> -----Original Message-----
> From: Paul Whalen [mailto:pwhalen@xxxxxxxxxx]
> Sent: Friday, October 28, 2016 11:41 AM
> To: Timothy Krantz <tkrantz@xxxxxxxxxxxxxxxxxx>
> Cc: arm@xxxxxxxxxxxxxxxxxxxxxxx
> Subject: Re: [fedora-arm] Re: Jetson TK1 and kernel 4.8
>
>
>
> ----- Original Message -----
> > On Fri, Oct 28, 2016 at 3:43 PM, Timothy Krantz
> > <tkrantz@xxxxxxxxxxxxxxxxxx> wrote:
> > > Am I the only one who is having trouble with a Jetson TK1 and fedora
> > > 25 with
> > > 4.8 series kernels?
> > >
> > > Mine has as of yet failed to boot on any of them.
> >
> > Mine is currently running 4.8.1-1.fc25 without issues, just upgrading
> > it to the latest now to test that too.
>
> Was running 4.8.2-300.fc25.armv7hl+lpae, upgraded to 4.8.4-301.fc25
> without any issues. Could you post output of your failure?
>
> Paul
>
> > _______________________________________________
> > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an
> > email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
> >
Thanks for the response.
Attached are the logs from a failing 4.8.3 and the last working 4.67.
None of 4.7 worked for me either.
Thanks for any advice!
Tim
U-Boot 2014.10-rc2-g3127911 (Jun 07 2016 - 21:00:01)
TEGRA124
Board: NVIDIA Jetson TK1
I2C: ready
DRAM: 2 GiB
MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
*** Warning - bad CRC, using default environment
tegra-pcie: PCI regions:
tegra-pcie: I/O: 0x12000000-0x12010000
tegra-pcie: non-prefetchable memory: 0x13000000-0x20000000
tegra-pcie: prefetchable memory: 0x20000000-0x40000000
tegra-pcie: 2x1, 1x1 configuration
tegra-pcie: probing port 0, using 2 lanes
tegra-pcie: link 0 down, retrying
tegra-pcie: link 0 down, retrying
tegra-pcie: link 0 down, retrying
tegra-pcie: link 0 down, ignoring
tegra-pcie: probing port 1, using 1 lanes
In: serial
Out: serial
Err: serial
Net: RTL8169#0
Warning: RTL8169#0 using MAC address from net device
Hit any key to stop autoboot: 2 1 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
2644 bytes read in 50 ms (50.8 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Ignoring unknown command: default=Fedora
Fedora-Xfce-armhfp-24-1.2 Boot Options.
1:Fedora (4.8.3-300.fc25.armv7hl) 25 (Twenty Five)
2:Fedora (4.6.7-300.fc24.armv7hl) 24 (Twenty Four)
Enter choice: 2
2:Fedora (4.6.7-300.fc24.armv7hl) 24 (Twenty Four)
Retrieving file: /initramfs-4.6.7-300.fc24.armv7hl.img
16066105 bytes read in 874 ms (17.5 MiB/s)
Retrieving file: /vmlinuz-4.6.7-300.fc24.armv7hl
6102560 bytes read in 409 ms (14.2 MiB/s)
append: enforcing=0 ro root=/dev/sda2 LANG=en_US.UTF-8
Retrieving file: /dtb-4.6.7-300.fc24.armv7hl/tegra124-jetson-tk1.dtb
64182 bytes read in 1099 ms (56.6 KiB/s)
Kernel image @ 0x81000000 [ 0x000000 - 0x5d1e20 ]
## Flattened Device Tree blob at 82000000
Booting using the fdt blob at 0x82000000
Using Device Tree in place at 82000000, end 82012ab5
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.6.7-300.fc24.armv7hl (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 6.1.1 20160621 (Red Hat 6.1.1-3) (GCC) ) #1 SMP Wed Aug 17 20:46:17 UTC 2016
[ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: NVIDIA Tegra124 Jetson TK1
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 16 MiB at 0xfec00000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] percpu: Embedded 13 pages/cpu @eed8b000 s24332 r8192 d20724 u53248
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522559
[ 0.000000] Kernel command line: enforcing=0 ro root=/dev/sda2 LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2031220K/2097148K available (7609K kernel code, 1140K rwdata, 3376K rodata, 1108K init, 854K bss, 49544K reserved, 16384K cma-reserved, 1294332K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0cc28c8 (10987 kB)
[ 0.000000] .init : 0xc0cc3000 - 0xc0dd8000 (1108 kB)
[ 0.000000] .data : 0xc0dd8000 - 0xc0ef52cc (1141 kB)
[ 0.000000] .bss : 0xc0ef52cc - 0xc0fcabf8 ( 855 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000
[ 0.000000] Tegra clk 127: register failed with -17
[ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000030] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000045] Switching to timer-based delay loop, resolution 1000ns
[ 0.006725] Architected cp15 timer(s) running at 12.00MHz (virt).
[ 0.006744] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
[ 0.006764] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
[ 0.006778] Switching to timer-based delay loop, resolution 83ns
[ 0.007376] Console: colour dummy device 80x30
[ 0.008614] console [tty0] enabled
[ 0.008665] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000)
[ 0.008733] pid_max: default: 32768 minimum: 301
[ 0.009015] Security Framework initialized
[ 0.009050] Yama: becoming mindful.
[ 0.009091] SELinux: Initializing.
[ 0.009461] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.009505] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.010542] CPU: Testing write buffer coherency: ok
[ 0.010611] ftrace: allocating 31747 entries in 63 pages
[ 0.068318] /cpus/cpu@0 missing clock-frequency property
[ 0.068385] /cpus/cpu@1 missing clock-frequency property
[ 0.068444] /cpus/cpu@2 missing clock-frequency property
[ 0.068506] /cpus/cpu@3 missing clock-frequency property
[ 0.068532] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.068607] Setting up static identity map for 0x80208280 - 0x80208318
[ 0.074039] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1
[ 0.074764] EFI services will not be available.
[ 0.075825] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.076649] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.077448] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.077559] Brought up 4 CPUs
[ 0.077635] SMP: Total of 4 processors activated (96.00 BogoMIPS).
[ 0.077657] CPU: All CPU(s) started in SVC mode.
[ 0.079588] devtmpfs: initialized
[ 0.098890] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.099765] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[ 0.100561] atomic64_test: passed
[ 0.100678] pinctrl core: initialized pinctrl subsystem
[ 0.102220] NET: Registered protocol family 16
[ 0.103614] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.123957] No ATAGs?
[ 0.123999] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.124046] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.126703] Serial: AMBA PL011 UART driver
[ 0.157009] +5V_SYS: supplied by +VDD_MUX
[ 0.157391] +3.3V_SYS: supplied by +VDD_MUX
[ 0.157945] +USB0_VBUS_SW: Failed to request enable GPIO108: -517
[ 0.157977] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
[ 0.158102] +5V_USB_HS: Failed to request enable GPIO109: -517
[ 0.158131] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
[ 0.158376] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
[ 0.158405] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
[ 0.158527] +5V_HDMI_CON: Failed to request enable GPIO86: -517
[ 0.158555] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
[ 0.158674] +5V_SATA: Failed to request enable GPIO242: -517
[ 0.158702] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517
[ 0.158821] +12V_SATA: Failed to request enable GPIO242: -517
[ 0.158849] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517
[ 0.163089] vgaarb: loaded
[ 0.164174] SCSI subsystem initialized
[ 0.164684] usbcore: registered new interface driver usbfs
[ 0.164767] usbcore: registered new interface driver hub
[ 0.164897] usbcore: registered new device driver usb
[ 0.167600] NetLabel: Initializing
[ 0.167624] NetLabel: domain hash size = 128
[ 0.167645] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.167711] NetLabel: unlabeled traffic allowed by default
[ 0.168073] clocksource: Switched to clocksource arch_sys_counter
[ 0.238115] VFS: Disk quotas dquot_6.6.0
[ 0.238222] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.253360] NET: Registered protocol family 2
[ 0.254315] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.254420] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.254613] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.254686] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.254744] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.255060] NET: Registered protocol family 1
[ 0.255642] RPC: Registered named UNIX socket transport module.
[ 0.255671] RPC: Registered udp transport module.
[ 0.255693] RPC: Registered tcp transport module.
[ 0.255715] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.256183] Unpacking initramfs...
[ 1.537473] Freeing initrd memory: 15692K (c2100000 - c3053000)
[ 1.538296] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 1.545799] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.545956] audit: initializing netlink subsys (disabled)
[ 1.546031] audit: type=2000 audit(1.499:1): initialized
[ 1.546913] Initialise system trusted keyring
[ 1.547368] workingset: timestamp_bits=12 max_order=19 bucket_order=7
[ 1.558771] zbud: loaded
[ 1.562150] NFS: Registering the id_resolver key type
[ 1.562205] Key type id_resolver registered
[ 1.562229] Key type id_legacy registered
[ 1.562274] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.562955] Key type big_key registered
[ 1.869654] NET: Registered protocol family 38
[ 1.869717] Key type asymmetric registered
[ 1.869745] Asymmetric key parser 'x509' registered
[ 1.869858] bounce: pool size: 64 pages
[ 1.870150] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.870334] io scheduler noop registered
[ 1.870369] io scheduler deadline registered
[ 1.870492] io scheduler cfq registered (default)
[ 1.884666] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.884733] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.885486] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 1.885558] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 1.892168] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
[ 1.893432] tegra-pmc 7000e400.pmc: emergency thermal reset enabled
[ 1.894238] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.904653] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 331, base_baud = 25500000) is a Tegra
[ 2.760673] console [ttyS0] enabled
[ 2.764904] Serial: AMBA driver
[ 2.769062] msm_serial: driver initialized
[ 2.776267] libphy: Fixed MDIO Bus: probed
[ 2.780911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.787497] ehci-pci: EHCI PCI platform driver
[ 2.792027] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.798251] ohci-pci: OHCI PCI platform driver
[ 2.802764] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.809412] usbcore: registered new interface driver usbserial
[ 2.815311] usbcore: registered new interface driver usbserial_generic
[ 2.821905] usbserial: USB Serial support registered for generic
[ 2.828209] mousedev: PS/2 mouse device common for all mice
[ 2.837887] device-mapper: uevent: version 1.0.3
[ 2.843040] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@xxxxxxxxxx
[ 2.851956] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.858114] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.863825] usbcore: registered new interface driver usbhid
[ 2.869419] usbhid: USB HID core driver
[ 2.877306] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 2.885087] drop_monitor: Initializing network drop monitor service
[ 2.891709] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.897169] Initializing XFRM netlink socket
[ 2.902772] NET: Registered protocol family 10
[ 2.908487] mip6: Mobile IPv6
[ 2.911480] NET: Registered protocol family 17
[ 2.916071] Key type dns_resolver registered
[ 2.920497] ThumbEE CPU extension supported.
[ 2.924809] Registering SWP/SWPB emulation handler
[ 2.930586] registered taskstats version 1
[ 2.934780] Loading compiled-in X.509 certificates
[ 2.951800] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 2.964726] Loaded X.509 cert 'Fedora kernel signing key: e7d8d30f1282946953cc8a9a8c4fe031d9e1c209'
[ 2.973962] zswap: loaded using pool lzo/zbud
[ 2.982731] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 2.989355] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 2.997931] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 204000000, volt: 900000, enabled: 1. New: freq: 204000000, volt: 900000, enabled: 1
[ 3.011960] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 306000000, volt: 900000, enabled: 1. New: freq: 306000000, volt: 900000, enabled: 1
[ 3.025981] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 408000000, volt: 900000, enabled: 1. New: freq: 408000000, volt: 900000, enabled: 1
[ 3.040006] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 510000000, volt: 900000, enabled: 1. New: freq: 510000000, volt: 900000, enabled: 1
[ 3.054029] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 612000000, volt: 900000, enabled: 1. New: freq: 612000000, volt: 900000, enabled: 1
[ 3.068049] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 714000000, volt: 900000, enabled: 1. New: freq: 714000000, volt: 900000, enabled: 1
[ 3.082069] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 816000000, volt: 900000, enabled: 1. New: freq: 816000000, volt: 900000, enabled: 1
[ 3.096091] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 918000000, volt: 900000, enabled: 1. New: freq: 918000000, volt: 900000, enabled: 1
[ 3.110115] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1020000000, volt: 900000, enabled: 1. New: freq: 1020000000, volt: 900000, enabled: 1
[ 3.124318] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1122000000, volt: 900000, enabled: 1. New: freq: 1122000000, volt: 900000, enabled: 1
[ 3.138519] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1224000000, volt: 900000, enabled: 1. New: freq: 1224000000, volt: 900000, enabled: 1
[ 3.152724] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1326000000, volt: 900000, enabled: 1. New: freq: 1326000000, volt: 900000, enabled: 1
[ 3.166935] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1428000000, volt: 900000, enabled: 1. New: freq: 1428000000, volt: 900000, enabled: 1
[ 3.181137] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1530000000, volt: 900000, enabled: 1. New: freq: 1530000000, volt: 900000, enabled: 1
[ 3.195339] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1632000000, volt: 920000, enabled: 1. New: freq: 1632000000, volt: 920000, enabled: 1
[ 3.209544] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1734000000, volt: 950000, enabled: 1. New: freq: 1734000000, volt: 950000, enabled: 1
[ 3.223754] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1836000000, volt: 980000, enabled: 1. New: freq: 1836000000, volt: 980000, enabled: 1
[ 3.237968] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1938000000, volt: 1020000, enabled: 1. New: freq: 1938000000, volt: 1020000, enabled: 1
[ 3.252348] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 2014500000, volt: 1050000, enabled: 1. New: freq: 2014500000, volt: 1050000, enabled: 1
[ 3.266727] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 2116500000, volt: 1090000, enabled: 1. New: freq: 2116500000, volt: 1090000, enabled: 1
[ 3.281105] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 2218500000, volt: 1130000, enabled: 1. New: freq: 2218500000, volt: 1130000, enabled: 1
[ 3.295484] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 2320500000, volt: 1170000, enabled: 1. New: freq: 2320500000, volt: 1170000, enabled: 1
[ 3.309885] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 3.317539] hctosys: unable to open rtc device (rtc0)
[ 3.322951] sr_init: No PMIC hook to init smartreflex
[ 3.328153] sr_init: platform driver register failed for SR
[ 3.347945] +3.3V_AVDD_HDMI_AP_GATED: disabling
[ 3.352510] +USB0_VBUS_SW: disabling
[ 3.356111] +5V_USB_HS: disabling
[ 3.359447] +1.05V_RUN_AVDD_HDMI_PLL: disabling
[ 3.363999] +5V_HDMI_CON: disabling
[ 3.367495] +5V_SATA: disabling
[ 3.370657] +12V_SATA: disabling
[ 3.375732] Freeing unused kernel memory: 1108K (c0cc3000 - c0dd8000)
[ 3.382221] This architecture does not have kernel memory protection.
[ 3.403646] systemd[1]: System time before build time, advancing clock.
[ 3.419551] random: systemd urandom read with 0 bits of entropy available
[ 3.456970] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.475804] systemd[1]: Detected architecture arm.
[ 3.480639] systemd[1]: Running in initial RAM disk.
Welcome to Fedora 24 (Twenty Four) dracut-044-20.fc24 (Initramfs)!
[ 3.498274] systemd[1]: No hostname configured.
[ 3.502837] systemd[1]: Set hostname to <localhost>.
[ 3.771870] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 3.783503] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 3.798419] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 3.813416] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 3.831059] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 3.863530] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required st... nodes for the current kernel...
[ 3.886861] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 3.906502] systemd[1]: Starting Setup Virtual Console...
Starting Setup Virtual Console...
[ 3.923310] systemd[1]: Reached target Local File Systems.
[ OK ] Reached target Local File Systems.
[ 3.943337] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 3.973639] systemd[1]: Starting dracut cmdline hook...
Starting dracut cmdline hook...
[ 3.988286] systemd[1]: Reached target Timers.
[ OK ] Reached target Timers.
[ 4.003753] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 4.022192] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 4.033577] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 4.048308] systemd[1]: Reached target Sockets.
[ OK ] Reached target Sockets.
[ 4.103632] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ 4.128812] audit: type=1130 audit(1455208080.719:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.150544] systemd[1]: Started Apply Kernel Variables.
[ OK ] Started Apply Kernel Variables.
[ 4.168309] audit: type=1130 audit(1455208080.759:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.188842] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ 4.203508] audit: type=1130 audit(1455208080.794:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Started Setup Virtual Console.
[ 4.238388] audit: type=1130 audit(1455208080.829:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Starting Create Static Device Nodes in /dev...
[ OK ] Started Create Static Device Nodes in /dev.
[ 4.368403] audit: type=1130 audit(1455208080.959:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Started dracut cmdline hook.
[ 4.498315] audit: type=1130 audit(1455208081.089:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Starting dracut pre-udev hook...
[ OK ] Started dracut pre-udev hook.
[ 4.738339] audit: type=1130 audit(1455208081.329:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ 4.823419] audit: type=1130 audit(1455208081.414:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Starting udev Coldplug all Devices...
Mounting Configuration File System...
[ OK ] Mounted Configuration File System.
[ OK ] Started udev Coldplug all Devices.
[ 5.198380] audit: type=1130 audit(1455208081.789:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.233358] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 5.240999] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 5.249841] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 204000000, volt: 900000, enabled: 1. New: freq: 204000000, volt: 900000, enabled: 1
[ 5.264294] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 306000000, volt: 900000, enabled: 1. New: freq: 306000000, volt: 900000, enabled: 1
[ 5.278346] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 408000000, volt: 900000, enabled: 1. New: freq: 408000000, volt: 900000, enabled: 1
[ 5.285619] [drm] Initialized drm 1.1.0 20060810
[ 5.297028] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 510000000, volt: 900000, enabled: 1. New: freq: 510000000, volt: 900000, enabled: 1
[ 5.311075] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 612000000, volt: 900000, enabled: 1. New: freq: 612000000, volt: 900000, enabled: 1
[ 5.320671] as3722 4-0040: AS3722 with revision 0x1 found
[ 5.330573] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 714000000, volt: 900000, enabled: 1. New: freq: 714000000, volt: 900000, enabled: 1
[ 5.344646] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 816000000, volt: 900000, enabled: 1. New: freq: 816000000, volt: 900000, enabled: 1
[ 5.349715] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
[ 5.349725] as3722-rtc as3722-rtc: RTC interrupt 371
[ 5.370643] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 918000000, volt: 900000, enabled: 1. New: freq: 918000000, volt: 900000, enabled: 1
[ 5.384709] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1020000000, volt: 900000, enabled: 1. New: freq: 1020000000, volt: 900000, enabled: 1
[ 5.398495] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
[ 5.398583] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[ 5.401072] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
[ 5.401078] tegra-ahci 70027000.sata: Failed to get regulators
[ 5.404091] +5V_HDMI_CON: supplied by +5V_SYS
[ 5.404292] tegra-hdmi 54280000.hdmi: failed to get PLL regulator
[ 5.430897] tegra-phy 7d004000.usb-phy: no vbus regulator
[ 5.431268] +5V_USB_HS: supplied by +5V_SYS
[ 5.439976] tegra-ehci: Tegra EHCI driver
[ 5.448428] tegra-ehci 7d004000.usb: EHCI Host Controller
[ 5.448773] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
[ 5.449014] sdhci: Secure Digital Host Controller Interface driver
[ 5.449017] sdhci: Copyright(c) Pierre Ossman
[ 5.454895] tegra-ehci 7d004000.usb: irq 348, io mem 0x7d004000
[ 5.461277] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.463117] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
[ 5.463462] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.463471] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.463477] usb usb1: Product: EHCI Host Controller
[ 5.463483] usb usb1: Manufacturer: Linux 4.6.7-300.fc24.armv7hl ehci_hcd
[ 5.463489] usb usb1: SerialNumber: 7d004000.usb
[ 5.464446] hub 1-0:1.0: USB hub found
[ 5.464497] hub 1-0:1.0: 1 port detected
[ 5.465379] tegra-ehci 7d008000.usb: EHCI Host Controller
[ 5.465677] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
[ 5.467004] tegra-ehci 7d008000.usb: irq 349, io mem 0x7d008000
[ 5.473248] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
[ 5.473570] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.473579] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.473586] usb usb2: Product: EHCI Host Controller
[ 5.473592] usb usb2: Manufacturer: Linux 4.6.7-300.fc24.armv7hl ehci_hcd
[ 5.473598] usb usb2: SerialNumber: 7d008000.usb
[ 5.474506] hub 2-0:1.0: USB hub found
[ 5.474555] hub 2-0:1.0: 1 port detected
[ 5.475699] input: gpio-keys as /devices/soc0/gpio-keys/input/input0
[ 5.481535] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 5.481558] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 5.481632] mmc0: Unknown controller version (3). You may experience problems.
[ 5.481989] mmc0: Unknown controller version (3). You may experience problems.
[ 5.482064] mmc0: Invalid maximum block size, assuming 512 bytes
[ 5.528203] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
[ 5.575936] mmc0: new high speed MMC card at address 0001
[ 5.641357] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1122000000, volt: 900000, enabled: 1. New: freq: 1122000000, volt: 900000, enabled: 1
[ 5.655656] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1224000000, volt: 900000, enabled: 1. New: freq: 1224000000, volt: 900000, enabled: 1
[ 5.655671] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1326000000, volt: 900000, enabled: 1. New: freq: 1326000000, volt: 900000, enabled: 1
[ 5.655683] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1428000000, volt: 900000, enabled: 1. New: freq: 1428000000, volt: 900000, enabled: 1
[ 5.655694] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1530000000, volt: 900000, enabled: 1. New: freq: 1530000000, volt: 900000, enabled: 1
[ 5.655705] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1632000000, volt: 920000, enabled: 1. New: freq: 1632000000, volt: 920000, enabled: 1
[ 5.655716] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1734000000, volt: 950000, enabled: 1. New: freq: 1734000000, volt: 950000, enabled: 1
[ 5.655728] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1836000000, volt: 980000, enabled: 1. New: freq: 1836000000, volt: 980000, enabled: 1
[ 5.655743] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1938000000, volt: 1020000, enabled: 1. New: freq: 1938000000, volt: 1020000, enabled: 1
[ 5.655755] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 2014500000, volt: 1050000, enabled: 1. New: freq: 2014500000, volt: 1050000, enabled: 1
[ 5.655767] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 2116500000, volt: 1090000, enabled: 1. New: freq: 2116500000, volt: 1090000, enabled: 1
[ 5.655780] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 2218500000, volt: 1130000, enabled: 1. New: freq: 2218500000, volt: 1130000, enabled: 1
[ 5.655794] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 2320500000, volt: 1170000, enabled: 1. New: freq: 2320500000, volt: 1170000, enabled: 1
[ 5.669407] +3.3V_RUN: supplied by +3.3V_SYS
[ 5.669484] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
[ 5.669582] +USB0_VBUS_SW: supplied by +5V_SYS
[ 5.669711] +1.05V_RUN: supplied by +5V_SYS
[ 5.669787] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
[ 5.669888] +5V_SATA: supplied by +5V_SYS
[ 5.669991] +12V_SATA: supplied by +VDD_MUX
[ 5.670071] +1.35V_LP0(sd2): supplied by +5V_SYS
[ 5.670145] +1.35V_LP0(sd3): supplied by +5V_SYS
[ 5.670220] +1.8V_VDDIO: supplied by +5V_SYS
[ 5.670302] +1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
[ 5.670408] +1.8V_RUN_CAM: supplied by +3.3V_RUN
[ 5.670495] +1.2V_GEN_AVDD: supplied by +1.8V_VDDIO
[ 5.670583] +1.05V_LP0_VDD_RTC: supplied by +3.3V_SYS
[ 5.670668] +2.8V_RUN_CAM: supplied by +3.3V_SYS
[ 5.670745] +1.2V_RUN_CAM_FRONT: supplied by +1.8V_VDDIO
[ 5.670842] +VDDIO_SDMMC3: supplied by +3.3V_RUN
[ 5.670934] +1.05V_RUN_CAM_REAR: supplied by +1.8V_VDDIO
[ 5.671012] +3.3V_RUN_TOUCH: supplied by +5V_SYS
[ 5.671093] +2.8V_RUN_CAM_AF: supplied by +5V_SYS
[ 5.671192] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
[ 5.672419] +3.3V_LP0: supplied by +3.3V_SYS
[ 5.673017] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 5.678804] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
[ 5.680860] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
[ 5.692245] mmcblk0: mmc0:0001 SEM16G 14.7 GiB
[ 5.702249] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
[ 5.704075] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
[ 5.704621] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
[ 5.708003] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
Starting dracut initqueue hook...
Starting Show Plymouth Boot Screen...
[ OK ] Reached target System Initialization.
[ 6.080122] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Reached target Paths.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ OK ] Reached target Basic System.
[ 6.494247] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[ 6.905208] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
[ 6.913110] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
[ 6.919611] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
[ 6.928122] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
[ 6.944579] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
[ 6.951855] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 6.958077] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
[ 6.964984] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
[ 6.972333] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 6.978443] PCI: bus0: Fast back to back transfers disabled
[ 6.984054] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.003127] PCI: bus1: Fast back to back transfers disabled
[ 7.008860] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
[ 7.015806] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref]
[ 7.023696] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 7.029920] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
[ 7.037737] pci 0000:01:00.0: BAR 2: assigned [mem 0x13000000-0x13000fff 64bit]
[ 7.045110] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 7.051243] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 7.056246] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 7.062375] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]
[ 7.069196] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref]
[ 7.077030] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
[ 7.084287] pcieport 0000:00:02.0: enabling device (0140 -> 0143)
[ 7.090834] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 7.097846] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 7.104670] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 7.110307] r8169 0000:01:00.0: enabling device (0140 -> 0143)
[ 7.125221] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf0d58000, 00:04:4b:21:2a:4c, XID 0c000800 IRQ 388
[ 7.133384] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 7.140298] r8169 0000:01:00.0 enp1s0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 7.150613] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
[ 7.159720] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst
[ 7.170746] scsi host0: tegra-ahci
[ 7.177158] scsi host1: tegra-ahci
[ 7.181421] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 341
[ 7.189489] ata2: DUMMY
[ 7.195610] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.202284] [drm] No driver support for vblank timestamp query.
[ 7.208633] drm drm: No connectors reported connected with modes
[ 7.214770] [drm] Cannot find any crtc or sizes - going 1024x768
[ 7.230577] Console: switching to colour frame buffer device 128x48
[ 7.251553] drm drm: fb0: frame buffer device
[ 7.268107] [drm] Initialized tegra 0.0.0 20120330 on minor 0
[ 7.268875] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 7.268897] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 7.268968] mmc1: Unknown controller version (3). You may experience problems.
[ 7.279017] mmc1: Invalid maximum block size, assuming 512 bytes
[ 7.318337] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
[ 7.364264] mmc1: new high speed SDHC card at address aaaa
[ 7.370712] mmcblk1: mmc1:aaaa SE32G 29.7 GiB
[ 7.376672] mmcblk1: p1 p2 p3
[ 7.504718] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.515398] ata1.00: ATA-9: SanDisk SDSSDA120G, Z32070RL, max UDMA/133
[ 7.522114] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 7.541804] ata1.00: configured for UDMA/133
[ 7.546877] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDA12 70RL PQ: 0 ANSI: 5
[ 7.619159] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 7.619444] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.632787] sd 0:0:0:0: [sda] Write Protect is off
[ 7.643728] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.660517] sda: sda1 sda2
[ 7.671483] sd 0:0:0:0: [sda] Attached SCSI disk
[ OK ] Found device SanDisk_SDSSDA120G 2.
[ OK ] Started dracut i[ 7.754429] audit_printk_skb: 3 callbacks suppressed
nitqueue hook.
[ 7.754435] audit: type=1130 audit(1455208084.344:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
fsck removed
A start job is running for File Sys...ck on /dev/sda2 (42s / no limit)[** ] A start job is running for File Sys...ck on /dev/sda2 (42s / no limit) [ 46.393537] audit: type=1130 audit(1455208122.984:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Started File System Check on /dev/sda2.
Mounting /sysroot...
[ 46.512709] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ OK ] Mounted /sysroot.
[ OK ] Reached target Initrd Root File System.
Starting Reload Configuration from the Real Root...
[ OK ] Started Reload Confi[ 47.135603] audit: type=1130 audit(1455208123.724:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
guration from the Real Root.
[ 47.135705] audit: type=1131 audit(1455208123.724:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Reached target Initrd File Systems.
[ OK ] Reached target Initrd Default Target.
Starting dracut pre-pivot and cleanup hook...
[ 47.596247] audit: type=1130 audit(1455208124.184:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Started dracut pre-pivot and cleanup hook.
Starting Cleaning Up and Shutting Down Daemons...
Starting Plymouth switch root service...
[ OK ] Stopped target Timer[ 47.710777] audit: type=1130 audit(1455208124.299:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
s.
[ 47.711386] audit: type=1131 audit(1455208124.299:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 47.784530] audit: type=1131 audit(1455208124.374:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Stopped Cleaning Up and Shutting Down Daemons.
[ OK ] Stopped dracut pre-pivot and cleanup hook.
[ OK [ 47.836945] audit: type=1130 audit(1455208124.424:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 47.837043] audit: type=1131 audit(1455208124.424:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
] Stopped target Remote File Systems.
[ OK ] Stopped target Remote File Systems (Pre).
[ OK ] Stopped dracut initqueue hook.
[ OK ] Stopped target Initrd Default Target.
[ 47.956809] audit: type=1130 audit(1455208124.544:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Slices.
[ OK ] Stopped target Paths.
[ OK ] Stopped target Sockets.
[ OK ] Stopped target System Initialization.
[ OK ] Stopped udev Coldplug all Devices.
Stopping udev Kernel Device Manager...
[ OK ] Stopped target Swap.
[ OK ] Stopped target Local File Systems.
[ OK ] Stopped Apply Kernel Variables.
[ OK ] Stopped udev Kernel Device Manager.
[ OK ] Started Plymouth switch root service.
[ OK ] Stopped dracut pre-udev hook.
[ OK ] Stopped dracut cmdline hook.
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Stopped Create list of required sta...ce nodes for the current kernel.
[ OK ] Closed udev Control Socket.
[ OK ] Closed udev Kernel Socket.
Starting Cleanup udevd DB...
[ OK ] Started Cleanup udevd DB.
[ OK ] Reached target Switch Root.
Starting Switch Root...
[ 48.276818] systemd-journald[164]: Received SIGTERM from PID 1 (systemd).
[ 48.444241] SELinux: Disabled at runtime.
[ 48.510767] systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
[ 48.526550] systemd[1]: System time before build time, advancing clock.
Welcome to Fedora 25 (Twenty Five)!
[ OK ] Stopped Switch Root.
[ OK ] Stopped Journal Service.
Starting Journal Service...
[ OK ] Listening on Process Core Dump Socket.
Mounting POSIX Message Queue File System...
Mounting NFSD configuration filesystem...
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Stopped File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ OK ] Reached target User and Group Name Lookups.
[ OK ] Stopped target Switch Root.
[ [ 49.097007] EXT4-fs (sda2): re-mounted. Opts: (null)
OK ] Stopped target Initrd Root File System.
[ OK ] Created slice system-getty.slice.
Mounting Debug File System...
[ OK ] Created slice system-sshd\x2dkeygen.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
[ OK ] Stopped target Initrd File Systems.
Starting Apply Kernel Variables...
[ OK ] Listening on LVM2 poll daemon socket.
[ OK ] Listening on LVM2 metadata daemon socket.
Starting Monitoring of LVM2 mirrors... dmeventd or progress polling...
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Mounted Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Journal Service.
[FAILED] Failed to mount NFSD configuration filesystem.
See 'systemctl status proc-fs-nfsd.mount' for details.
[DEPEND] Dependency failed for NFS Mount Daemon.
[DEPEND] Dependency failed for NFS server and services.
[DEPEND] Dependency failed for NFSv4 ID-name mapping service.
[DEPEND] Dependency failed for GSSAPI Proxy Daemon.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started LVM2 metadata daemon.
Starting Configure read-only root support...
Starting udev Coldplug all Devices...
Starting Create Static Device Nodes in /dev...
Starting Flush Journal to Persistent Storage...
[ 49.353487] systemd-journald[472]: Received request to flush runtime journal from PID 1
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Started Configure read-only root support.
[ OK ] Started Monitoring of LVM2 mirrors,...ng dmeventd or progress polling.
Starting Load/Save Random Seed...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started udev Coldplug all Devices.
Starting udev Wait for Complete Device Initialization...
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Found device /dev/ttyS0.
[ OK ] Found device SanDisk_SDSSDA120G 1.
Activating swap /dev/sda1...
[ 50.387429] Adding 1952764k swap on /dev/sda1. Priority:-1 extents:1 across:1952764k SSFS
[ OK ] Activated swap /dev/sda1.
[ OK ] Reached target Swap.
[ OK ] Found device /dev/disk/by-uuid/122be8f1-23d5-43dd-b15d-13482b97da00.
[ OK ] Started udev Wait for Complete Device Initialization.
Starting Activation of DM RAID sets...
[ OK ] Started Activation of DM RAID sets.
[ OK ] Reached target Local File Systems (Pre).
Mounting /boot...
[ OK ] Reached target Encrypted Volumes.
[ 51.130580] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Import network configuration from initramfs...
Starting Preprocess NFS configuration...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Restore /run/initramfs on shutdown...
[ OK ] Started Restore /run/initramfs on shutdown.
[ OK ] Started Preprocess NFS configuration.
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ OK ] Started Import network configuration from initramfs.
Starting Create Volatile Files and Directories...
[ OK ] Started Create Volatile Files and Directories.
Starting Security Auditing Service...
Mounting RPC Pipe File System...
[ OK ] Mounted RPC Pipe File System.
[ OK ] Reached target NFS client services.
[ 51.460246] audit_printk_skb: 144 callbacks suppressed
[ 51.460252] audit: type=1305 audit(1469476189.929:71): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
[ 51.460346] audit: type=1305 audit(1469476189.929:72): audit_pid=598 old=0 auid=4294967295 ses=4294967295 res=1
[ OK ] Started Security Auditing Service.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Started daily update of the root trust anchor for DNSSEC.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Listening on Open-iSCSI iscsid Socket.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on PC/SC Smart Card Daemon Activation Socket.
[ OK ] Started CUPS Scheduler.
[ OK ] Reached target Paths.
[ OK ] Listening on CUPS Scheduler.
[ OK ] Listening on RPCbind Server Activation Socket.
[ OK ] Reached target Sockets.
[ OK ] Started dnf makecache timer.
[ OK ] Reached target Basic System.
[ OK ] Started Hardware RNG Entropy Gatherer Daemon.
Starting NTP client/server...
[ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
[ OK ] Started D-Bus System Message Bus.
Starting Accounts Service...
[ OK ] Started irqbalance daemon.
Starting Network Manager...
Starting ABRT Automated Bug Reporting Tool...
Starting Avahi mDNS/DNS-SD Stack...
Starting System Logging Service...
[ OK ] Reached target sshd-keygen.target.
Starting Login Service...
[ OK ] Reached target Timers.
Starting RealtimeKit Scheduling Policy Service...
[ OK ] Started Manage Sound Card State (restore and store).
Starting Modem Manager...
[ OK ] Started System Logging Service.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started RealtimeKit Scheduling Policy Service.
[ OK ] Started NTP client/server.
[ OK ] Started Login Service.
Starting Authorization Manager...
[ OK ] Started Modem Manager.
[ OK ] Started ABRT Automated Bug Reporting Tool.
[ OK ] Started ABRT Xorg log watcher.
Starting Install ABRT coredump hook...
[ OK ] Started ABRT kernel log watcher.
[ OK ] Started Network Manager.
[ OK ] Reached target Network.
[ OK ] Started Distccd A Distributed Compilation Server.
Starting OpenSSH server daemon...
Starting NFS status monitor for NFSv2/3 locking....
[ OK ] Started Logout off all iSCSI sessions on shutdown.
Starting Availability of block devices...
[ OK ] Reached target Remote File Systems (Pre).
Starting Notify NFS peers of a restart...
Starting Network Manager Wait Online...
[ OK ] Started Availability of block devices.
[ OK ] Started Notify NFS peers of a restart.
Starting RPC bind service...
Starting Network Manager Script Dispatcher Service...
[ OK ] Started Network Manager Script Dispatcher Service.
[ OK ] Started Authorization Manager.
[ OK ] Started RPC bind service.
[ OK ] Started OpenSSH server daemon.
[ OK ] Started Accounts Service.
[ OK ] Started Install ABRT coredump hook.
Starting Hostname Service...
[ OK ] Started NFS status monitor for NFSv2/3 locking..
[ OK ] Started Hostname Service.
[ 53.193591] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 53.255741] r8169 0000:01:00.0 enp1s0: link down
[ 53.255788] r8169 0000:01:00.0 enp1s0: link down
[ 53.273556] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 56.208605] r8169 0000:01:00.0 enp1s0: link up
[ 56.217124] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ OK ] Started Network Manager Wait Online.
[ OK ] Reached target Network is Online.
Mounting /usr/src/bareos...
[ OK ] Started xrdp session manager.
[ OK ] Started xrdp daemon.
Mounting /storage...
Mounting /root/mythtv...
Mounting /opt/vc...
[ OK ] Mounted /usr/src/bareos.
[ OK ] Mounted /root/mythtv.
[ OK ] Mounted /storage.
[ OK ] Mounted /opt/vc.
[ OK ] Reached target Remote File Systems.
Starting Permit User Sessions...
[ OK ] Started Permit User Sessions.
Starting Terminate Plymouth Boot Screen...
Starting Hold until boot process finishes up...
[ OK ] Started Job spooling tools.
[ OK ] Created slice User Slice of root.
[ OK ] Started Session 1 of user root.
[ OK ] Started Command Scheduler.
[ 61.963926] vgaarb: this pci device is not a vga device
[ 62.234756] vgaarb: this pci device is not a vga device
Fedora 25 (Twenty Five)
Kernel 4.6.7-300.fc24.armv7hl on an armv7l (ttyS0)
jet login: U-Boot 2014.10-rc2-g3127911 (Jun 07 2016 - 21:00:01)
TEGRA124
Board: NVIDIA Jetson TK1
I2C: ready
DRAM: 2 GiB
MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
*** Warning - bad CRC, using default environment
tegra-pcie: PCI regions:
tegra-pcie: I/O: 0x12000000-0x12010000
tegra-pcie: non-prefetchable memory: 0x13000000-0x20000000
tegra-pcie: prefetchable memory: 0x20000000-0x40000000
tegra-pcie: 2x1, 1x1 configuration
tegra-pcie: probing port 0, using 2 lanes
tegra-pcie: link 0 down, retrying
tegra-pcie: link 0 down, retrying
tegra-pcie: link 0 down, retrying
tegra-pcie: link 0 down, ignoring
tegra-pcie: probing port 1, using 1 lanes
In: serial
Out: serial
Err: serial
Net: RTL8169#0
Warning: RTL8169#0 using MAC address from net device
Hit any key to stop autoboot: 2 1 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
2644 bytes read in 50 ms (50.8 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
Ignoring unknown command: default=Fedora
Fedora-Xfce-armhfp-24-1.2 Boot Options.
1:Fedora (4.8.3-300.fc25.armv7hl) 25 (Twenty Five)
2:Fedora (4.6.7-300.fc24.armv7hl) 24 (Twenty Four)
Enter choice: 1:Fedora (4.8.3-300.fc25.armv7hl) 25 (Twenty Five)
Retrieving file: /initramfs-4.8.3-300.fc25.armv7hl.img
14937708 bytes read in 778 ms (18.3 MiB/s)
Retrieving file: /vmlinuz-4.8.3-300.fc25.armv7hl
5909056 bytes read in 309 ms (18.2 MiB/s)
append: enforcing=0 ro root=/dev/sda2 LANG=en_US.UTF-8
Retrieving file: /dtb-4.8.3-300.fc25.armv7hl/tegra124-jetson-tk1.dtb
66405 bytes read in 1106 ms (58.6 KiB/s)
Kernel image @ 0x81000000 [ 0x000000 - 0x5a2a40 ]
## Flattened Device Tree blob at 82000000
Booting using the fdt blob at 0x82000000
Using Device Tree in place at 82000000, end 82013364
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.8.3-300.fc25.armv7hl (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 6.2.1 20160916 (Red Hat 6.2.1-2) (GCC) ) #1 SMP Thu Oct 20 16:49:07 UTC 2016
[ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt:Machine model: NVIDIA Tegra124 Jetson TK1
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 64 MiB at 0xfbc00000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] percpu: Embedded 15 pages/cpu @eed81000 s31500 r8192 d21748 u61440
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522559
[ 0.000000] Kernel command line: enforcing=0 ro root=/dev/sda2 LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1983560K/2097148K available (7032K kernel code, 1092K rwdata, 3288K rodata, 1160K init, 853K bss, 48052K reserved, 65536K cma-reserved, 1245180K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc08e62b4 (7033 kB)
[ 0.000000] .init : 0xc0c56000 - 0xc0d78000 (1160 kB)
[ 0.000000] .data : 0xc0d78000 - 0xc0e89104 (1093 kB)
[ 0.000000] .bss : 0xc0e89104 - 0xc0f5e6b0 ( 854 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GIC physical location is 0x50041000
[ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
[ 0.000000] Tegra clk 127: register failed with -17
[ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000031] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000047] Switching to timer-based delay loop, resolution 1000ns
[ 0.007180] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt).
[ 0.007200] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
[ 0.007221] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
[ 0.007236] Switching to timer-based delay loop, resolution 83ns
[ 0.007846] Console: colour dummy device 80x30
[ 0.009101] console [tty0] enabled
[ 0.009156] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000)
[ 0.009224] pid_max: default: 32768 minimum: 301
[ 0.009721] Security Framework initialized
[ 0.009757] Yama: becoming mindful.
[ 0.009797] SELinux: Initializing.
[ 0.010375] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.010419] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.011675] CPU: Testing write buffer coherency: ok
[ 0.011743] ftrace: allocating 30363 entries in 60 pages
[ 0.079544] /cpus/cpu@0 missing clock-frequency property
[ 0.079614] /cpus/cpu@1 missing clock-frequency property
[ 0.079677] /cpus/cpu@2 missing clock-frequency property
[ 0.079741] /cpus/cpu@3 missing clock-frequency property
[ 0.079768] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.079806] Setting up static identity map for 0x80208280 - 0x80208318
[ 0.085524] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1
[ 0.086242] EFI services will not be available.
[ 0.087318] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.089998] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.094996] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.099304] Brought up 4 CPUs
[ 0.099381] SMP: Total of 4 processors activated (96.00 BogoMIPS).
[ 0.099404] CPU: All CPU(s) started in SVC mode.
[ 0.101333] devtmpfs: initialized
[ 0.123658] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.124090] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[ 0.126084] atomic64_test: passed
[ 0.126180] pinctrl core: initialized pinctrl subsystem
[ 0.127979] NET: Registered protocol family 16
[ 0.129255] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.144745] cpuidle: using governor menu
[ 0.163714] No ATAGs?
[ 0.163749] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.163796] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.166346] Serial: AMBA PL011 UART driver
[ 0.198291] +5V_SYS: supplied by +VDD_MUX
[ 0.198676] +3.3V_SYS: supplied by +VDD_MUX
[ 0.199463] +USB0_VBUS_SW: Failed to request enable GPIO108: -517
[ 0.199495] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
[ 0.199619] +5V_USB_HS: Failed to request enable GPIO109: -517
[ 0.199648] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
[ 0.199851] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
[ 0.199881] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
[ 0.200046] +5V_HDMI_CON: Failed to request enable GPIO86: -517
[ 0.200075] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
[ 0.200195] +5V_SATA: Failed to request enable GPIO242: -517
[ 0.200223] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517
[ 0.200343] +12V_SATA: Failed to request enable GPIO242: -517
[ 0.200370] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517
[ 0.204653] vgaarb: loaded
[ 0.205443] SCSI subsystem initialized
[ 0.205960] usbcore: registered new interface driver usbfs
[ 0.206050] usbcore: registered new interface driver hub
[ 0.206174] usbcore: registered new device driver usb
[ 0.208750] NetLabel: Initializing
[ 0.208774] NetLabel: domain hash size = 128
[ 0.208795] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.208876] NetLabel: unlabeled traffic allowed by default
[ 0.209189] clocksource: Switched to clocksource arch_sys_counter
[ 0.272506] VFS: Disk quotas dquot_6.6.0
[ 0.272623] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.287866] NET: Registered protocol family 2
[ 0.288912] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.289017] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.289242] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.289320] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.289377] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.289703] NET: Registered protocol family 1
[ 0.290173] Unpacking initramfs...
[ 1.510708] Freeing initrd memory: 14588K (c2100000 - c2f3f000)
[ 1.511659] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 1.518649] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.518778] audit: initializing netlink subsys (disabled)
[ 1.518863] audit: type=2000 audit(1.459:1): initialized
[ 1.519778] Initialise system trusted keyrings
[ 1.520207] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 1.531958] zbud: loaded
[ 1.535736] Key type big_key registered
[ 1.858147] NET: Registered protocol family 38
[ 1.858184] Key type asymmetric registered
[ 1.858208] Asymmetric key parser 'x509' registered
[ 1.858313] bounce: pool size: 64 pages
[ 1.858628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.858803] io scheduler noop registered
[ 1.858832] io scheduler deadline registered
[ 1.859167] io scheduler cfq registered (default)
[ 1.873227] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.873288] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.874059] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 1.874136] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 1.880991] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
[ 1.882294] tegra-pmc 7000e400.pmc: emergency thermal reset enabled
[ 1.883072] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.893512] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 333, base_baud = 25500000) is a Tegra
[ 2.718638] console [ttyS0] enabled
[ 2.722870] Serial: AMBA driver
[ 2.727009] msm_serial: driver initialized
[ 2.731679] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 331, base_baud = 0) is a TEGRA_UART
[ 2.741100] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 332, base_baud = 0) is a TEGRA_UART
[ 2.752918] libphy: Fixed MDIO Bus: probed
[ 2.757522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.764092] ehci-pci: EHCI PCI platform driver
[ 2.768626] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.774845] ohci-pci: OHCI PCI platform driver
[ 2.779368] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.786007] usbcore: registered new interface driver usbserial
[ 2.791907] usbcore: registered new interface driver usbserial_generic
[ 2.798494] usbserial: USB Serial support registered for generic
[ 2.804773] mousedev: PS/2 mouse device common for all mice
[ 2.814246] device-mapper: uevent: version 1.0.3
[ 2.819399] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx
[ 2.828664] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.834925] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.840597] usbcore: registered new interface driver usbhid
[ 2.846195] usbhid: USB HID core driver
[ 2.854026] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 2.864616] drop_monitor: Initializing network drop monitor service
[ 2.871163] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.876588] Initializing XFRM netlink socket
[ 2.881954] NET: Registered protocol family 10
[ 2.888294] mip6: Mobile IPv6
[ 2.891309] NET: Registered protocol family 17
[ 2.896369] ThumbEE CPU extension supported.
[ 2.900680] Registering SWP/SWPB emulation handler
[ 2.906422] registered taskstats version 1
[ 2.910596] Loading compiled-in X.509 certificates
[ 2.928236] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 2.941570] Loaded X.509 cert 'Fedora kernel signing key: 1eb05d5db80ed03f8d40e0d4dbb9aa020b646a42'
[ 2.950866] zswap: loaded using pool lzo/zbud
[ 3.023254] +USB0_VBUS_SW: supplied by +5V_SYS
[ 3.028495] +5V_USB_HS: supplied by +5V_SYS
[ 3.034399] +5V_HDMI_CON: supplied by +5V_SYS
[ 3.039546] +5V_SATA: supplied by +5V_SYS
[ 3.044269] +12V_SATA: supplied by +VDD_MUX
[ 3.049369] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 3.056030] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 3.067030] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 3.077869] hctosys: unable to open rtc device (rtc0)
[ 3.083710] sr_init: No PMIC hook to init smartreflex
[ 3.089032] sr_init: platform driver register failed for SR
[ 3.109785] +3.3V_AVDD_HDMI_AP_GATED: disabling
[ 3.114367] +USB0_VBUS_SW: disabling
[ 3.117964] +5V_USB_HS: disabling
[ 3.121338] +1.05V_RUN_AVDD_HDMI_PLL: disabling
[ 3.125924] +5V_HDMI_CON: disabling
[ 3.129442] +5V_SATA: disabling
[ 3.132597] +12V_SATA: disabling
[ 3.137704] Freeing unused kernel memory: 1160K (c0c56000 - c0d78000)
[ 3.144233] This architecture does not have kernel memory protection.
[ 3.175673] systemd[1]: System time before build time, advancing clock.
[ 3.192577] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.201136] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.265906] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.284979] systemd[1]: Detected architecture arm.
[ 3.289854] systemd[1]: Running in initial RAM disk.
Welcome to Fedora 25 (Twenty Five) dracut-044-77.fc25 (Initramfs)!
[ 3.314573] systemd[1]: No hostname configured.
[ 3.319150] systemd[1]: Set hostname to <localhost>.
[ 3.630810] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.637790] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.645001] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.656649] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.666906] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.673932] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.681908] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.697434] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.729784] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 3.749925] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 3.769604] systemd[1]: Reached target Local File Systems.
[ OK ] Reached target Local File Systems.
[ 3.789634] systemd[1]: Reached target Timers.
[ OK ] Reached target Timers.
[ 3.809769] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on Journal Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Swap.
[ OK ] Created slice System Slice.
[ OK ] Reached target Slices.
Starting Setup Virtual Console...
Starting Journal Service...
Starting dracut cmdline hook...
Starting Create list of required st... nodes for the current kernel...
Starting Apply Kernel Variables...
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ 4.084690] audit: type=1130 audit(1469476187.904:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Started Apply Kernel Variables.
[ 4.124977] audit: type=1130 audit(1469476187.944:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Started Journal Service.
[ 4.164991] audit: type=1130 audit(1469476187.984:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Starting Create Static Device Nodes in /dev...
[ OK ] Started Create Static Device Nodes in /dev.
[ 4.259615] audit: type=1130 audit(1469476188.079:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Started Setup Virtual Console.
[ 4.329597] audit: type=1130 audit(1469476188.149:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.479269] random: fast init done
[ OK ] Started dracut cmdline hook.
[ 4.639771] audit: type=1130 audit(1469476188.459:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Starting dracut pre-udev hook...
[ OK ] Started dracut pre-udev hook.
[ 4.899791] audit: type=1130 audit(1469476188.719:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
[ 4.999846] audit: type=1130 audit(1469476188.819:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Starting udev Coldplug all Devices...
Mounting Configuration File System...
[ OK ] Mounted Configuration File System.
[ OK ] Started udev Coldplug all Devices.
[ 5.449543] audit: type=1130 audit(1469476189.269:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.528324] as3722 4-0040: AS3722 with revision 0x1 found
[ 5.528919] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 5.528992] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 5.532887] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 5.583206] sdhci: Secure Digital Host Controller Interface driver
[ 5.589576] sdhci: Copyright(c) Pierre Ossman
Starting Show Plymouth Boot Screen...
[ 5.608086] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.608361] tegra-pce 1003000.pcie-controller: 2x1, 1x1 configuration
[ 5.608452] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 5.611941] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 5.647160] +3.3V_RUN: supplied by +3.3V_SYS
[ 5.647166] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
[ 5.647179] as3722-rtc as3722-rtc: RTC interrupt 375
[ 5.652923] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
[ 5.652993] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[ 5.653207] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 5.653235] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 5.653615] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
Starting dracut initqueue hook.[ 5.653868] mmc0: Unknown controller version (3). You may experience problems.
..
[ OK ] Reached target System Initialization.
[ OK ] Started Show[ 5.709501] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
Plymouth Boot Screen.
[ OK ] Started Forward Password Re[ 5.710194] +3.3V_LP0: supplied by +3.3V_SYS
quests to Plymouth Directory Watch.
[ OK ] Reached target Paths.
[ OK [ 5.711337] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
] Reached target Basic Syste[ 5.711398] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
m.
[ 5.715431] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 5.718231] mmc0: Invalid maximum block size, assuming 512 bytes
[ 5.720287] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 5.720321] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 5.721106] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
[ 5.779729] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
[ 5.780341] tegra-phy 7d004000.usb-phy: no vbus regulator
[ 5.784509] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 5.784596] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 5.787248] input: gpio-keys as /devices/soc0/gpio-keys/input/input0
[ 5.787911] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 5.792302] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 5.792336] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 5.793123] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
[ 5.793535] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 5.793605] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 5.796730] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 5.805650] tegra-ehci: Tegra EHCI driver
[ 5.808702] tegra-ehci 7d004000.usb: EHCI Host Controller
[ 5.811736] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
[ 5.821692] tegra-ehci 7d004000.usb: irq 352, io mem 0x7d004000
[ 5.834286] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
[ 5.834648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.834657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.834663] usb usb1: Product: EHCI Host Controller
[ 5.834670] usb usb1: Manufacturer: Linux 4.8.3-300.fc25.armv7hl ehci_hcd
[ 5.834676] usb usb1: SerialNumber: 7d004000.usb
[ 5.835688] hub 1-0:1.0: USB hub found
[ 5.835749] hub 1-0:1.0: 1 port detected
[ 5.837006] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 5.837037] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 5.837880] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
[ 5.838389] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 5.838460] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 5.842100] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 5.846347] tegra-ehci 7d008000.usb: EHCI Host Controller
[ 5.847665] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 5.847701] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 5.848526] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
[ 5.849033] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 5.849095] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 5.852867] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 5.853145] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
[ 5.853542] tegra-ehci 7d008000.usb: irq 353, io mem 0x7d008000
[ 5.864451] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
[ 5.864853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.864862] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.864871] usb usb2: Product: EHCI Host Controller
[ 5.864878] usb usb2: Manufacturer: Linux 4.8.3-300.fc25.armv7hl ehci_hcd
[ 5.864884] usb usb2: SerialNumber: 7d008000.usb
[ 5.865947] hub 2-0:1.0: USB hub found
[ 5.866015] hub 2-0:1.0: 1 port detected
[ 5.867081] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 5.867105] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 5.867972] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
[ 5.868570] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 5.868632] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 5.872592] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 5.878540] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 5.878576] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 5.879553] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
[ 5.880043] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 5.880105] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
[ 5.884137] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
[ 5.946189] mmc0: new high speed MMC card at address 0001
[ 5.956236] as3722-sd2: supplied by +5V_SYS
[ 5.957990] mmcblk0: mmc0:0001 SEM16G 14.7 GiB
[ 5.958526] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
[ 5.959100] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
[ 5.960527] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
[ 5.970644] as3722-sd3: supplied by +5V_SYS
[ 5.985383] as3722-sd4: supplied by +5V_SYS
[ 5.990379] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 5.995736] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
[ 5.995894] as3722-sd5: supplied by +5V_SYS
[ 5.999041] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 5.999070] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 5.999995] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
[ 6.000483] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 6.001220] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avdd-pll-erefe': -517
[ 6.012368] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 6.012395] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 6.013245] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
[ 6.013728] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 6.014805] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avdd-pll-erefe': -517
[ 6.043673] as3722-ldo0: supplied by +1.35V_LP0(sd2)
[ 6.079871] as3722-ldo1: supplied by +3.3V_RUN
[ 6.087897] as3722-ldo2: supplied by +1.8V_VDDIO
[ 6.111159] as3722-ldo3: supplied by +3.3V_SYS
[ 6.112506] as3722-ldo4: supplied by +3.3V_SYS
[ 6.126532] as3722-ldo5: supplied by +1.8V_VDDIO
[ 6.136632] as3722-ldo6: supplied by +3.3V_RUN
[ 6.150281] as3722-ldo7: supplied by +1.8V_VDDIO
[ 6.165254] as3722-ldo9: supplied by +5V_SYS
[ 6.185748] as3722-ldo10: supplied by +5V_SYS
[ 6.197808] as3722-ldo11: supplied by +3.3V_RUN
[ 6.207515] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[ 6.207544] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[ 6.207925] mmc1: Unknown controller version (3). You may experience problems.
[ 6.208231] mmc1: Invalid maximum block size, assuming 512 bytes
[ 6.267344] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
[ 6.268216] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
[ 6.268692] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 6.269912] tegra-pcie 1003000.pcie-controller: failed to get PHY#0: -517
[ 6.269921] tegra-pcie 1003000.pcie-controller: failed to get PHYs: -517
[ 6.269930] tegra-pcie 1003000.pcie-controller: failed to request resources: -517
[ 6.411800] mmc1: new high speed SDHC card at address aaaa
[ 6.418364] mmcblk1: mmc1:aaaa SE32G 29.7 GiB
[ 6.425251] mmcblk1: p1 p2 p3
[ 6.435544] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
[ 6.442856] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[ 6.450383] tegra-pcie 1003000.pcie-controller: failed to get PHY#0: -517
[ 6.457238] tegra-pcie 1003000.pcie-controller: failed to get PHYs: -517
[ 6.464048] tegra-pcie 1003000.pcie-controller: failed to request resources: -517
[ 58.409310] random: crng init done
[ 142.748610] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 143.353006] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 143.916628] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 144.481394] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 145.048098] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 145.612526] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 146.177861] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 146.742508] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 147.305620] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 147.870576] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 148.433045] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 148.999515] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 149.566326] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 150.131743] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 150.697760] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 151.261436] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 151.826533] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 152.394444] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 152.960776] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 153.526535] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 154.089920] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 154.653009] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 155.218249] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 155.784816] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 156.351051] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 156.913121] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 157.476183] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 158.039140] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 158.603254] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 159.170522] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 159.734909] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 160.297971] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 160.861328] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 161.424643] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 161.988050] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 162.551719] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 163.115576] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 163.678152] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 164.242764] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 164.807533] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 165.372105] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 165.934428] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 166.503454] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 167.067895] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 167.633440] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 168.196781] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 168.759862] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 169.322826] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 169.887382] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 170.450859] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 171.015779] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 171.578157] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 172.142459] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 172.705833] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 173.271798] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 173.838257] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 174.402870] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 174.968139] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 175.533719] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 176.096959] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 176.663131] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 177.226548] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 177.789889] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 178.354932] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 178.919879] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 179.489189] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 180.055571] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 180.622461] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 181.187081] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 181.755120] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 182.319783] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 182.884978] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 183.454036] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 184.020331] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 184.586116] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 185.151866] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 185.718200] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 186.286370] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 186.848202] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 187.411797] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 187.976636] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 188.541922] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 189.110126] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 189.678037] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 190.245865] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 190.814258] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 191.378871] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 191.946961] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 192.513975] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 193.083188] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 193.649627] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 194.212954] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 194.777064] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 195.344101] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 195.913167] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 196.480161] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 197.042852] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 197.610178] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 198.177703] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 198.743984] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 199.309967] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 199.872753] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 200.438440] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 201.007018] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 201.570861] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 202.138947] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 202.705488] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 203.269784] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 203.834831] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 204.401837] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 204.968514] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 205.531688] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 206.100173] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 206.664853] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 207.232602] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 207.798090] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 208.365078] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 208.931565] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 209.496628] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 210.060518] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 210.062510] dracut-initqueue[312]: Warning: Could not boot.
Starting dracut initqueue hook...
[ OK ] Reached target System Initialization.
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password Requests to Plymouth Directory Watch.
[ OK ] Reached target Paths.
[ OK ] Reached target Basic System.
[ 142.748610] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 143.353006] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 143.916628] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 144.481394] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 145.048098] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 145.612526] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 146.177861] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 146.742508] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 147.305620] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 147.870576] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 148.433045] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 148.999515] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 149.566326] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 150.131743] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 150.697760] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 151.261436] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 151.826533] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 152.394444] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 152.960776] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 153.526535] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 154.089920] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 154.653009] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 155.218249] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 155.784816] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 156.351051] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 156.913121] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 157.476183] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 158.039140] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 158.603254] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 159.170522] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 159.734909] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 160.297971] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 160.861328] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 161.424643] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 161.988050] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 162.551719] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 163.115576] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 163.678152] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 164.242764] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 164.807533] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 165.372105] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 165.934428] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 166.503454] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 167.067895] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 167.633440] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 168.196781] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 168.759862] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 169.322826] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 169.887382] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 170.450859] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 171.015779] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 171.578157] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 172.142459] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 172.705833] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 173.271798] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 173.838257] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 174.402870] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 174.968139] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 175.533719] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 176.096959] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 176.663131] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 177.226548] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 177.789889] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 178.354932] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 178.919879] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 179.489189] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 180.055571] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 180.622461] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 181.187081] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 181.755120] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 182.319783] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 182.884978] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 183.454036] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 184.020331] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 184.586116] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 185.151866] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 185.718200] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 186.286370] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 186.848202] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 187.411797] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 187.976636] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 188.541922] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 189.110126] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 189.678037] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 190.245865] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 190.814258] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 191.378871] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 191.946961] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 192.513975] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 193.083188] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 193.649627] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 194.212954] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 194.777064] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 195.344101] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 195.913167] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 196.480161] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 197.042852] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 197.610178] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 198.177703] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 198.743984] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 199.309967] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 199.872753] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 200.438440] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 201.007018] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 201.570861] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 202.138947] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 202.705488] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 203.269784] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 203.834831] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 204.401837] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 204.968514] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 205.531688] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 206.100173] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 206.664853] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 207.232602] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 207.798090] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 208.365078] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 208.931565] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 209.496628] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 210.060518] dracut-initqueue[312]: Warning: dracut-initqueue timeout - starting timeout scripts
[ 210.062510] dracut-initqueue[312]: Warning: Could not boot.
[ 211.079401] dracut-initqueue[312]: Warning: /dev/sda2 does not exist
Starting Dracut Emergency Shell...
[ 211.294064] audit_printk_skb: 3 callbacks suppressed
[ 211.299146] audit: type=1131 audit(1469476395.109:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Warning: /dev/sda2 does not exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot
after mounting them and attach it to a bug report.
dracut:/#
_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
