Peter Robinson <pbrobinson@xxxxxxxxx> on Tue, 25 Oct 2016 10:23:13 wrote:
>There's a new 4.8.4-301.fc25 kernel that I think should fix this issue
No improvement with this new kernel. I set default to multi-user.target
in an attempt to avoid any X11 confusion. After several screens of boot
messages scroll past, the display goes dark (no loss of input signal -
the monitor would report that.)
Display device is Viewsonic model VX2235wm (native resolution 1680x1050) with
DVI-D input connected to my RPi HDMI port.
Is this kernel supposed to avoid the "i2c-bcm2835 3f805000.i2c: i2c
transfer failed: 100" messages that clutter dmesg and the journal?
I have not tried to perform any direct measurement, but the time when the
display goes dark seems to be near 27 seconds when these messages first
appear.
dmesg output:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.8.4-301.fc25.armv7hl (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 6.2.1 20160916 (Red Hat 6.2.1-2) (GCC) ) #1 SMP Tue Oct 25 02:01:39 UTC 2016
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 256 MiB at 0x20000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 253952
[ 0.000000] free_area_init_node: node 0, pgdat c0e66b80, node_mem_map df6c1000
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 57344 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 15 pages/cpu @df67a000 s31500 r8192 d21748 u61440
[ 0.000000] pcpu-alloc: s31500 r8192 d21748 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 252224
[ 0.000000] Kernel command line: ro root=UUID=6ce3f499-c222-4d7b-a3d6-a0a4e28340a5 cma=192MB cma=256MB LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 715032K/1015808K available (7032K kernel code, 1092K rwdata, 3288K rodata, 1160K init, 853K bss, 38632K reserved, 262144K cma-reserved, 229376K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0208000 - 0xc08e6534 (7034 kB)
.init : 0xc0c56000 - 0xc0d78000 (1160 kB)
.data : 0xc0d78000 - 0xc0e89184 (1093 kB)
.bss : 0xc0e89184 - 0xc0f5e730 ( 854 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000016] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000040] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000122] bcm2835: system timer (irq = 33)
[ 0.001390] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
[ 0.001400] arm_arch_timer: WARNING: Please fix your firmware
[ 0.001415] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
[ 0.001424] arm_arch_timer: WARNING: Please fix your firmware
[ 0.001555] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.001575] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.001597] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.001614] Switching to timer-based delay loop, resolution 52ns
[ 0.002080] Console: colour dummy device 80x30
[ 0.003737] console [tty0] enabled
[ 0.003827] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=96000)
[ 0.003914] pid_max: default: 32768 minimum: 301
[ 0.004440] Security Framework initialized
[ 0.004487] Yama: becoming mindful.
[ 0.004549] SELinux: Initializing.
[ 0.004841] SELinux: Starting in permissive mode
[ 0.005225] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.005279] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006903] CPU: Testing write buffer coherency: ok
[ 0.006988] ftrace: allocating 30365 entries in 60 pages
[ 0.098482] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.098618] Setting up static identity map for 0x208280 - 0x208318
[ 0.104454] EFI services will not be available.
[ 0.105715] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
[ 0.105718] arm_arch_timer: WARNING: Please fix your firmware
[ 0.105727] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
[ 0.105730] arm_arch_timer: WARNING: Please fix your firmware
[ 0.105749] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.106567] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
[ 0.106571] arm_arch_timer: WARNING: Please fix your firmware
[ 0.106576] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
[ 0.106579] arm_arch_timer: WARNING: Please fix your firmware
[ 0.106592] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.107337] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
[ 0.107340] arm_arch_timer: WARNING: Please fix your firmware
[ 0.107346] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
[ 0.107349] arm_arch_timer: WARNING: Please fix your firmware
[ 0.107361] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.107454] Brought up 4 CPUs
[ 0.108167] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.108205] CPU: All CPU(s) started in HYP mode.
[ 0.108239] CPU: Virtualization extensions available.
[ 0.109727] devtmpfs: initialized
[ 0.114910] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.115357] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[ 0.127440] atomic64_test: passed
[ 0.127586] pinctrl core: initialized pinctrl subsystem
[ 0.129165] NET: Registered protocol family 16
[ 0.130841] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.143002] cpuidle: using governor menu
[ 0.143289] No ATAGs?
[ 0.143324] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.143409] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.144233] Serial: AMBA PL011 UART driver
[ 0.182716] vgaarb: loaded
[ 0.183714] SCSI subsystem initialized
[ 0.183928] libata version 3.00 loaded.
[ 0.184293] usbcore: registered new interface driver usbfs
[ 0.184418] usbcore: registered new interface driver hub
[ 0.184562] usbcore: registered new device driver usb
[ 0.186203] NetLabel: Initializing
[ 0.186240] NetLabel: domain hash size = 128
[ 0.186275] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.186386] NetLabel: unlabeled traffic allowed by default
[ 0.186792] clocksource: Switched to clocksource arch_sys_counter
[ 0.248420] VFS: Disk quotas dquot_6.6.0
[ 0.248575] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.249137] simple-framebuffer 3e699000.framebuffer: framebuffer at 0x3e699000, 0x35d540 bytes, mapped to 0xf0880000
[ 0.249212] simple-framebuffer 3e699000.framebuffer: format=r5g6b5, mode=1680x1050x16, linelength=3360
[ 0.274771] Console: switching to colour frame buffer device 210x65
[ 0.298449] simple-framebuffer 3e699000.framebuffer: fb0: simplefb registered!
[ 0.312947] NET: Registered protocol family 2
[ 0.314205] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.314503] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.314841] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.315096] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.315280] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.315838] NET: Registered protocol family 1
[ 0.315980] PCI: CLS 0 bytes, default 64
[ 0.316433] Unpacking initramfs...
[ 1.813829] Freeing initrd memory: 14412K (c2100000 - c2f13000)
[ 1.822145] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.822461] audit: initializing netlink subsys (disabled)
[ 1.822662] audit: type=2000 audit(1.764:1): initialized
[ 1.823410] Initialise system trusted keyrings
[ 1.823940] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 1.835996] zbud: loaded
[ 1.840306] Key type big_key registered
[ 1.840411] SELinux: Registering netfilter hooks
[ 2.369025] NET: Registered protocol family 38
[ 2.369176] Key type asymmetric registered
[ 2.369283] Asymmetric key parser 'x509' registered
[ 2.369508] bounce: pool size: 64 pages
[ 2.370000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 2.370322] io scheduler noop registered
[ 2.370426] io scheduler deadline registered
[ 2.370903] io scheduler cfq registered (default)
[ 2.377313] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.377500] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.380220] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.391178] bcm2835-aux-uart 3f215040.serial: could not get clk: -517
[ 2.391832] Serial: AMBA driver
[ 2.398856] msm_serial: driver initialized
[ 2.408036] libphy: Fixed MDIO Bus: probed
[ 2.414670] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.421003] ehci-pci: EHCI PCI platform driver
[ 2.427361] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.433700] ohci-pci: OHCI PCI platform driver
[ 2.440031] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.446663] usbcore: registered new interface driver usbserial
[ 2.453050] usbcore: registered new interface driver usbserial_generic
[ 2.459353] usbserial: USB Serial support registered for generic
[ 2.465818] mousedev: PS/2 mouse device common for all mice
[ 2.474628] device-mapper: uevent: version 1.0.3
[ 2.481388] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx
[ 2.488421] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.495042] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.501674] usbcore: registered new interface driver usbhid
[ 2.508101] usbhid: USB HID core driver
[ 2.517577] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 2.524885] drop_monitor: Initializing network drop monitor service
[ 2.531822] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.538515] Initializing XFRM netlink socket
[ 2.546368] NET: Registered protocol family 10
[ 2.554414] mip6: Mobile IPv6
[ 2.560927] NET: Registered protocol family 17
[ 2.567605] Registering SWP/SWPB emulation handler
[ 2.575010] registered taskstats version 1
[ 2.581391] Loading compiled-in X.509 certificates
[ 2.600211] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 2.616249] Loaded X.509 cert 'Fedora kernel signing key: d40a0c829cfc19df12767ad4d16167d3c4a2d206'
[ 2.622894] zswap: loaded using pool lzo/zbud
[ 2.735670] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 2.744119] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 59, base_baud = 31224999) is a 16550
[ 2.751539] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-09-13 17:02
[ 2.758571] hctosys: unable to open rtc device (rtc0)
[ 2.765479] sr_init: No PMIC hook to init smartreflex
[ 2.772053] sr_init: platform driver register failed for SR
[ 2.782503] PM: Hibernation image not present or could not be loaded.
[ 2.786016] Freeing unused kernel memory: 1160K (c0c56000 - c0d78000)
[ 2.792530] This architecture does not have kernel memory protection.
[ 2.827941] systemd[1]: System time before build time, advancing clock.
[ 2.840726] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.849045] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.879134] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.886879] systemd[1]: Detected architecture arm.
[ 2.893862] systemd[1]: Running in initial RAM disk.
[ 2.923297] systemd[1]: Set hostname to <RPi3-1>.
[ 3.233174] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.240619] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.248223] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.260543] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.270966] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.278056] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.286187] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.302187] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.337606] systemd[1]: Listening on udev Kernel Socket.
[ 3.351772] systemd[1]: Reached target Local File Systems.
[ 3.365869] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.382720] systemd[1]: Created slice System Slice.
[ 3.396775] systemd[1]: Reached target Slices.
[ 3.410908] systemd[1]: Listening on udev Control Socket.
[ 3.631506] audit: type=1130 audit(1469476187.794:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.658305] audit: type=1130 audit(1469476187.824:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.710375] audit: type=1130 audit(1469476187.874:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.744219] audit: type=1130 audit(1469476187.909:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.085219] audit: type=1130 audit(1469476188.249:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.125283] audit: type=1130 audit(1469476188.289:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.399871] audit: type=1130 audit(1469476188.564:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.478742] audit: type=1130 audit(1469476188.644:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.904865] audit: type=1130 audit(1469476189.069:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.921442] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property
[ 4.963074] sdhci: Secure Digital Host Controller Interface driver
[ 4.973988] sdhci: Copyright(c) Pierre Ossman
[ 4.996883] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.067012] mmc0: SDHCI controller on 3f300000.sdhci [3f300000.sdhci] using PIO
[ 5.114968] mmc0: new SDHC card at address 0001
[ 5.133235] mmcblk0: mmc0:0001 00000 29.8 GiB
[ 5.136071] mmcblk0: p1 p2 p3 p4
[ 5.159922] random: fast init done
[ 6.122842] random: crng init done
[ 15.565970] audit_printk_skb: 6 callbacks suppressed
[ 15.565978] audit: type=1130 audit(1469476199.729:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.768510] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[ 16.469045] audit: type=1130 audit(1469476200.634:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 16.494092] audit: type=1131 audit(1469476200.664:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 16.996148] audit: type=1130 audit(1469476201.159:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.123745] audit: type=1130 audit(1469476201.289:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.123865] audit: type=1131 audit(1469476201.289:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.181003] audit: type=1131 audit(1469476201.344:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.243329] audit: type=1130 audit(1469476201.409:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.243448] audit: type=1131 audit(1469476201.409:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.387837] audit: type=1130 audit(1469476201.554:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.743779] systemd-journald[170]: Received SIGTERM from PID 1 (systemd).
[ 17.894190] systemd: 14 output lines suppressed due to ratelimiting
[ 19.017378] SELinux: 32768 avtab hash slots, 106608 rules.
[ 19.164487] SELinux: 32768 avtab hash slots, 106608 rules.
[ 19.559695] SELinux: 8 users, 14 roles, 5063 types, 305 bools, 1 sens, 1024 cats
[ 19.559712] SELinux: 94 classes, 106608 rules
[ 19.595070] SELinux: Permission validate_trans in class security not defined in policy.
[ 19.605868] SELinux: Permission module_load in class system not defined in policy.
[ 19.617392] SELinux: the above unknown classes and permissions will be allowed
[ 19.628252] SELinux: Completing initialization.
[ 19.628256] SELinux: Setting up existing superblocks.
[ 19.708295] systemd[1]: Successfully loaded SELinux policy in 1.094249s.
[ 20.126989] systemd[1]: Relabelled /dev and /run in 182.498ms.
[ 21.613503] audit_printk_skb: 54 callbacks suppressed
[ 21.623712] audit: type=1130 audit(1469476205.779:41): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.644762] audit: type=1131 audit(1469476205.809:42): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.669668] audit: type=1130 audit(1469476205.834:43): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.669787] audit: type=1131 audit(1469476205.834:44): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.715341] audit: type=1130 audit(1469476205.879:45): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.715459] audit: type=1131 audit(1469476205.879:46): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.862317] audit: type=1305 audit(1469476206.029:47): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:syslogd_t:s0 res=1
[ 21.879997] audit: type=1130 audit(1469476206.049:48): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.880132] audit: type=1131 audit(1469476206.049:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.061695] EXT4-fs (mmcblk0p4): re-mounted. Opts: (null)
[ 22.186416] RPC: Registered named UNIX socket transport module.
[ 22.197470] RPC: Registered udp transport module.
[ 22.208474] RPC: Registered tcp transport module.
[ 22.219577] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 22.422803] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 22.439075] audit: type=1130 audit(1469476206.604:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 22.724150] systemd-journald[414]: Received request to flush runtime journal from PID 1
[ 22.894755] systemd-journald[414]: File /var/log/journal/3dad117e20a544249d4fa3919c15f9ac/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 25.577217] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 26.091545] [drm] Initialized drm 1.1.0 20060810
[ 26.582892] bcm2835-rng 3f104000.rng: hwrng registered
[ 26.595982] 3f980000.usb supply vusb_d not found, using dummy regulator
[ 26.652933] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
[ 26.660246] 3f980000.usb supply vusb_a not found, using dummy regulator
[ 26.755876] Adding 499708k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:499708k SSFS
[ 26.916852] dwc2 3f980000.usb: Specified GNPTXFDEP=1024 > 256
[ 26.925092] dwc2 3f980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
[ 26.934528] dwc2 3f980000.usb: DWC OTG Controller
[ 26.943777] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
[ 26.952069] dwc2 3f980000.usb: irq 39, io mem 0x00000000
[ 26.960560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 26.968868] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 26.977103] usb usb1: Product: DWC OTG Controller
[ 26.985216] usb usb1: Manufacturer: Linux 4.8.4-301.fc25.armv7hl dwc2_hsotg
[ 26.993371] usb usb1: SerialNumber: 3f980000.usb
[ 27.003011] hub 1-0:1.0: USB hub found
[ 27.011258] hub 1-0:1.0: 1 port detected
[ 27.028752] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 27.037305] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 27.045946] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 27.054599] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 27.063115] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 27.071465] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ 27.079727] checking generic (3e699000 35d540) vs hw (0 ffffffff)
[ 27.079735] fb: switching to vc4drmfb from simple
[ 27.088155] Console: switching to colour dummy device 80x30
[ 27.090873] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 27.090926] [drm] Driver supports precise vblank timestamp query.
[ 27.091185] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 27.091372] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 27.091554] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 27.091733] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 27.091918] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 27.091980] vc4-drm soc:gpu: No connectors reported connected with modes
[ 27.092029] [drm] Cannot find any crtc or sizes - going 1024x768
[ 27.097355] Console: switching to colour frame buffer device 128x48
[ 27.116348] vc4-drm soc:gpu: fb0: frame buffer device
[ 27.344631] EXT4-fs (mmcblk0p2): recovery complete
[ 27.354188] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 27.426939] usb 1-1: new high-speed USB device number 2 using dwc2
[ 27.506851] audit_printk_skb: 33 callbacks suppressed
[ 27.507087] audit: type=1130 audit(1469476211.669:62): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 27.524450] audit: type=1130 audit(1469476211.689:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 27.525517] audit: type=1131 audit(1469476211.689:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 27.548829] audit: type=1130 audit(1469476211.714:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 27.569584] audit: type=1131 audit(1469476211.734:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 27.637173] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 27.647752] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 27.661417] hub 1-1:1.0: USB hub found
[ 27.672453] hub 1-1:1.0: 5 ports detected
[ 27.756865] audit: type=1130 audit(1469476211.919:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 27.971879] usb 1-1.1: new high-speed USB device number 3 using dwc2
[ 28.092264] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 28.092274] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 28.176877] usb 1-1.5: new full-speed USB device number 4 using dwc2
[ 28.240399] audit: type=1130 audit(1469476212.404:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 28.290710] usb 1-1.5: New USB device found, idVendor=046d, idProduct=c52b
[ 28.302414] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 28.314170] usb 1-1.5: Product: USB Receiver
[ 28.325964] usb 1-1.5: Manufacturer: Logitech
[ 28.429561] smsc95xx v1.0.4
[ 28.536609] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:dd:7f:d3
[ 28.562007] usbcore: registered new interface driver smsc95xx
[ 28.700288] audit: type=1305 audit(1469476212.864:69): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 28.727031] audit: type=1305 audit(1469476212.894:70): audit_pid=527 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 28.736866] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.5/input2
[ 28.916752] input: Logitech K360 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:4004.0004/input/input0
[ 28.947837] logitech-hidpp-device 0003:046D:4004.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K360] on usb-3f980000.usb-1.5:1
[ 28.985026] input: Logitech Anywhere MX as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:1017.0005/input/input1
[ 28.986394] logitech-hidpp-device 0003:046D:1017.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Anywhere MX] on usb-3f980000.usb-1.5:2
[ 37.332049] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 37.346890] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 37.353827] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 37.360570] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 37.367082] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 37.373272] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 37.379057] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 37.384737] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 37.390257] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 37.395546] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 38.514031] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 38.832833] Ebtables v2.0 registered
[ 39.087235] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 39.839130] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 40.324553] Netfilter messages via NETLINK v0.30.
[ 40.406397] ip_set: protocol 6
[ 41.612459] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.689301] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 43.206500] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 47.572088] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 47.572473] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 47.572836] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 47.573200] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 47.573558] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 57.807333] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 57.807739] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 57.808120] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 57.808502] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 57.808883] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 68.047381] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 68.047761] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 68.048125] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 68.048488] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 68.048850] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 78.287447] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 78.287829] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 78.288190] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 78.288551] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 78.288919] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 88.527498] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 88.527876] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 88.528238] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 88.528601] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 88.528963] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 98.767555] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 98.767934] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 98.768299] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 98.768660] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 98.769022] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 109.007612] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 109.007989] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 109.008352] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 109.008715] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 109.009075] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 119.247707] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 119.248101] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 119.248466] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 119.248827] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 119.249190] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 129.487937] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 129.488319] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 129.488682] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 129.490897] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 129.493058] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 139.728160] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 139.730079] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 139.731714] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 139.733087] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 139.734466] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 149.968383] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 149.969803] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 149.971188] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 149.972563] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 149.973981] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 160.208607] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 160.210038] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 160.211442] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 160.212834] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 160.214271] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 168.516125] fuse init (API version 7.25)
[ 170.448876] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 170.450730] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 170.452474] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 170.454257] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 170.456021] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 180.689071] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 180.690842] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 180.692563] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 180.694322] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 180.696052] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 190.923252] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 190.925015] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 190.926731] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 190.928487] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 190.930211] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 201.163343] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 201.165120] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 201.166848] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 201.168635] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 201.170386] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 211.403382] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 211.405178] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 211.406911] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 211.408680] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 211.410431] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 221.643646] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 221.645462] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 221.647216] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 221.649007] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 221.650766] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 231.883501] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 231.885311] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 231.887059] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 231.888836] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 231.890584] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 242.123535] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 242.125342] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 242.127091] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 242.128886] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 242.130649] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 251.435363] FS-Cache: Loaded
[ 251.501128] FS-Cache: Netfs 'nfs' registered for caching
[ 251.527939] Key type dns_resolver registered
[ 251.628706] NFS: Registering the id_resolver key type
[ 251.630863] Key type id_resolver registered
[ 251.634410] Key type id_legacy registered
[ 252.363633] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 252.366083] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 252.368313] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 252.370577] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 252.372811] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 262.603724] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 262.606014] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 262.608238] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 262.610504] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 262.612749] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 272.843833] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 272.846122] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 272.848357] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 272.850632] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
[ 272.852885] i2c-bcm2835 3f805000.i2c: i2c transfer failed: 100
_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
