On Wed, Sep 16, 2015 at 10:00 PM, Robert Moskowitz <rgm@xxxxxxxxxxxxxxx> wrote: > I went searching for information on sata port multiplier and found: > > http://www.spinics.net/lists/arm-kernel/msg377619.html > > Is this still the status of this and if so how do I set AHCI_HFLAG_NO_PMP to > true? Well if you read the message you reference it states: "So add a module parameter to enable pmp usage, and default this to off, so that directly attached disks keep working normally." So it seems if you use a multiple you need to do a different option than without so it indicates it would need it. If you do "modinfo ahci_sunxi" you'll see that actually the patch has landed and there is a enable_pmp parameter. So you'll need to create something like /etc/modprobe.d/sunxi.conf and add a line "options ahci_sunxi enable_pmp=1" line (no I've not verified that is correct so you'll need to check it) and reboot. Peter > But it seems there were more messages about this... > > > On 09/16/2015 03:34 PM, Robert Moskowitz wrote: >> >> I figured out the various ports on the muitiport card and have 2 sata >> drives I am testing with. >> >> One drive works fine. But two drives it is a bit of a guess which one >> will come in as /dev/sda (the mSD card is /dev/mmcblk0). And only one drive >> is visible. Or at least gparted is only seeing one. >> >> From messages back last fall? I had that this board would let me use >> multiple sata drives, so there seems to be something I am missing. >> >> Right now each item has its own power supply: Cubietruck, Multiport card, >> Drive1, and Drive2. So it is not a power issue (or shouldn't be). >> >> >> _______________________________________________ >> arm mailing list >> arm@xxxxxxxxxxxxxxxxxxxxxxx >> https://admin.fedoraproject.org/mailman/listinfo/arm > > > _______________________________________________ > arm mailing list > arm@xxxxxxxxxxxxxxxxxxxxxxx > https://admin.fedoraproject.org/mailman/listinfo/arm _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
