On Wed, May 18, 2016 at 1:52 PM, Steven Falco <stevenfalco@xxxxxxxxx> wrote: > Recently I upgraded my wandboard quad to Fedora 24 beta. Since I did that, I can > no longer reboot the machine without getting a kernel crash. This happens 100% > of the time. > > I filed a bug: > > https://bugzilla.redhat.com/show_bug.cgi?id=1336127 > > You can see the whole reboot log in the above bug - here is part of the log to > give a flavor of what is happening. It looks like the bug originates when the > USB driver for the root device is shut down. I do not have any external USB > devices connected to the machine. > > [190129.856042] systemd-shutdown[1]: Rebooting. > [190129.864389] ci_hdrc ci_hdrc.1: remove, state 4 > [190129.868951] usb usb1: USB disconnect, device number 1 > [190129.874989] ci_hdrc ci_hdrc.1: USB bus 1 deregistered > [190129.880465] Unable to handle kernel NULL pointer dereference at virtual address 000000e0 > [190129.888651] pgd = ed4d0000 > [190129.891450] [000000e0] *pgd=00000000 > [190129.895136] Internal error: Oops: 5 [#1] SMP ARM > [190129.899845] Modules linked in: rpcsec_gss_krb5 snd_soc_fsl_ssi snd_soc_fsl_spdif imx_pcm_fiq snd_soc_fsl_asrc caam_jr snd_soc_imx_sgtl5000 dw_hdmi_ahb_audio coda snd_soc_sgtl5000 imx_pcm_dma snd_soc_imx_spdif snd_soc_fsl_asoc_card snd_soc_core imx_ipuv3_crtc snd_pcm_dmaengine snd_ac97_codec ac97_bus snd_seq v4l2_mem2mem snd_seq_device snd_pcm videobuf2_vmalloc dw_hdmi_imx snd_timer ci_hdrc_imx nvmem_imx_ocotp snd videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 ci_hdrc videobuf2_core dw_hdmi nvmem_core udc_core v4l2_common snd_soc_imx_audmux soundcore caam imx_ipu_v3 usbmisc_imx imx_sdma videodev imx2_wdt imx_thermal media etnaviv nfsd mmc_block at803x ahci_imx i2c_imx libahci_platform sdhci_esdhc_imx fec sdhci_pltfm ptp sdhci pps_core mmc_core rtc_snvs imxdrm phy_mxs_usb drm_kms_helper anatop_regulator syscopyarea sysfillrect sysimgblt fb_sys_fops drm > [190129.976821] CPU: 2 PID: 1 Comm: systemd-shutdow Not tainted 4.5.4-300.fc24.armv7hl #1 > [190129.984744] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) > [190129.991366] task: ee920000 ti: ee91a000 task.ti: ee91a000 > [190129.996866] PC is at usb_hcd_irq+0xc/0x40 > [190130.000978] LR is at __free_irq+0x1cc/0x290 > [190130.005256] pc : [<c06e59fc>] lr : [<c02a2454>] psr: a00b0093 > [190130.005256] sp : ee91bd68 ip : 00000000 fp : c066431c > [190130.016914] r10: ed718018 r9 : 600b0013 r8 : ed718018 > [190130.022229] r7 : 200b0013 r6 : 0000011c r5 : dfaf4380 r4 : eea9df00 > [190130.028847] r3 : ed719018 r2 : 00000000 r1 : 00000000 r0 : 0000011c > [190130.035466] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none > [190130.042779] Control: 10c5387d Table: 3d4d004a DAC: 00000051 > [190130.048616] Process systemd-shutdow (pid: 1, stack limit = 0xee91a220) > > In the ARM status meeting, a request was made to report issues with kernel 4.6, > so I tried upgrading to the 4.6.0-1.fc25.armv7hl build. This did _not_ fix the > issue. It still crashes 100% of the time when rebooting. > > When this crash happens, the machine hangs, and I have to press the reset button to > get the machine running again. > > This machine was working properly with Fedora 23. Reboots always worked correctly. This is a kernel issue, not a release issue, so if you upgrade F-23 to the 4.5.x kernel you'd likely get the same issue. I've got it on my todo list to look at. _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx http://lists.fedoraproject.org/admin/lists/arm@xxxxxxxxxxxxxxxxxxxxxxx
