Thank you for the head start.
Yes, I suspected I would find the problem in panda.c. I was planning to do a diff of that file between the versions and see if anything jumped out at me.
I should be able to get it sorted this weekend. I'll let you know what I find.
Thanks again.
-------- Original Message --------
Subject: Re: [fedora-arm] Source, patches, config for u-boot
From: Peter Robinson <pbrobinson@xxxxxxxxx>
Date: Fri, August 21, 2015 1:58 am
To: dbatzle@xxxxxxxxxxxx
Cc: arm@xxxxxxxxxxxxxxxxxxxxxxx
On Fri, Aug 21, 2015 at 3:26 AM, <dbatzle@xxxxxxxxxxxx> wrote:
> I was wondering if I could get the source and configuration files that are
> used to build u-boot for Fedora on ARM.
It's all in the Fedora package repository for uboot-tools.
"fedpkg clone uboot-tools; cd uboot-tools; fedpkg prep" will get you a
fully patched tree.
> I have a Pandaboard ES. Fedora 21 runs fine on it. Fedora 22 will not boot
> out of the box. U-boot loads omap4-panda.dtb instead of omap4-panda-es.dtb.
> If I rename the es dtb file the kernel still hangs, it just runs longer
> before it hangs.
Yes, it's a problem even with vanilla upstream. I see it on my
Panda-ES too but just ran out of time to get to the bottom of the
problem with it. I did report it upstream [1] but never got a response
but I suspect there's some issue in the board/ti/panda/panda.c which
might not be setting up the board specifics
You can interrupt the boot and run the command "setenv fdtfile
omap4-panda-es.dtb" and then just run "boot" and it'll have the
correct .dtb set and it might get you further and might help you
debug.
[1] http://lists.denx.de/pipermail/u-boot/2015-July/219376.html
> I have successfully booted 22 by using u-boot 2014.10 from Fedora 21.
>
> I have u-boot source from git.denx.de and have applied patches from rcn-ee
> but the resulting u-boot does not work on the Fedora /boot image.
>
> I suppose I could wait for Fedora 23 but I would like to dig into this a
> more.
You could test the 2015.04 rc1 in F-24 on F-22 and see if it's fixed
it, I've been traveling and not had time to look at it closer.
Peter
_______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm