Ok. It seems I got a lot further with the armsoc driver but Xorg still
fails. This time _CREATE_GEM cannot allocate memory for a scanout buffer.
Here is what I did. I actually copied the Ubuntu /etc/X11/xorg.conf
file to my /etc/X11 directory.
The following is the content of both the /etc/X11 directory and the
xorg.conf file but ONLY the xorg.conf file is non-stock Fedora:
ls -l
total 28
drwxr-xr-x 2 root root 4096 Feb 3 2016 applnk
drwxr-xr-x 2 root root 4096 Jun 14 12:36 fontpath.d
drwxr-xr-x 5 root root 4096 Jun 29 05:30 xinit
-rw-r--r-- 1 root root 547 Feb 5 2016 Xmodmap
-rw-r--r-- 1 root root 687 Aug 11 07:18 xorg.conf
drwxr-xr-x 2 root root 4096 Jul 21 02:32 xorg.conf.d
-rw-r--r-- 1 root root 493 Feb 5 2016 Xresources
***************************
cat xorg.conf
Section "Device"
Identifier "Mali-Fbdev"
Driver "armsoc"
Option "fbdev" "/dev/fb0"
Option "Debug" "false"
Option "DPMS" "false"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Mali-Fbdev"
DefaultDepth 24
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "DRI"
Mode 0666
EndSection
***************************************
Following is the "startx" output:
[root@myodroid X11]# startx
xauth: file /root/.serverauth.17042 does not exist
X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: 4.6.3-300.fc24.armv7hl
Current Operating System: Linux myodroid 4.6.5-300.fc24.armv7hl #1 SMP
Thu Jul 28 03:09:19 UTC 2016 armv7l
Kernel command line:
rd.driver.pre=dw_mmc-exynos,exynosdrm,ehci-exynos,ohci-exynos ro
root=UUID=dfac3a15-7d31-46ed-842f-2f7599871202 LANG=en_US.UTF-8
Build Date: 19 July 2016 06:13:15PM
Build ID: xorg-x11-server 1.18.4-1.fc24
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 12 17:00:51 2016
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE)
Fatal server error:
(EE) AddScreen/ScreenInit failed for driver 0
(EE)
(EE)
Please consult the Fedora Project support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
********************************
And here is the content of /var/log/Xorg.0.log
[root@myodroid log]# cat Xorg.0.log
[116289.200]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[116289.200] X Protocol Version 11, Revision 0
[116289.200] Build Operating System: 4.6.3-300.fc24.armv7hl
[116289.200] Current Operating System: Linux myodroid
4.6.5-300.fc24.armv7hl #1 SMP Thu Jul 28 03:09:19 UTC 2016 armv7l
[116289.200] Kernel command line:
rd.driver.pre=dw_mmc-exynos,exynosdrm,ehci-exynos,ohci-exynos ro
root=UUID=dfac3a15-7d31-46ed-842f-2f7599871202 LANG=en_US.UTF-8
[116289.201] Build Date: 19 July 2016 06:13:15PM
[116289.201] Build ID: xorg-x11-server 1.18.4-1.fc24
[116289.201] Current version of pixman: 0.34.0
[116289.201] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[116289.201] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[116289.202] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 12
17:00:51 2016
[116289.203] (==) Using config file: "/etc/X11/xorg.conf"
[116289.203] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[116289.205] (==) ServerLayout "Default Layout"
[116289.205] (**) |-->Screen "Default Screen" (0)
[116289.205] (**) | |-->Monitor "<default monitor>"
[116289.206] (**) | |-->Device "Mali-Fbdev"
[116289.206] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[116289.206] (**) Option "BlankTime" "0"
[116289.206] (**) Option "StandbyTime" "0"
[116289.206] (**) Option "SuspendTime" "0"
[116289.206] (**) Option "OffTime" "0"
[116289.206] (==) Automatically adding devices
[116289.206] (==) Automatically enabling devices
[116289.206] (==) Automatically adding GPU devices
[116289.206] (==) Max clients allowed: 256, resource mask: 0x1fffff
[116289.207] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[116289.207] (==) ModulePath set to "/usr/lib/xorg/modules"
[116289.207] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[116289.207] (II) Loader magic: 0x1fcf3c
[116289.207] (II) Module ABI versions:
[116289.207] X.Org ANSI C Emulation: 0.4
[116289.207] X.Org Video Driver: 20.0
[116289.207] X.Org XInput driver : 22.1
[116289.207] X.Org Server Extension : 9.0
[116289.210] (--) using VT number 2
[116289.210] (II) systemd-logind: logind integration requires -keeptty
and -keeptty was not provided, disabling logind integration
[116289.213] (II) xfree86: Adding drm device (/dev/dri/card0)
[116289.266] (II) no primary bus or device found
[116289.266] falling back to /sys/devices/platform/exynos-drm/drm/card0
[116289.267] (II) LoadModule: "glx"
[116289.267] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[116289.291] (II) Module glx: vendor="X.Org Foundation"
[116289.291] compiled for 1.18.4, module version = 1.0.0
[116289.291] ABI class: X.Org Server Extension, version 9.0
[116289.291] (==) AIGLX enabled
[116289.291] (II) LoadModule: "armsoc"
[116289.292] (II) Loading /usr/lib/xorg/modules/drivers/armsoc_drv.so
[116289.292] (II) Module armsoc: vendor="X.Org Foundation"
[116289.293] compiled for 1.18.0, module version = 0.6.0
[116289.293] Module class: X.Org Video Driver
[116289.293] ABI class: X.Org Video Driver, version 20.0
[116289.293] (II) ARMSOC: Driver for ARM Mali compatible chipsets
[116289.349] (WW) Falling back to old probe method for armsoc
[116289.350] (II) No BusID or DriverName specified - opening /dev/dri/card0
[116289.350] (II) Got BusID platform:exynos-drm:00
[116289.382] (II) Opened DRM
[116289.383] (II) DeviceName is [/dev/dri/card0]
[116289.383] (II) bus_id is [platform:exynos-drm:00]
[116289.383] (II) DriverName is [exynos]
[116289.383] (II) version is [1.0.0]
[116289.384] (II) Screen:0, CRTC:-1
[116289.399] (II) ARMSOC(0): Creating default Display subsection in
Screen section
"Default Screen" for depth/fbbpp 24/32
[116289.399] (**) ARMSOC(0): Depth 24, (--) framebuffer bpp 32
[116289.400] (==) ARMSOC(0): RGB weight 888
[116289.400] (==) ARMSOC(0): Using gamma correction (1.0, 1.0, 1.0)
[116289.400] (==) ARMSOC(0): Default visual is TrueColor
[116289.400] (II) No BusID or DriverName specified - opening /dev/dri/card0
[116289.401] (II) Got BusID platform:exynos-drm:00
[116289.432] (II) Opened DRM
[116289.433] (II) DeviceName is [/dev/dri/card0]
[116289.433] (II) bus_id is [platform:exynos-drm:00]
[116289.433] (II) DriverName is [exynos]
[116289.433] (II) version is [1.0.0]
[116289.433] (WW) ARMSOC(0): WARNING: Failed to open /dev/umplock.
[116289.434] (II) ARMSOC(0): Chipset: Mali
[116289.434] (**) ARMSOC(0): Option "Debug" "false"
[116289.434] (II) ARMSOC(0): Buffer Flipping is Enabled
[116289.434] (II) ARMSOC(0): Setting the video modes ...
[116289.434] (II) ARMSOC(0): Adding all CRTCs
[116289.435] (II) ARMSOC(0): Got CRTC: 0 (id: 26)
[116289.435] (II) ARMSOC(0): Got CRTC: 1 (id: 32)
[116289.475] (II) ARMSOC(0): Output HDMI-1 has no monitor section
[116289.475] (II) ARMSOC(0): Output Unknown15-1 has no monitor section
[116289.515] (II) ARMSOC(0): EDID for output HDMI-1
[116289.515] (II) ARMSOC(0): Manufacturer: HWP Model: 3048 Serial#:
16843009
[116289.516] (II) ARMSOC(0): Year: 2014 Week: 15
[116289.516] (II) ARMSOC(0): EDID Version: 1.3
[116289.516] (II) ARMSOC(0): Digital Display Input
[116289.516] (II) ARMSOC(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[116289.516] (II) ARMSOC(0): Gamma: 2.20
[116289.516] (II) ARMSOC(0): DPMS capabilities: Off
[116289.517] (II) ARMSOC(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[116289.517] (II) ARMSOC(0): First detailed timing is preferred mode
[116289.517] (II) ARMSOC(0): redX: 0.641 redY: 0.337 greenX: 0.313
greenY: 0.623
[116289.517] (II) ARMSOC(0): blueX: 0.151 blueY: 0.070 whiteX: 0.313
whiteY: 0.329
[116289.517] (II) ARMSOC(0): Supported established timings:
[116289.517] (II) ARMSOC(0): 720x400@70Hz
[116289.518] (II) ARMSOC(0): 640x480@60Hz
[116289.518] (II) ARMSOC(0): 800x600@60Hz
[116289.518] (II) ARMSOC(0): 1024x768@60Hz
[116289.518] (II) ARMSOC(0): Manufacturer's mask: 0
[116289.518] (II) ARMSOC(0): Supported standard timings:
[116289.518] (II) ARMSOC(0): #0: hsize: 1920 vsize 1080 refresh: 60
vid: 49361
[116289.518] (II) ARMSOC(0): #1: hsize: 1280 vsize 720 refresh: 60
vid: 49281
[116289.519] (II) ARMSOC(0): #2: hsize: 1280 vsize 1024 refresh: 60
vid: 32897
[116289.519] (II) ARMSOC(0): #3: hsize: 1440 vsize 900 refresh: 60
vid: 149
[116289.519] (II) ARMSOC(0): #4: hsize: 1600 vsize 900 refresh: 60
vid: 49321
[116289.519] (II) ARMSOC(0): #5: hsize: 1680 vsize 1050 refresh: 60
vid: 179
[116289.519] (II) ARMSOC(0): Supported detailed timing:
[116289.519] (II) ARMSOC(0): clock: 148.5 MHz Image Size: 480 x 270 mm
[116289.520] (II) ARMSOC(0): h_active: 1920 h_sync: 2008 h_sync_end
2052 h_blank_end 2200 h_border: 0
[116289.520] (II) ARMSOC(0): v_active: 1080 v_sync: 1084 v_sync_end
1089 v_blanking: 1125 v_border: 0
[116289.520] (II) ARMSOC(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H
max: 94 kHz, PixClock max 175 MHz
[116289.520] (II) ARMSOC(0): Monitor name: HP 22bw
[116289.520] (II) ARMSOC(0): Serial No: 3CM4150X8P
[116289.521] (II) ARMSOC(0): Supported detailed timing:
[116289.521] (II) ARMSOC(0): clock: 148.5 MHz Image Size: 480 x 270 mm
[116289.521] (II) ARMSOC(0): h_active: 1920 h_sync: 2008 h_sync_end
2052 h_blank_end 2200 h_border: 0
[116289.521] (II) ARMSOC(0): v_active: 1080 v_sync: 1084 v_sync_end
1089 v_blanking: 1125 v_border: 0
[116289.521] (II) ARMSOC(0): Supported detailed timing:
[116289.521] (II) ARMSOC(0): clock: 148.5 MHz Image Size: 480 x 270 mm
[116289.522] (II) ARMSOC(0): h_active: 1920 h_sync: 2448 h_sync_end
2492 h_blank_end 2640 h_border: 0
[116289.522] (II) ARMSOC(0): v_active: 1080 v_sync: 1084 v_sync_end
1089 v_blanking: 1125 v_border: 0
[116289.522] (II) ARMSOC(0): Supported detailed timing:
[116289.522] (II) ARMSOC(0): clock: 74.2 MHz Image Size: 480 x 270 mm
[116289.522] (II) ARMSOC(0): h_active: 1280 h_sync: 1390 h_sync_end
1430 h_blank_end 1650 h_border: 0
[116289.523] (II) ARMSOC(0): v_active: 720 v_sync: 725 v_sync_end 730
v_blanking: 750 v_border: 0
[116289.523] (II) ARMSOC(0): Supported detailed timing:
[116289.523] (II) ARMSOC(0): clock: 74.2 MHz Image Size: 480 x 270 mm
[116289.523] (II) ARMSOC(0): h_active: 1280 h_sync: 1720 h_sync_end
1760 h_blank_end 1980 h_border: 0
[116289.523] (II) ARMSOC(0): v_active: 720 v_sync: 725 v_sync_end 730
v_blanking: 750 v_border: 0
[116289.524] (II) ARMSOC(0): Supported detailed timing:
[116289.524] (II) ARMSOC(0): clock: 27.0 MHz Image Size: 480 x 270 mm
[116289.524] (II) ARMSOC(0): h_active: 720 h_sync: 736 h_sync_end 798
h_blank_end 858 h_border: 0
[116289.524] (II) ARMSOC(0): v_active: 480 v_sync: 489 v_sync_end 495
v_blanking: 525 v_border: 0
[116289.524] (II) ARMSOC(0): Number of EDID sections to follow: 1
[116289.525] (II) ARMSOC(0): EDID (in hex):
[116289.525] (II) ARMSOC(0): 00ffffffffffff0022f0483001010101
[116289.525] (II) ARMSOC(0): 0f18010380301b782a16c5a456509f26
[116289.525] (II) ARMSOC(0): 125054a10800d1c081c081809500a9c0
[116289.525] (II) ARMSOC(0): b30001010101023a801871382d40582c
[116289.525] (II) ARMSOC(0): 4500e00e1100001a000000fd00324c18
[116289.526] (II) ARMSOC(0): 5e11000a202020202020000000fc0048
[116289.526] (II) ARMSOC(0): 5020323262770a2020202020000000ff
[116289.526] (II) ARMSOC(0): 0033434d34313530583850202020010f
[116289.526] (II) ARMSOC(0): 020314b249909f041303021211016503
[116289.526] (II) ARMSOC(0): 0c001000023a801871382d40582c4500
[116289.526] (II) ARMSOC(0): e00e1100001e023a80d072382d40102c
[116289.527] (II) ARMSOC(0): 4580e00e1100001e011d007251d01e20
[116289.527] (II) ARMSOC(0): 6e285500e00e1100001e011d00bc52d0
[116289.527] (II) ARMSOC(0): 1e20b8285540e00e1100001e8c0ad08a
[116289.527] (II) ARMSOC(0): 20e02d10103e9600e00e110000180000
[116289.527] (II) ARMSOC(0): 0000000000000000000000000000007d
[116289.527] (II) ARMSOC(0): EDID vendor "HWP", prod id 12360
[116289.528] (II) ARMSOC(0): Using EDID range info for horizontal sync
[116289.528] (II) ARMSOC(0): Using EDID range info for vertical refresh
[116289.528] (II) ARMSOC(0): Printing DDC gathered Modelines:
[116289.529] (II) ARMSOC(0): Modeline "1920x1080"x0.0 148.50 1920 2008
2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
[116289.529] (II) ARMSOC(0): Modeline "1920x1080"x0.0 148.50 1920 2008
2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[116289.529] (II) ARMSOC(0): Modeline "1920x1080"x0.0 148.50 1920 2448
2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[116289.529] (II) ARMSOC(0): Modeline "1280x720"x0.0 74.25 1280 1390
1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[116289.529] (II) ARMSOC(0): Modeline "1280x720"x0.0 74.25 1280 1720
1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[116289.529] (II) ARMSOC(0): Modeline "720x480"x0.0 27.00 720 736 798
858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[116289.530] (II) ARMSOC(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[116289.530] (II) ARMSOC(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[116289.530] (II) ARMSOC(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[116289.530] (II) ARMSOC(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[116289.530] (II) ARMSOC(0): Modeline "1920x1080"x60.0 172.80 1920
2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[116289.531] (II) ARMSOC(0): Modeline "1280x720"x60.0 74.48 1280 1336
1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[116289.531] (II) ARMSOC(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[116289.531] (II) ARMSOC(0): Modeline "1440x900"x0.0 88.75 1440 1488
1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[116289.531] (II) ARMSOC(0): Modeline "1600x900"x60.0 119.00 1600 1696
1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[116289.531] (II) ARMSOC(0): Modeline "1680x1050"x0.0 119.00 1680 1728
1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[116289.532] (II) ARMSOC(0): Modeline "720x576"x0.0 27.00 720 732 796
864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[116289.532] (II) ARMSOC(0): Modeline "1920x1080"x0.0 74.25 1920 2558
2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[116289.532] (II) ARMSOC(0): Modeline "1920x1080i"x0.0 74.25 1920
2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[116289.532] (II) ARMSOC(0): Modeline "1920x1080i"x0.0 74.25 1920
2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[116289.533] (II) ARMSOC(0): Printing probed modes for output HDMI-1
[116289.533] (II) ARMSOC(0): Modeline "1920x1080"x60.0 148.50 1920
2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
[116289.533] (II) ARMSOC(0): Modeline "1920x1080"x60.0 148.50 1920
2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[116289.533] (II) ARMSOC(0): Modeline "1920x1080"x50.0 148.50 1920
2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[116289.533] (II) ARMSOC(0): Modeline "1600x900"x60.0 108.00 1600 1624
1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[116289.533] (II) ARMSOC(0): Modeline "1280x1024"x60.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[116289.534] (II) ARMSOC(0): Modeline "1440x900"x59.9 88.75 1440 1488
1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[116289.534] (II) ARMSOC(0): Modeline "1280x720"x60.0 74.25 1280 1390
1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[116289.534] (II) ARMSOC(0): Modeline "1280x720"x50.0 74.25 1280 1720
1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[116289.534] (II) ARMSOC(0): Modeline "1280x720"x59.9 74.18 1280 1390
1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[116289.534] (II) ARMSOC(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[116289.535] (II) ARMSOC(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[116289.535] (II) ARMSOC(0): Modeline "720x576"x50.0 27.00 720 732
796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[116289.535] (II) ARMSOC(0): Modeline "720x480"x60.0 27.03 720 736
798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[116289.535] (II) ARMSOC(0): Modeline "720x480"x59.9 27.00 720 736
798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[116289.535] (II) ARMSOC(0): Modeline "640x480"x60.0 25.20 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[116289.536] (II) ARMSOC(0): EDID for output Unknown15-1
[116289.536] (II) ARMSOC(0): Output HDMI-1 connected
[116289.536] (II) ARMSOC(0): Output Unknown15-1 disconnected
[116289.536] (II) ARMSOC(0): Using exact sizes for initial modes
[116289.536] (II) ARMSOC(0): Output HDMI-1 using initial mode 1920x1080 +0+0
[116289.536] (II) ARMSOC(0): Got KMS resources
[116289.537] (**) ARMSOC(0): Display dimensions: (480, 270) mm
[116289.537] (**) ARMSOC(0): DPI set to (101, 101)
[116289.537] (II) Loading sub module "dri2"
[116289.537] (II) LoadModule: "dri2"
[116289.537] (II) Module "dri2" already built-in
[116289.537] (II) Loading sub module "exa"
[116289.538] (II) LoadModule: "exa"
[116289.539] (II) Loading /usr/lib/xorg/modules/libexa.so
[116289.541] (II) Module exa: vendor="X.Org Foundation"
[116289.541] compiled for 1.18.4, module version = 2.6.0
[116289.541] ABI class: X.Org Video Driver, version 20.0
[116289.541] (II) Loading sub module "fb"
[116289.541] (II) LoadModule: "fb"
[116289.543] (II) Loading /usr/lib/xorg/modules/libfb.so
[116289.546] (II) Module fb: vendor="X.Org Foundation"
[116289.546] compiled for 1.18.4, module version = 1.0.0
[116289.546] ABI class: X.Org ANSI C Emulation, version 0.4
[116289.546] (--) Depth 24 pixmap format is 32 bpp
[116289.626] (EE) _CREATE_GEM({height: 1080, width: 1920, bpp: 32
buf_type: 0x0}) failed. errno: 12 - Cannot allocate memory
[116289.626] (EE) ARMSOC(0): ERROR: Cannot allocate scanout buffer
[116289.627] (EE)
Fatal server error:
[116289.627] (EE) AddScreen/ScreenInit failed for driver 0
[116289.628] (EE)
[116289.629] (EE)
Please consult the Fedora Project support
at http://wiki.x.org
for help.
[116289.630] (EE) Please also check the log file at
"/var/log/Xorg.0.log" for additional information.
[116289.631] (EE)
[116289.799] (EE) Server terminated with error (1). Closing log file.
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://lists.fedoraproject.org/admin/lists/arm@xxxxxxxxxxxxxxxxxxxxxxx
