Just "dd" and off you go :-)
On Fri, 13 Feb 2015, Michael Horne wrote:
This is fantastic news!
is this just a matter of DD the .img to my SD card or do I have to use the
fedora-arm-installer with the .xz and choose a 'u-boot'?
I anticipate my weekend activities will be consumed by this email...
Thanks
Michael
On 13/02/15 08:14, Udo Seidel wrote:
Great work!
Thx
On Wed, 11 Feb 2015, Clive Messer wrote:
> Peter,
>
> Following on from our discussion yesterday, and CC'd to fedora-arm
> mailing list, I've uploaded an image.
>
> http://www.digitaldreamtime.co.uk/Fedora/Pi2B-Minimal-armhfp-21-5-20150211-1.img.xz
>
>
> This is based on the F21 Minimal image with minimal changes. Initial
> setup hasn't run, selinux is disabled, firewalld is masked, and root
> password is fedora. Otherwise, it is the "stock" image, yum updated
> today, minus the "stock" kernel, instead using raspberrypi-kernel
> package, which was based on the original Pidora package and modified.
> (Same goes for raspberrypi-vc firmware package. Also originated from
> Seneca and somewhat modified. ;)) I also added a raspberry-pi-local
> package to collect together all the config stuff, specific to Pi so it's
> part of a package.... Figured that would make it easier to compose a
> spin/remix from scratch....
>
> Specific to supporting the 2B....
>
> SRPMS....
> http://www.squeezecommunity.org/repo/21/pi/SRPMS/raspberrypi-kernel-3.18.6-503.20150207gitc799e6e.sc20.src.rpm
>
> http://www.squeezecommunity.org/repo/21/pi/SRPMS/raspberrypi-vc-20150207gitd10602a-502.sc20.src.rpm
>
> http://www.squeezecommunity.org/repo/21/pi/SRPMS/raspberrypi-local-1.0-1.fc21.src.rpm
>
>
> RPMS....
> http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-kernel-3.18.6-503.20150207gitc799e6e.sc20.armv7hl.rpm
>
> http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-kernel-devel-3.18.6-503.20150207gitc799e6e.sc20.armv7hl.rpm
>
> http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-kernel-headers-3.18.6-503.20150207gitc799e6e.sc20.armv7hl.rpm
>
> http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-demo-source-20150207gitd10602a-502.sc20.armv7hl.rpm
>
> http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-firmware-20150207gitd10602a-502.sc20.armv7hl.rpm
>
> http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-libs-20150207gitd10602a-502.sc20.armv7hl.rpm
>
> http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-libs-devel-20150207gitd10602a-502.sc20.armv7hl.rpm
>
> http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-static-20150207gitd10602a-502.sc20.armv7hl.rpm
>
> http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-vc-utils-20150207gitd10602a-502.sc20.armv7hl.rpm
>
> http://www.squeezecommunity.org/repo/21/pi/arm/raspberrypi-local-1.0-1.fc21.noarch.rpm
>
>
> I'll follow-up this post when I have time, with my notes, which are
> fairly comprehensive.
>
> Regards
>
> Clive
> --
> Clive Messer <clive.m.messer@xxxxxxxxx>
>
>
>
> _______________________________________________
> arm mailing list
> arm@xxxxxxxxxxxxxxxxxxxxxxx
> https://admin.fedoraproject.org/mailman/listinfo/arm
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
