Re: Pi2B remix

[Robert Knight <knight@xxxxxxxxxxxxx>]

It booted for me when I applied power after writing the unxz'ed image to 
an 8 GB SD card.

I am have quite a bit of trouble with the Ethernet, though.  I can force 
it to be alive by providing enough information for NetworkManager to 
configure it, but I lose 90% or more of the packets to a host on the 
same switch.

Regards,
Robert

On 2/13/2015 5:10 AM, Adrian wrote:
> Any trick in getting this to boot ?
>
> Adrian ... vk4tux
>
> On 13/02/15 18:14, Udo Seidel wrote:
> > Great work!
> > Thx
> >
> > On Wed, 11 Feb 2015, Clive Messer wrote:
> >
> > > Peter,
> > >
> > > Following on from our discussion yesterday, and CC'd to fedora-arm
> > > mailing list, I've uploaded an image.
> > >
> > > http://www.digitaldreamtime.co.uk/Fedora/Pi2B-Minimal-armhfp-21-5-20150211-1.img.xz 
> > >
> > >
> > > This is based on the F21 Minimal image with minimal changes. Initial
> > > setup hasn't run, selinux is disabled, firewalld is masked, and root
> > > password is fedora. Otherwise, it is the "stock" image, yum updated
> > > today, minus the "stock" kernel, instead using raspberrypi-kernel
> > > package, which was based on the original Pidora package and modified.
> > > (Same goes for raspberrypi-vc firmware package. Also originated from
> > > Seneca and somewhat modified. ;)) I also added a raspberry-pi-local
> > > package to collect together all the config stuff, specific to Pi so 
> > > it's
> > > part of a package.... Figured that would make it easier to compose a
> > > spin/remix from scratch....
> > >
> > > Specific to supporting the 2B....
> > >
> > > SRPMS....
> > > http://www.squeezecommunity.org/repo/21/pi/SRPMS/raspberrypi-kernel-3.18.6-503.20150207gitc799e6e.sc20.src.rpm 
> > >
> > > http://www.squeezecommunity.org/repo/21/pi/SRPMS/raspberrypi-vc-20150207gitd10602a-502.sc20.src.rpm 
> > >
> > > http://www.squeezecommunity.org/repo/21/pi/SRPMS/raspberrypi-local-1.0-1.fc21.src.rpm 
> > >
> > >
> > > RPMS....
> > > http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-kernel-3.18.6-503.20150207gitc799e6e.sc20.armv7hl.rpm 
> > >
> > > http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-kernel-devel-3.18.6-503.20150207gitc799e6e.sc20.armv7hl.rpm 
> > >
> > > http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-kernel-headers-3.18.6-503.20150207gitc799e6e.sc20.armv7hl.rpm 
> > >
> > > http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-demo-source-20150207gitd10602a-502.sc20.armv7hl.rpm 
> > >
> > > http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-firmware-20150207gitd10602a-502.sc20.armv7hl.rpm 
> > >
> > > http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-libs-20150207gitd10602a-502.sc20.armv7hl.rpm 
> > >
> > > http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-libs-devel-20150207gitd10602a-502.sc20.armv7hl.rpm 
> > >
> > > http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-static-20150207gitd10602a-502.sc20.armv7hl.rpm 
> > >
> > > http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-utils-20150207gitd10602a-502.sc20.armv7hl.rpm 
> > >
> > > http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-local-1.0-1.fc21.noarch.rpm 
> > >
> > >
> > > I'll follow-up this post when I have time, with my notes, which are
> > > fairly comprehensive.
> > >
> > > Regards
> > >
> > > Clive
> > > --
> > > Clive Messer <clive.m.messer@xxxxxxxxx>
> > >
> > >
> > >
> > > _______________________________________________
> > > arm mailing list
> > > arm@xxxxxxxxxxxxxxxxxxxxxxx
> > > https://admin.fedoraproject.org/mailman/listinfo/arm
> > _______________________________________________
> > arm mailing list
> > arm@xxxxxxxxxxxxxxxxxxxxxxx
> > https://admin.fedoraproject.org/mailman/listinfo/arm
>
> _______________________________________________
> arm mailing list
> arm@xxxxxxxxxxxxxxxxxxxxxxx
> https://admin.fedoraproject.org/mailman/listinfo/arm


_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm