F23 on Wandboard Quad -- kernel doesn't start?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I'm trying to run F23 on a Wandboard Quad, but it's not booting.  It
hangs after the "Starting kernel" output.

I followed the instructions at
https://fedoraproject.org/wiki/Architectures/ARM/F23/Installation#For_the_Wandboard_.28Freescale_i.MX6.29
starting from Fedora-Minimal-armhfp-23-10-sda.raw.xz I installed the
image, then copied in the SPL and u-boot.img.  But when I try to boot my
wandboard I get:

U-Boot SPL 2015.07 (Sep 12 2015 - 11:53:19)                                     
                                                                                
                                                                                
U-Boot 2015.07 (Sep 12 2015 - 11:53:19 +0000)                                   
                                                                                
CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)                     
Reset cause: POR                                                                
Board: Wandboard rev C1                                                         
I2C:   ready                                                                    
DRAM:  2 GiB                                                                    
MMC:   FSL_SDHC: 0, FSL_SDHC: 1                                                 
*** Warning - bad CRC, using default environment                                
                                                                                
No panel detected: default to HDMI                                              
Display: HDMI (1024x768)                                                        
In:    serial                                                                   
Out:   serial                                                                   
Err:   serial                                                                   
Net:   FEC [PRIME]                                                              
Hit any key to stop autoboot:  0                                                
switch to partitions #0, OK                                                     
mmc0 is current device                                                          
Scanning mmc 0:1...                                                             
Found /extlinux/extlinux.conf                                                   
Retrieving file: /extlinux/extlinux.conf                                        
518 bytes read in 49 ms (9.8 KiB/s)                                             
Ignoring unknown command: ui                                                    
Ignoring malformed menu command:  autoboot                                      
Ignoring malformed menu command:  hidden                                        
Ignoring unknown command: totaltimeout                                          
Fedora-Minimal-armhfp-23-10 Boot Options.                                       
1:      Fedora-Minimal-armhfp-23-10 (4.2.3-300.fc23.armv7hl)                    
Enter choice: 1:        Fedora-Minimal-armhfp-23-10 (4.2.3-300.fc23.armv7hl)    
Retrieving file: /initramfs-4.2.3-300.fc23.armv7hl.img                          
38958034 bytes read in 1833 ms (20.3 MiB/s)                                     
Retrieving file: /vmlinuz-4.2.3-300.fc23.armv7hl                                
5811776 bytes read in 307 ms (18.1 MiB/s)                                       
append: enforcing=0 ro root=UUID=b2c019d9-2401-4a22-9a40-36a92a00cdfe           
Retrieving file: /dtb-4.2.3-300.fc23.armv7hl/imx6q-wandboard.dtb                
30792 bytes read in 1235 ms (23.4 KiB/s)                                        
Kernel image @ 0x11000000 [ 0x000000 - 0x58ae40 ]                               
## Flattened Device Tree blob at 18000000                                       
   Booting using the fdt blob at 0x18000000                                     
   Loading Ramdisk to 2dad8000, end 2ffff3d2 ... OK                             
   Loading Device Tree to 2dacd000, end 2dad7847 ... OK                         
                                                                                
Starting kernel ...                                                             
                                                                                
And then the system just sits and hangs..  Is this a known problem?
I tried with two different SD cards and both fail.

I could certainly revert back to F22, but why start 6-months behind?

-derek
-- 
       Derek Atkins, SB '93 MIT EE, SM '95 MIT Media Laboratory
       Member, MIT Student Information Processing Board  (SIPB)
       URL: http://web.mit.edu/warlord/    PP-ASEL-IA     N1NWH
       warlord@xxxxxxx                        PGP key available
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
http://lists.fedoraproject.org/admin/lists/arm@xxxxxxxxxxxxxxxxxxxxxxx




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM (Vger)]     [Linux ARM]     [ARM Kernel]     [Fedora User Discussion]     [Older Fedora Users Discussion]     [Fedora Advisory Board]     [Fedora Security]     [Fedora Maintainers]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Mentors]     [Fedora Package Announce]     [Fedora Package Review]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Coolkey]     [Yum Users]     [Tux]     [Yosemite News]     [Linux Apps]     [KDE Users]     [Fedora Tools]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]

Powered by Linux