ 32.162247] [<c062f7dc>] (bus_add_driver) from [<c0631134>] (driver_register+0xa8/0xe8) [ 32.162718] [<c0631134>] (driver_register) from [<bf0a809c>] (init+0x9c/0x1000 [virtio_scsi]) [ 32.163160] [<bf0a809c>] (init [virtio_scsi]) from [<c0209d48>] (do_one_initcall+0x130/0x158) [ 32.163633] [<c0209d48>] (do_one_initcall) from [<c034b188>] (do_init_module+0x60/0x1d8) [ 32.164122] [<c034b188>] (do_init_module) from [<c02d7950>] (load_module+0x1ae4/0x2120) [ 32.164576] [<c02d7950>] (load_module) from [<c02d81a0>] (SyS_finit_module+0x94/0xc0) [ 32.165012] [<c02d81a0>] (SyS_finit_module) from [<c020fb80>] (ret_fast_syscall+0x0/0x3c) [ 32.165448] ---[ end trace 8580c707e4338644 ]--- [ 32.210567] virtio_scsi: probe of virtio1 failed with error -22 [ 414.027184] dracut-initqueue[354]: Warning: Could not boot. [ 414.306136] dracut-initqueue[354]: Warning: /dev/disk/by-uuid/c19816a7-cbb8-4cbb-8608-7fec6d4994d0 does not exist Starting Dracut Emergency Shell... Warning: /dev/disk/by-uuid/c19816a7-cbb8-4cbb-8608-7fec6d4994d0 does not exist _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx